Bosch GAL 1210 CV Professional manual

Bosch GAL 1210 CV Professional
8.7 · 1
PDF manual
 · 60 pages
English
manualBosch GAL 1210 CV Professional
42 | Română

Date tehnice

Încărcător GAL1210CV
Clasa de protecţie
/ II
Curent de încărcare
A)
1,0A
Tensiune de încărcare a acumulatorului
(sesizare automată a tensiunii)
12V
A) în funcţie de temperatură şi de tipul de acumulator

Procesul de încărcare

u Atenţie la tensiunea de la reţea! Tensiunea sursei de
curent trebuie să coincidă cu datele de pe plăcuţa
indicatoare a tipului încărcătorului.
Procesul de încărcare începe imediat ce fişa de reţea a
încărcătorului este introdusă în priză, iar acumulatorul este
introdus în compartimentul de încărcare(1).
Procesul de încărcare este posibil numai dacă
temperatura acumulatorului se încadrează în intervalul
admis al temperaturilor de încărcare (0–45°C).
Pentru informaţii suplimentare, accesaţi
instrucţiunile de utilizare online:
www.bosch-pt.com/manuals

Remedierea defecţiunilor

Acumulatorul nu se încarcă

Acumulatorul nu se încarcă, iar indicatorul nivelului de
încărcare(2) este aprins continuu.
Cauză: Încărcătorul a detectat o eroare internă
Remediere: Asigură-te că toţi acumulatorii sunt introduşi
complet. Scoate din priză fişa de reţea şi introdu-o la loc. Dacă
eroarea apare din nou, solicită verificarea încărcătorului la un
centru de service autorizat pentru scule electriceBosch.

Indicatorul nu se aprinde

Nu se aprinde niciun indicator, acumulatorul nu se încarcă.
Cauză: Priza, cablul de alimentare electrică sau încărcătorul
sunt defecte
Remediere: Verifică tensiunea din reţeaua de alimentare cu
energie electrică. Dacă este necesar, solicită verificarea
încărcătorului la un centru de service autorizat.

Întreţinere şi service

Întreţinere şi curăţare

Dacă este necesară înlocuirea cablului de racordare, pentru a
evita periclitarea siguranţei în timpul utilizării, această operaţie
se va executa de către Bosch sau de către un centru de service
autorizat pentru scule electrice Bosch.

Serviciu de asistenţă tehnică post-vânzări şi

consultanţă clienţi

Serviciul nostru de asistenţă tehnică răspunde întrebărilor tale
atât în ceea ce priveşte întreţinerea şi repararea produsului tău,
cât şi referitor la piesele de schimb. Pentru desenele
descompuse şi informaţii privind piesele de schimb, poţi de
asemenea să accesezi:
www.bosch-pt.com
Echipa de consultanţă Bosch îţi stă cu plăcere la dispoziţie
pentru a te ajuta în chestiuni legate de produsele noastre şi
accesoriile acestora.
În caz de reclamaţii şi comenzi de piese de schimb, te rugăm să
specifici neapărat numărul de identificare compus din 10cifre,
indicat pe plăcuţa cu date tehnice a produsului.
România
Robert Bosch SRL
PT/MKV1-EA
Service scule electrice
Strada Horia Măcelariu Nr. 30–34, sector 1
013937 Bucureşti
Tel.: +40 21 405 7541
Fax: +40 21 233 1313
E-Mail: BoschServiceCenter@ro.bosch.com
www.bosch-pt.ro

Mai multe adrese ale unităţilor de service sunt

disponibile la:

www.bosch-pt.com/serviceaddresses

Eliminare

Încărcătoarele, accesoriile şi ambalajele trebuie direcţionate
către o staţie de revalorificare ecologică.
Nu eliminaţi încărcătorul ca pe un deşeu menajer!

Numai pentru ţărileUE:

Conform Directivei Europene 2012/19/UE privind deșeurile de
echipamente electrice și electronice și transpunerea acesteia în
legislația națională, încărcătoarele scoase din uz trebuie
colectate selectiv și direcționate către o stație de reciclare
ecologică.
În cazul eliminării necorespunzătoare, aparatele electrice şi
electronice pot avea un efect nociv asupra mediului şi sănătăţii
din cauza posibilei prezenţe a substanţelor periculoase.
1 609 92A 80F | (13.01.2023) Bosch Power Tools

View the manual for the Bosch GAL 1210 CV Professional here, for free. This manual comes under the category chargers for mobile devices and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Bosch GAL 1210 CV Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelGAL 1210 CV Professional
Productcharger for mobile device
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GAL 1210 CV Professional below.

How do I know if the Bosch GAL 1210 CV Professional charger is compatible with my mobile device?

To determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device, follow these steps: 1. Check the battery type: The Bosch GAL 1210 CV charger is designed specifically for charging rechargeable Bosch Li-Ion batteries. Ensure that your mobile device uses a compatible Li-Ion battery. 2. Verify the battery capacity: The charger is suitable for charging Bosch Li-Ion batteries with a capacity of 1.3 Ah or more. Make sure your mobile device battery meets this requirement. 3. Match the battery voltage: The voltage of the battery must match the battery charging voltage of the charger. Check the specifications of your mobile device battery and ensure it matches the charging voltage supported by the Bosch GAL 1210 CV charger. 4. Avoid charging non-rechargeable batteries: It is important to note that the Bosch GAL 1210 CV charger is only intended for charging rechargeable batteries. Do not attempt to charge non-rechargeable batteries with this charger. By following these steps, you can determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device.

Why is my mobile device not charging when connected to the Bosch GAL 1210 CV Professional charger?

There could be several reasons why your mobile device is not charging when connected to the Bosch GAL 1210 CV Professional charger. Here are some possible causes and solutions: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Check the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Verify compatibility: Make sure that your mobile device is compatible with the Bosch GAL 1210 CV charger. Refer to the device's user manual or specifications to confirm compatibility. 5. Check for firmware updates: Some mobile devices require firmware updates to work with certain chargers. Check if there are any available updates for your device and install them if necessary. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

How long does it take to fully charge a mobile device using the Bosch GAL 1210 CV Professional charger?

The Bosch GAL 1210 CV Professional charger is designed to charge Bosch Li-Ion batteries. The charging time for a mobile device connected to the charger depends on several factors, including the battery capacity and the current charging level of the battery. To estimate the charging time, follow these steps: 1. Check the battery capacity: Determine the capacity of your mobile device battery. This information is usually available in the device's specifications or user manual. 2. Calculate the charging time: The charging time can vary depending on the battery capacity and the charging current. As a general guideline, you can estimate the charging time by dividing the battery capacity by the charging current. For example, if your mobile device battery has a capacity of 2000mAh and the charger provides a charging current of 1000mA (1A), the estimated charging time would be approximately 2 hours. It's important to note that the actual charging time may vary depending on the battery condition, temperature, and other factors. It's recommended to monitor the charging process and disconnect the device once it reaches a full charge to avoid overcharging. Please refer to the device's user manual or contact the manufacturer for more specific information regarding the charging time for your mobile device using the Bosch GAL 1210 CV Professional charger.

What should I do if the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger?

If the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger, you can try the following steps to troubleshoot the issue: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the battery. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if it resumes properly. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Why is the charging indicator on the Bosch GAL 1210 CV Professional charger not turning on when I connect my mobile device?

If the charging indicator on the Bosch GAL 1210 CV Professional charger is not turning on when you connect your mobile device, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the mobile device. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 4. Check the battery status: Ensure that the battery of your mobile device has enough charge to initiate the charging process. If the battery is completely drained, the charging indicator may not turn on immediately. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if the indicator turns on. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Is the manual of the Bosch GAL 1210 CV Professional available in English?

Yes, the manual of the Bosch GAL 1210 CV Professional is available in English .

Is your question not listed? Ask your question here

No results