Bosch GAL 1210 CV Professional manual

Bosch GAL 1210 CV Professional
8.7 · 1
PDF manual
 · 60 pages
English
manualBosch GAL 1210 CV Professional
36 | Русский

Процесс зарядки

u Учитывайте напряжение в сети! Напряжение источника
тока должно соответствовать данным на заводской та-
бличке зарядного устройства.
Зарядка начинается, когда сетевой штекер зарядного
устройства подключен к розетке, а аккумулятор вставлен в
зарядное гнездо (1).
Зарядка возможна, только если температура аккуму-
лятора находится в допустимом диапазоне темпера-
тур (0–45°C).
Чтобы получить дополнительную информа-
цию, перейдите по ссылке в электронное руко-
водство по эксплуатации:
www.bosch-pt.com/manuals

Устранение неисправностей

Аккумулятор не заряжается

Аккумулятор не заряжается, и индикатор заряда(2)
постоянно горит.
Причина: зарядное устройство выявило внутреннюю ошиб-
ку
Способ устранения: убедитесь, что все аккумуляторы уста-
новлены полностью. Отключите штепсельную вилку и снова
подключите ее. Если ошибка повторяется, отдайте зарядное
устройство на проверку в авторизованную сервисную ма-
стерскую дляBosch электроинструментов.

Индикаторы не горят

Индикаторы не горят, аккумулятор не заряжается.
Причина: неисправность розетки, кабеля питания или за-
рядного устройства
Способ устранения: проверьте напряжение в сети. При
необходимости проверьте зарядное устройство в авторизо-
ванном сервисном центре.

Техобслуживание и сервис

Техобслуживание и очистка

Если требуется поменять шнур, во избежание опасности об-
ращайтесь на фирму Bosch или в авторизованную сервис-
ную мастерскую для электроинструментов Bosch.

Сервис и консультирование по вопросам

применения

Сервисный отдел ответит на все Ваши вопросы по ремонту
и обслуживанию Вашего продукта, а также по запчастям.
Изображения с пространственным разделением делатей и
информацию по запчастям можно посмотреть также по ад-
ресу:
www.bosch-pt.com
Коллектив сотрудников Bosch, предоставляющий
консультации на предмет использования продукции, с удо-
вольствием ответит на все Ваши вопросы относительного
нашей продукции и ее принадлежностей.
Пожалуйста, во всех запросах и заказах запчастей обяза-
тельно указывайте 10-значный товарный номер по за-
водской табличке изделия.
Для региона: Россия, Беларусь, Казахстан, Украина
Гарантийное обслуживание и ремонт электроинструмента, с
соблюдением требований и норм изготовителя про-
изводятся на территории всех стран только в фирменных
или авторизованных сервисных центрах «Роберт Бош».
ПРЕДУПРЕЖДЕНИЕ! Использование контрафактной про-
дукции опасно в эксплуатации, может привести к ущербу
для Вашего здоровья. Изготовление и распространение
контрафактной продукции преследуется по Закону в ад-
министративном и уголовном порядке.
Россия
Уполномоченная изготовителем организация:
ООО «Роберт Бош» Вашутинское шоссе, вл. 24
141400, г. Химки, Московская обл.
Тел.: +7 800 100 8007
E-Mail: info.powertools@ru.bosch.com
www.bosch-pt.ru

Дополнительные адреса сервисных центров вы

найдете по ссылке:

www.bosch-pt.com/serviceaddresses

Утилизация

Отслужившие свой срок зарядные устройства, принадлеж-
ности и упаковку следует сдавать на экологически чистую
переработку отходов.
Утилизируйте зарядные устройства отдельно
от бытового мусора!

Только для стран-членовЕС:

В соответствии с Европейской директивой 2012/19/EU об
отработанных электрических и электронных приборах и ее
преобразованием в национальное законодательство негод-
ные зарядные устройства нужно собирать отдельно и сда-
вать на экологически чистую переработку.
При неправильной утилизации отработанные электриче-
ские и электронные приборы могут оказать вредное воздей-
ствие на окружающую среду и здоровье человека из-за воз-
можного присутствия в них опасных веществ.
1 609 92A 80F | (13.01.2023) Bosch Power Tools

View the manual for the Bosch GAL 1210 CV Professional here, for free. This manual comes under the category chargers for mobile devices and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Bosch GAL 1210 CV Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelGAL 1210 CV Professional
Productcharger for mobile device
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GAL 1210 CV Professional below.

How do I know if the Bosch GAL 1210 CV Professional charger is compatible with my mobile device?

To determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device, follow these steps: 1. Check the battery type: The Bosch GAL 1210 CV charger is designed specifically for charging rechargeable Bosch Li-Ion batteries. Ensure that your mobile device uses a compatible Li-Ion battery. 2. Verify the battery capacity: The charger is suitable for charging Bosch Li-Ion batteries with a capacity of 1.3 Ah or more. Make sure your mobile device battery meets this requirement. 3. Match the battery voltage: The voltage of the battery must match the battery charging voltage of the charger. Check the specifications of your mobile device battery and ensure it matches the charging voltage supported by the Bosch GAL 1210 CV charger. 4. Avoid charging non-rechargeable batteries: It is important to note that the Bosch GAL 1210 CV charger is only intended for charging rechargeable batteries. Do not attempt to charge non-rechargeable batteries with this charger. By following these steps, you can determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device.

Why is my mobile device not charging when connected to the Bosch GAL 1210 CV Professional charger?

There could be several reasons why your mobile device is not charging when connected to the Bosch GAL 1210 CV Professional charger. Here are some possible causes and solutions: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Check the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Verify compatibility: Make sure that your mobile device is compatible with the Bosch GAL 1210 CV charger. Refer to the device's user manual or specifications to confirm compatibility. 5. Check for firmware updates: Some mobile devices require firmware updates to work with certain chargers. Check if there are any available updates for your device and install them if necessary. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

How long does it take to fully charge a mobile device using the Bosch GAL 1210 CV Professional charger?

The Bosch GAL 1210 CV Professional charger is designed to charge Bosch Li-Ion batteries. The charging time for a mobile device connected to the charger depends on several factors, including the battery capacity and the current charging level of the battery. To estimate the charging time, follow these steps: 1. Check the battery capacity: Determine the capacity of your mobile device battery. This information is usually available in the device's specifications or user manual. 2. Calculate the charging time: The charging time can vary depending on the battery capacity and the charging current. As a general guideline, you can estimate the charging time by dividing the battery capacity by the charging current. For example, if your mobile device battery has a capacity of 2000mAh and the charger provides a charging current of 1000mA (1A), the estimated charging time would be approximately 2 hours. It's important to note that the actual charging time may vary depending on the battery condition, temperature, and other factors. It's recommended to monitor the charging process and disconnect the device once it reaches a full charge to avoid overcharging. Please refer to the device's user manual or contact the manufacturer for more specific information regarding the charging time for your mobile device using the Bosch GAL 1210 CV Professional charger.

What should I do if the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger?

If the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger, you can try the following steps to troubleshoot the issue: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the battery. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if it resumes properly. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Why is the charging indicator on the Bosch GAL 1210 CV Professional charger not turning on when I connect my mobile device?

If the charging indicator on the Bosch GAL 1210 CV Professional charger is not turning on when you connect your mobile device, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the mobile device. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 4. Check the battery status: Ensure that the battery of your mobile device has enough charge to initiate the charging process. If the battery is completely drained, the charging indicator may not turn on immediately. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if the indicator turns on. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Is the manual of the Bosch GAL 1210 CV Professional available in English?

Yes, the manual of the Bosch GAL 1210 CV Professional is available in English .

Is your question not listed? Ask your question here

No results