Bosch GAL 1210 CV Professional manual

Bosch GAL 1210 CV Professional
8.7 · 1
PDF manual
 · 60 pages
English
manualBosch GAL 1210 CV Professional
20 | Norsk
uppstår igen, låt ett auktoriserat servicecenter förBosch -
elverktyg kontrollera laddaren.

Lysdioderna lyser inte

Ingen indikering lyser, vilket betyder att batteriet inte
laddas.
Orsak: Fel på stickkontakten, nätkabeln eller laddaren
Åtgärd: Kontrollera nätspänningen.Låt vid behov en
auktoriserad serviceleverantör kontrollera laddaren.

Underhåll och service

Underhåll och rengöring

Om nätsladden för bibehållande av verktygets säkerhet måste
bytas ut, ska byte ske hos Bosch eller en auktoriserad
serviceverkstad för Bosch elverktyg.

Kundtjänst och applikationsrådgivning

Kundservicen ger svar på frågor beträffande reparation och
underhåll av produkter och reservdelar. Explosionsritningar
och informationer om reservdelar hittar du också under:
www.bosch-pt.com
Boschs applikationsrådgivnings-team hjälper dig gärna med
frågor om våra produkter och tillbehören till dem.
Ange alltid vid förfrågningar och reservdelsbeställningar det
10‑siffriga produktnumret som finns på produktens typskylt.
Svenska
Bosch Service Center
Telegrafvej 3
2750 Ballerup
Danmark
Tel.: (08) 7501820 (inom Sverige)
Fax: (011) 187691
Du hittar fler kontaktuppgifter till service här:
www.bosch-pt.com/serviceaddresses

Avfallshantering

Laddare, tillbehör och förpackning ska omhändertas på ett
miljövänligt sätt för återvinning.
Laddare får inte kastas i hushållsavfallet!
Endast för EU‑länder:
Enligt EU-direktivet 2012/19/EU om avfall som utgörs av eller
innehåller elektrisk och elektronisk utrustning och dess
tillämpning i nationell lag ska förbrukade laddare sorteras och
återvinnas separat.
Vid felaktig avfallshantering kan elektriska och elektroniska
apparater orsaka skador på hälsa och miljö på grund av
potentiellt farliga ämnen.

Norsk

Sikkerhetsanvisninger

Les sikkerhetsanvis-
ningene og instruksene.
Hvis ikke
sikkerhetsanvisningene og
instruksene tas til følge, kan
det oppstå elektrisk støt, brann og/eller alvorlige
personskader.
Ta godt vare på disse anvisningene.
Bruk laderen bare hvis du skjønner og kan bruke alle
funksjonene eller har fått nødvendige anvisninger.
u Denne laderen er ikke beregnet brukt av barn og
personer med reduserte fysiske eller sansemessige
evner eller med manglende erfaring og kunnskap. Denne
laderen kan brukes av barn fra åtte år og oppover og
personer med reduserte fysiske eller sansemessige
evner eller manglende erfaring og kunnskap hvis bruken
skjer under tilsyn av en person som er ansvarlig for
sikkerheten, eller vedkommende har fått opplæring i
sikker bruk av laderen av denne personen, og forstår
farene som er forbundet med bruken. Ellers er det fare for
feilbetjening og personskader.
u Hold tilsyn med barn under bruk, rengjøring og
vedlikehold. På den måten unngår du at barn leker med
laderen.
u Lad bare Bosch li-ion-batterier med en kapasitet fra
1,3Ah. Batterispenningen må stemme overens med
laderens batteriladespenning. Du må ikke lade batterier
som ikke er oppladbare. Annen bruk medfører fare for
brann og eksplosjon.
Bruk bare laderen i lukkede rom, og ikke utsett den
for fuktighet. Hvis vann trenger inn i en lader, medfører det
økt risiko for elektrisk støt.
u Sørg for at lederen alltid er ren. Skitt medfører fare for
elektrisk støt.
u Inspiser alltid laderen, ledningen og støpselet før bruk.
Ikke bruk laderen hvis du oppdager skader. Du må ikke
åpne laderen selv. Reparasjoner må kun utføres av
Bosch eller autoriserte serviceverksteder og kun med
originale reservedeler. Skadde ladere, ledninger og
støpsler øker risikoen for elektrisk støt.
u Bruk ikke laderen på lett antennelig underlag (f.eks.
papir, tekstiler osv.) eller i antennelige omgivelser.
Oppvarmingen av laderen under drift medfører brannfare.
u Laderens ventilasjonsåpning må ikke tildekkes. Det kan
føre til at laderen overopphetes og ikke lenger vil fungere
som den skal.
u Lad batteriet bare med laderen som er angitt av
produsenten. Det oppstår brannfare hvis en lader som er
1 609 92A 80F | (13.01.2023) Bosch Power Tools

View the manual for the Bosch GAL 1210 CV Professional here, for free. This manual comes under the category chargers for mobile devices and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Bosch GAL 1210 CV Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelGAL 1210 CV Professional
Productcharger for mobile device
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GAL 1210 CV Professional below.

How do I know if the Bosch GAL 1210 CV Professional charger is compatible with my mobile device?

To determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device, follow these steps: 1. Check the battery type: The Bosch GAL 1210 CV charger is designed specifically for charging rechargeable Bosch Li-Ion batteries. Ensure that your mobile device uses a compatible Li-Ion battery. 2. Verify the battery capacity: The charger is suitable for charging Bosch Li-Ion batteries with a capacity of 1.3 Ah or more. Make sure your mobile device battery meets this requirement. 3. Match the battery voltage: The voltage of the battery must match the battery charging voltage of the charger. Check the specifications of your mobile device battery and ensure it matches the charging voltage supported by the Bosch GAL 1210 CV charger. 4. Avoid charging non-rechargeable batteries: It is important to note that the Bosch GAL 1210 CV charger is only intended for charging rechargeable batteries. Do not attempt to charge non-rechargeable batteries with this charger. By following these steps, you can determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device.

Why is my mobile device not charging when connected to the Bosch GAL 1210 CV Professional charger?

There could be several reasons why your mobile device is not charging when connected to the Bosch GAL 1210 CV Professional charger. Here are some possible causes and solutions: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Check the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Verify compatibility: Make sure that your mobile device is compatible with the Bosch GAL 1210 CV charger. Refer to the device's user manual or specifications to confirm compatibility. 5. Check for firmware updates: Some mobile devices require firmware updates to work with certain chargers. Check if there are any available updates for your device and install them if necessary. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

How long does it take to fully charge a mobile device using the Bosch GAL 1210 CV Professional charger?

The Bosch GAL 1210 CV Professional charger is designed to charge Bosch Li-Ion batteries. The charging time for a mobile device connected to the charger depends on several factors, including the battery capacity and the current charging level of the battery. To estimate the charging time, follow these steps: 1. Check the battery capacity: Determine the capacity of your mobile device battery. This information is usually available in the device's specifications or user manual. 2. Calculate the charging time: The charging time can vary depending on the battery capacity and the charging current. As a general guideline, you can estimate the charging time by dividing the battery capacity by the charging current. For example, if your mobile device battery has a capacity of 2000mAh and the charger provides a charging current of 1000mA (1A), the estimated charging time would be approximately 2 hours. It's important to note that the actual charging time may vary depending on the battery condition, temperature, and other factors. It's recommended to monitor the charging process and disconnect the device once it reaches a full charge to avoid overcharging. Please refer to the device's user manual or contact the manufacturer for more specific information regarding the charging time for your mobile device using the Bosch GAL 1210 CV Professional charger.

What should I do if the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger?

If the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger, you can try the following steps to troubleshoot the issue: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the battery. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if it resumes properly. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Why is the charging indicator on the Bosch GAL 1210 CV Professional charger not turning on when I connect my mobile device?

If the charging indicator on the Bosch GAL 1210 CV Professional charger is not turning on when you connect your mobile device, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the mobile device. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 4. Check the battery status: Ensure that the battery of your mobile device has enough charge to initiate the charging process. If the battery is completely drained, the charging indicator may not turn on immediately. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if the indicator turns on. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Is the manual of the Bosch GAL 1210 CV Professional available in English?

Yes, the manual of the Bosch GAL 1210 CV Professional is available in English .

Is your question not listed? Ask your question here

No results