Bosch GAL 1210 CV Professional manual

Bosch GAL 1210 CV Professional
8.7 · 1
PDF manual
 · 60 pages
English
manualBosch GAL 1210 CV Professional
16 | Nederlands
u Dit oplaadapparaat is niet bestemd voor gebruik door
kinderen en personen met beperkte lichamelijke, zin-
tuiglijke of geestelijke capaciteiten of gebrek aan erva-
ring en kennis. Dit oplaadapparaat kan door kinderen
vanaf 8 jaar evenals door personen met beperkte licha-
melijke, zintuiglijke of geestelijke capaciteiten of gebrek
aan ervaring en kennis gebruikt worden, mits zij onder
toezicht staan van een persoon die voor hun veiligheid
verantwoordelijk is, of door deze in het veilige gebruik
van het oplaadapparaat geïnstrueerd werden en zij de
hiermee verbonden gevaren begrijpen. Anders bestaat er
gevaar voor foute bediening en verwondingen.
u Houd toezicht op kinderen bij gebruik, reiniging en on-
derhoud. Op deze manier wordt gewaarborgd dat kinderen
niet met het oplaadapparaat spelen.
u Laad alleenBosch Li-Ion-accu's vanaf een capaciteit
van1,3Ah. De accuspanning moet bij de acculaadspan-
ning van het oplaadapparaat passen. Laad geen accu's
die niet oplaadbaar zijn. Anders bestaat er brand- en ex-
plosiegevaar.
Gebruik het oplaadapparaat alleen in gesloten ruim-
ten en zorg dat het niet nat kan worden. Het binnendringen
van water in een oplaadapparaat verhoogt het risico van een
elektrische schok.
u Houd het oplaadapparaat schoon. Door vervuiling bestaat
er gevaar voor een elektrische schok.
u Controleer vóór elk gebruik oplaadapparaat incl. kabel
en stekker. Gebruik het oplaadapparaat niet, als u be-
schadigingen vaststelt. Open het oplaadapparaat niet
zelf en laat het uitsluitend repareren door Bosch of door
geautoriseerde klantenservicecentra en alleen met origi-
nele vervangingsonderdelen. Beschadigde oplaadappara-
ten, kabels en stekkers verhogen het risico van een elektri-
sche schok.
u Gebruik het oplaadapparaat niet op een licht ontvlamba-
re ondergrond (bijv. papier, textiel enz.) of in een brand-
bare omgeving. Vanwege de bij het opladen optredende
verwarming van het oplaadapparaat bestaat brandgevaar.
u Dek de ventilatiesleuven van het oplaadapparaat niet af.
Het oplaadapparaat kan anders oververhit raken en niet
meer correct functioneren.
u Laad accu’s alleen op in oplaadapparaten die door de fa-
brikant worden geadviseerd. Voor een oplaadapparaat
dat voor een bepaald type accu geschikt is, bestaat brandge-
vaar wanneer het met andere accu’s wordt gebruikt.
u Bij beschadiging en verkeerd gebruik van de accu kun-
nen er ook dampen vrijkomen. Zorg voor frisse lucht en
raadpleeg bij klachten een arts. De dampen kunnen de lucht-
wegen irriteren.
u Bij verkeerd gebruik kan vloeistof uit de accu lekken.
Voorkom contact daarmee. Spoel bij onvoorzien contact
met water af. Wanneer de vloeistof in de ogen komt,
dient u bovendien een arts te raadplegen. Gelekte accu-
vloeistof kan tot huidirritaties en verbrandingen leiden.

Beschrijving van product en werking

Beoogd gebruik

Het oplaadapparaat is bedoeld voor het opladen van oplaadba-
re Li-ion-accu's van Bosch.

Afgebeelde componenten

De componenten zijn genummerd zoals op de afbeeldingen van
het oplaadapparaat op de pagina’s met afbeeldingen.
(1)
Laadschacht
(2)
Groene oplaadaanduiding

Technische gegevens

Oplaadapparaat GAL 1210 CV
Isolatieklasse
/ II
Laadstroom
A)
1,0A
Oplaadspanning accu (automatische
spanningsherkenning)
12V
A) afhankelijk van temperatuur en accutype

Oplaadproces

u Let op de netspanning! De spanning van de stroombron
moet overeenkomen met de gegevens op het typeplaatje
van het oplaadapparaat.
Het oplaadproces begint zodra de netstekker van het oplaadap-
paraat in het stopcontact gestoken en de accu in de laad-
schacht (1) gestoken wordt.
Het oplaadproces is alleen mogelijk wanneer de tempe-
ratuur van de accu zich binnen het toegestane oplaad-
temperatuurbereik bevindt (0–45°C).
Raadpleeg voor aanvullende informatie de online-
gebruiksaanwijzing: www.bosch-pt.com/manuals

Verhelpen van fouten

Accu wordt niet opgeladen

De accu wordt niet opgeladen en de oplaadaanduiding(2)
brandt continu.
Oorzaak: Oplaadapparaat heeft een interne fout vastgesteld
Verhelpen: Zorg ervoor dat alle accu's volledig ingestoken zijn.
Trek de netstekker uit het stopcontact en steek deze weer in
het stopcontact. Als de fout opnieuw optreedt, laat het oplaad-
apparaat dan controleren door een geautoriseerde klanten-
dienst voor elektrische gereedschappen vanBosch.

Aanduidingen branden niet

Er brandt geen aanduiding, accu wordt niet opgeladen.
Oorzaak: Stopcontact, netsnoer of oplaadapparaat defect
1 609 92A 80F | (13.01.2023) Bosch Power Tools

View the manual for the Bosch GAL 1210 CV Professional here, for free. This manual comes under the category chargers for mobile devices and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Bosch GAL 1210 CV Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelGAL 1210 CV Professional
Productcharger for mobile device
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GAL 1210 CV Professional below.

How do I know if the Bosch GAL 1210 CV Professional charger is compatible with my mobile device?

To determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device, follow these steps: 1. Check the battery type: The Bosch GAL 1210 CV charger is designed specifically for charging rechargeable Bosch Li-Ion batteries. Ensure that your mobile device uses a compatible Li-Ion battery. 2. Verify the battery capacity: The charger is suitable for charging Bosch Li-Ion batteries with a capacity of 1.3 Ah or more. Make sure your mobile device battery meets this requirement. 3. Match the battery voltage: The voltage of the battery must match the battery charging voltage of the charger. Check the specifications of your mobile device battery and ensure it matches the charging voltage supported by the Bosch GAL 1210 CV charger. 4. Avoid charging non-rechargeable batteries: It is important to note that the Bosch GAL 1210 CV charger is only intended for charging rechargeable batteries. Do not attempt to charge non-rechargeable batteries with this charger. By following these steps, you can determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device.

Why is my mobile device not charging when connected to the Bosch GAL 1210 CV Professional charger?

There could be several reasons why your mobile device is not charging when connected to the Bosch GAL 1210 CV Professional charger. Here are some possible causes and solutions: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Check the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Verify compatibility: Make sure that your mobile device is compatible with the Bosch GAL 1210 CV charger. Refer to the device's user manual or specifications to confirm compatibility. 5. Check for firmware updates: Some mobile devices require firmware updates to work with certain chargers. Check if there are any available updates for your device and install them if necessary. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

How long does it take to fully charge a mobile device using the Bosch GAL 1210 CV Professional charger?

The Bosch GAL 1210 CV Professional charger is designed to charge Bosch Li-Ion batteries. The charging time for a mobile device connected to the charger depends on several factors, including the battery capacity and the current charging level of the battery. To estimate the charging time, follow these steps: 1. Check the battery capacity: Determine the capacity of your mobile device battery. This information is usually available in the device's specifications or user manual. 2. Calculate the charging time: The charging time can vary depending on the battery capacity and the charging current. As a general guideline, you can estimate the charging time by dividing the battery capacity by the charging current. For example, if your mobile device battery has a capacity of 2000mAh and the charger provides a charging current of 1000mA (1A), the estimated charging time would be approximately 2 hours. It's important to note that the actual charging time may vary depending on the battery condition, temperature, and other factors. It's recommended to monitor the charging process and disconnect the device once it reaches a full charge to avoid overcharging. Please refer to the device's user manual or contact the manufacturer for more specific information regarding the charging time for your mobile device using the Bosch GAL 1210 CV Professional charger.

What should I do if the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger?

If the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger, you can try the following steps to troubleshoot the issue: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the battery. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if it resumes properly. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Why is the charging indicator on the Bosch GAL 1210 CV Professional charger not turning on when I connect my mobile device?

If the charging indicator on the Bosch GAL 1210 CV Professional charger is not turning on when you connect your mobile device, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the mobile device. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 4. Check the battery status: Ensure that the battery of your mobile device has enough charge to initiate the charging process. If the battery is completely drained, the charging indicator may not turn on immediately. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if the indicator turns on. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Is the manual of the Bosch GAL 1210 CV Professional available in English?

Yes, the manual of the Bosch GAL 1210 CV Professional is available in English .

Is your question not listed? Ask your question here

No results