Bosch GAL 1210 CV Professional manual

Bosch GAL 1210 CV Professional
8.7 · 1
PDF manual
 · 60 pages
English
manualBosch GAL 1210 CV Professional
Nederlands | 15

Dati tecnici

Stazione di ricarica GAL 1210 CV
Classe di protezione
/ II
Corrente di carica
A)
1,0A
Tensione di carica della batteria (rileva-
mento automatico della tensione)
12V
A) in funzione della temperatura e del tipo di batteria

Procedura di ricarica

u Osservare la tensione di rete! La tensione della rete elettri-
ca di alimentazione deve corrispondere ai dati riportati sulla
targhetta di identificazione della stazione di ricarica.
La procedura di ricarica inizia non appena la spina di alimenta-
zione del caricabatteria viene inserita nella presa di corrente e
la batteria viene inserita nella sede di ricarica (1).
La procedura di ricarica è possibile solo se la temperatu-
ra della batteria si trova nell’intervallo della temperatura
di ricarica ammesso (0–45°C).
Per ulteriori informazioni, visitare il manuale
d'istruzioni online: www.bosch-pt.com/manuals

Eliminazione degli errori

Batteria non in fase di ricarica

La batteria non viene caricata e l’indicatore del livello di
carica(2) è acceso con luce fissa.
Causa: il caricabatteria ha rilevato un errore interno
Soluzione: accertarsi che tutte le batterie siano completamen-
te inserite. Estrarre e inserire nuovamente la spina di alimenta-
zione. Qualora l’errore si ripresentasse, far controllare il carica-
batteria da un centro assistenza autorizzato per
elettroutensiliBosch.

Gli indicatori non si accendono

Non si illumina alcun indicatore, la batteria non viene
ricaricata.
Causa: difetto nella presa di corrente, nel cavo di alimentazio-
ne o nel caricabatteria
Soluzione: controllare la tensione di rete. All’occorrenza, far
controllare il caricabatteria da un Centro Assistenza Clienti au-
torizzato.

Manutenzione ed assistenza

Manutenzione e pulizia

Se fosse necessaria una sostituzione della linea di collegamen-
to, questa dovrà essere eseguita da Bosch oppure da un centro
assistenza clienti autorizzato per elettroutensili Bosch, al fine
di evitare pericoli per la sicurezza.

Servizio di assistenza e consulenza tecnica

Il servizio di assistenza risponde alle Vostre domande relative
alla riparazione e alla manutenzione del Vostro prodotto non-
ché concernenti i pezzi di ricambio. Disegni in vista esplosa e
informazioni relative ai pezzi di ricambio sono consultabili an-
che sul sito www.bosch-pt.com
Il team di consulenza tecnica Bosch sarà lieto di rispondere alle
Vostre domande in merito ai nostri prodotti e accessori.
In caso di richieste o di ordinazione di pezzi di ricambio, comu-
nicare sempre il codice prodotto a 10cifre riportato sulla tar-
ghetta di fabbricazione dell’elettroutensile.
Italia
Tel.: (02) 3696 2314
E-Mail: pt.hotlinebosch@it.bosch.com
Per ulteriori indirizzi del servizio assistenza consultare:
www.bosch-pt.com/serviceaddresses

Smaltimento

Avviare ad un riciclaggio rispettoso dell’ambiente la stazione di
ricarica, gli accessori dismessi e gli imballaggi.
Non gettare i caricabatteria tra i rifiuti domestici!
Solo per i Paesi dellaCE:
In conformità alla Direttiva Europea 2012/19/UE sui rifiuti di
apparecchiature elettriche ed elettroniche (RAEE) ed all’attua-
zione del recepimento nel diritto nazionale, i caricabatteria di-
venuti inservibili devono essere raccolti separatamente ed es-
sere smaltiti/riciclati nel rispetto dell’ambiente.
In caso di smaltimento improprio, le apparecchiature elettriche
ed elettroniche potrebbero avere effetti nocivi sull'ambiente e
sulla salute umana a causa della possibile presenza di sostanze
nocive.

Nederlands

Veiligheidsaanwijzingen

Lees alle veiligheidsaanwij-
zingen en instructies. Het
niet naleven van de veilig-
heidsaanwijzingen en in-
structies kan elektrische
schokken, brand en/of zware verwondingen veroorzaken.
Bewaar deze instructies goed.
Gebruik het oplaadapparaat alleen wanneer u alle functies vol-
ledig kunt inschatten en zonder beperkingen kunt gebruiken of
daarvoor bestemde instructies heeft ontvangen.
Bosch Power Tools 1 609 92A 80F | (13.01.2023)

View the manual for the Bosch GAL 1210 CV Professional here, for free. This manual comes under the category chargers for mobile devices and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Bosch GAL 1210 CV Professional or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelGAL 1210 CV Professional
Productcharger for mobile device
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch GAL 1210 CV Professional below.

How do I know if the Bosch GAL 1210 CV Professional charger is compatible with my mobile device?

To determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device, follow these steps: 1. Check the battery type: The Bosch GAL 1210 CV charger is designed specifically for charging rechargeable Bosch Li-Ion batteries. Ensure that your mobile device uses a compatible Li-Ion battery. 2. Verify the battery capacity: The charger is suitable for charging Bosch Li-Ion batteries with a capacity of 1.3 Ah or more. Make sure your mobile device battery meets this requirement. 3. Match the battery voltage: The voltage of the battery must match the battery charging voltage of the charger. Check the specifications of your mobile device battery and ensure it matches the charging voltage supported by the Bosch GAL 1210 CV charger. 4. Avoid charging non-rechargeable batteries: It is important to note that the Bosch GAL 1210 CV charger is only intended for charging rechargeable batteries. Do not attempt to charge non-rechargeable batteries with this charger. By following these steps, you can determine if the Bosch GAL 1210 CV Professional charger is compatible with your mobile device.

Why is my mobile device not charging when connected to the Bosch GAL 1210 CV Professional charger?

There could be several reasons why your mobile device is not charging when connected to the Bosch GAL 1210 CV Professional charger. Here are some possible causes and solutions: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Check the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Verify compatibility: Make sure that your mobile device is compatible with the Bosch GAL 1210 CV charger. Refer to the device's user manual or specifications to confirm compatibility. 5. Check for firmware updates: Some mobile devices require firmware updates to work with certain chargers. Check if there are any available updates for your device and install them if necessary. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

How long does it take to fully charge a mobile device using the Bosch GAL 1210 CV Professional charger?

The Bosch GAL 1210 CV Professional charger is designed to charge Bosch Li-Ion batteries. The charging time for a mobile device connected to the charger depends on several factors, including the battery capacity and the current charging level of the battery. To estimate the charging time, follow these steps: 1. Check the battery capacity: Determine the capacity of your mobile device battery. This information is usually available in the device's specifications or user manual. 2. Calculate the charging time: The charging time can vary depending on the battery capacity and the charging current. As a general guideline, you can estimate the charging time by dividing the battery capacity by the charging current. For example, if your mobile device battery has a capacity of 2000mAh and the charger provides a charging current of 1000mA (1A), the estimated charging time would be approximately 2 hours. It's important to note that the actual charging time may vary depending on the battery condition, temperature, and other factors. It's recommended to monitor the charging process and disconnect the device once it reaches a full charge to avoid overcharging. Please refer to the device's user manual or contact the manufacturer for more specific information regarding the charging time for your mobile device using the Bosch GAL 1210 CV Professional charger.

What should I do if the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger?

If the charging process stops unexpectedly while using the Bosch GAL 1210 CV Professional charger, you can try the following steps to troubleshoot the issue: 1. Check the battery connection: Ensure that the battery is properly inserted into the charger. Make sure it is securely connected and not loose. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 4. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the battery. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if it resumes properly. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Why is the charging indicator on the Bosch GAL 1210 CV Professional charger not turning on when I connect my mobile device?

If the charging indicator on the Bosch GAL 1210 CV Professional charger is not turning on when you connect your mobile device, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the charger is plugged into a working power outlet. Try plugging it into a different outlet to rule out any issues with the power source. 2. Verify the charging cable: Inspect the charging cable for any damage or frayed wires. If the cable is damaged, it may not provide a proper connection. Try using a different charging cable to see if that resolves the issue. 3. Clean the charging contacts: Over time, dust or debris may accumulate on the charging contacts of the charger or the mobile device. Use a clean, dry cloth to gently wipe the contacts and remove any dirt or residue. 4. Check the battery status: Ensure that the battery of your mobile device has enough charge to initiate the charging process. If the battery is completely drained, the charging indicator may not turn on immediately. 5. Restart the charging process: Disconnect the mobile device from the charger and reconnect it. Restart the charging process to see if the indicator turns on. If the issue persists after trying these steps, it is recommended to contact the manufacturer or seek assistance from a professional technician for further troubleshooting.

Is the manual of the Bosch GAL 1210 CV Professional available in English?

Yes, the manual of the Bosch GAL 1210 CV Professional is available in English .

Is your question not listed? Ask your question here

No results