View the manual for the Bosch Fontus 18V here, for free. This manual comes under the category batteries and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Bosch Fontus 18V or do you need help? Ask your question here



| Brand | Bosch |
| Model | Fontus 18V | 0 600 8B6 101 |
| Product | battery |
| EAN | 4059952547909 |
| Language | English |
| Filetype | User manual (PDF) |
| Device type | Universal |
| Substance | Pump spray |
| Form factor | Upright |
| Power source | Battery |
| Pressure range | High-pressure |
| Hose length | 4 m |
| Detergent tank | - |
| Tank capacity | 15 L |
| Working pressure (max) | 20 bar |
| Vibration emission | 0.4 m/s² |
| Uncertainty K | 0.5 m/s² |
| Maximum flow rate | - l/h |
| Weight | 7500 g |
| Depth | 320 mm |
| Width | 395 mm |
| Height | 645 mm |
| Power consumption (typical) | - W |
| Number of batteries supported | 1 |
| Battery recharge time | 2.5 h |
| Battery capacity | 2.5 Ah |
| Car wash brush | - |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Fontus 18V below.
The Bosch Fontus 18V has a weight of 7500 g.
The Bosch Fontus 18V has a height of 645 mm.
It takes 2.5 h to charge the battery of the Bosch Fontus 18V.
The Bosch Fontus 18V has a width of 395 mm.
The Bosch Fontus 18V has a depth of 320 mm.
Yes, the Bosch Fontus 18V is a pump spray device, making it suitable for various outdoor cleaning tasks.
The Bosch Fontus 18V has a max working pressure of 20 bar, providing strong and effective cleaning power.
The Bosch Fontus 18V supports 1 battery, ensuring continuous usage without the need for frequent recharging.
The Bosch Fontus 18V has a battery capacity of 2.5 Ah, offering enough power for extended cleaning sessions.
The tank capacity of the Bosch Fontus 18V is 15 L, allowing for longer cleaning sessions without the need for frequent refills.
To clean and maintain the Bosch Fontus 18V battery, follow these steps: 1. Switch off the unit: Before performing any cleaning or maintenance work, make sure to switch off the Fontus 18V battery. 2. Clean the battery contacts: If the battery contacts are contaminated, clean them by inserting and removing the battery several times. This will help ensure proper contact and functioning. 3. Store the machine and battery properly: When not in use, store the Fontus 18V battery and the machine separately within a temperature range of -20°C to 50°C. Avoid leaving the battery in direct sunlight or in a car during hot summer days. 4. Clean the venting slots: Occasionally, use a soft, clean, and dry brush to clean the venting slots of the battery. This will help maintain proper ventilation and prevent any issues. 5. Replace the battery if needed: If you notice a significantly reduced working period after charging, it indicates that the battery is used and may need to be replaced. Consider getting a new battery for optimal performance. By following these steps, you can ensure the proper cleaning and maintenance of your Bosch Fontus 18V battery.
If the Bosch Fontus 18V battery does not switch off, you can try the following steps to resolve the issue: 1. Check the battery insertion: Ensure that the battery is properly inserted into the Fontus 18V battery unit. If it is not inserted correctly, remove the battery and reinsert it securely. 2. Clean the battery contacts: Contaminated battery contacts can interfere with the proper functioning of the battery. Clean the battery contacts by gently inserting and removing the battery several times. This can help establish a better connection. 3. Replace the battery: If the battery is old or defective, it may not switch off properly. Consider replacing the battery with a new one to ensure optimal performance. 4. Contact authorized service centers: If the issue persists after trying the above steps, it is recommended to contact authorized Bosch Service Centers for further assistance. They have the expertise to diagnose and resolve any technical issues with the Fontus 18V battery. By following these steps, you can troubleshoot the issue of the Bosch Fontus 18V battery not switching off.
To adjust the pressure mode and spray pattern for different cleaning tasks with the Bosch Fontus 18V battery, follow these steps: 1. Connect the hose: Attach the hose to the water outlet and the spray gun. 2. Select the spray pattern: Rotate the nozzle head to choose the desired spray pattern. The nozzle head is numbered for reference. 3. Adjust the pressure: Use the pressure selector to set the desired jet strength. This allows you to control the pressure of the water spray. 4. Switch on the unit: Press the On/Off switch and pull and hold the trigger until water comes out. It may take up to 10 seconds for water to flow initially. 5. Use the brush (optional): If needed, mount the brush onto the spray gun for more effective cleaning. Slide the brush onto the spray gun and secure it by guiding the clips into the corresponding openings. To remove the brush, press the bottom clip upward and pull it off the spray gun. By following these steps, you can adjust the pressure mode and spray pattern of the Bosch Fontus 18V battery to suit different cleaning tasks.
The technical specifications of the Bosch Fontus 18V battery are as follows: - Rated voltage: 18V - Rated power: 170W - Protection class: III, IP X4 - Max pressure (system): 4.0 MPa (+/- 0.4) - Rated pressure (user output): 2.0 MPa (+/- 0.2) - Max water temperature: 50°C - Weight: 7.5 kg (according to EPTA-Procedure 01:2014) - Permitted ambient temperature: - During charging: 0°C to +45°C - During operation: +5°C to +50°C - During storage: -20°C to +50°C - Battery type: PBA 18V...W-. (1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0 Ah, 5.0 Ah, 6.0 Ah) - Charger: AL 1810 CV, AL 1820 CV, AL 1830 CV - Charging current: 1.0 A, 2.0 A, 3.0 A - Charging period (battery discharged, 80% / 100%): - Battery with 1.5 Ah: min (72) / 94 min - Battery with 2.0 Ah: min (96) / 124 min - Battery with 2.5 Ah: min (120) / 154 min - Battery with 3.0 Ah: min (144) / 184 min - Battery with 4.0 Ah: min (192) / 244 min - Battery with 5.0 Ah: min (240) / 304 min - Battery with 6.0 Ah: min (288) / 364 min - Protection class: II - Noise emission values: Sound pressure level 67 dB(A), sound power level 78 dB(A) - Overall vibrational values: ah = 0.4 m/s², K = 0.5 m/s² These specifications apply to a rated voltage of 230V. Please note that the specifications may vary for different voltages and country-specific models.
To fill the water tank and connect the hose to the Bosch Fontus 18V battery, follow these steps: 1. Open the water tank: Locate the water tank on the Fontus 18V battery unit and remove the cap or lid to access the tank. 2. Fill the water tank: Using a suitable container or hose, fill the water tank with clean water. Ensure that the water level does not exceed the maximum fill line indicated on the tank. 3. Close the water tank: Once the water tank is filled, securely close the cap or lid to prevent any water leakage during operation. 4. Connect the hose: Attach one end of the hose to the water outlet on the Fontus 18V battery unit. Ensure a tight connection to avoid any water leakage. 5. Connect the other end of the hose: Attach the other end of the hose to the spray gun. Again, ensure a secure connection to prevent water leakage. By following these steps, you can easily fill the water tank and connect the hose to the Bosch Fontus 18V battery for your cleaning tasks.
Yes, the manual of the Bosch Fontus 18V is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1How often do you have to clean the water filter where the water goes in and how do you remove it