View the manual for the Bosch Flexxo 2in1 Zoo BBH3ZOO25 here, for free. This manual comes under the category vacuum cleaners and has been rated by 4 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Bosch Flexxo 2in1 Zoo BBH3ZOO25 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Bosch Flexxo 2in1 Zoo BBH3ZOO25.
| Brand | Bosch |
| Model | Flexxo 2in1 Zoo BBH3ZOO25 |
| Product | vacuum cleaner |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch Flexxo 2in1 Zoo BBH3ZOO25 below.
Your Bosch vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
To troubleshoot if the accessories are not fitting properly on the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner, follow these steps: 1. Check if the accessory holder is securely closed. Open the accessory holder using the recessed grip and make sure it is fully closed before attaching the accessories. 2. Ensure that you are using the correct accessory for the desired task. The Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner comes with different accessories such as the crevice nozzle and combination nozzle. Make sure you are using the appropriate accessory for the specific cleaning job. 3. Align the accessory properly with the air intake opening of the cordless handheld vacuum cleaner. Place the accessory on the opening and ensure it clicks into place securely. 4. If the accessory is extendable, press the unlock button and adjust it to the desired length. Engage it in the end position to ensure proper functionality. 5. After use, push the accessory back together (if applicable) and place it in the accessory holder. Close the holder securely. By following these steps, you should be able to troubleshoot and ensure that the accessories fit properly on the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner.
To troubleshoot if the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner is not charging when connected to the charging cable, follow these steps: 1. Ensure that you are using the provided charging cable that came with the vacuum cleaner. Using a different cable may not provide the correct charging voltage. 2. Check if the charging cable is securely connected to both the vacuum cleaner and the power socket. Make sure the connections are tight and there are no loose connections. 3. Verify that the power socket is working properly by plugging in another device. If the socket is not providing power, try using a different socket. 4. Check if the charging indicator on the vacuum cleaner is flashing slowly in white when connected to the charging cable. If the indicator is not lit or not flashing, there may be an issue with the charging cable or the vacuum cleaner's charging circuit. 5. If none of the above steps resolve the issue, try resetting the vacuum cleaner by disconnecting it from the charging cable and removing the battery. Wait for a few minutes, then reinsert the battery and reconnect the charging cable. By following these steps, you should be able to troubleshoot and resolve the issue of the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner not charging when connected to the charging cable.
To troubleshoot if the hand stick vacuum cleaner of the Bosch Flexxo 2in1 Zoo BBH3ZOO25 is not turning on or not providing suction, follow these steps: 1. Check if the vacuum cleaner is properly connected to the hand stick. Ensure that it is securely locked into place. 2. Verify that the battery is charged. Connect the vacuum cleaner to the charging cable and make sure it is charging. If the battery is low, allow it to charge fully before using the vacuum cleaner. 3. Check if the power switch is in the "on" position. Ensure that the switch is in the correct position to activate the vacuum cleaner. 4. Clean the filters. Remove the filter unit from the dust container and tap it lightly to remove any dust or debris. If necessary, clean the filter cartridge by tapping out the dirt and rinsing the foam filter separately. Allow the filters to dry completely before reinserting them. 5. Inspect the floor nozzle for any blockages or obstructions. Remove the brush roller and clean it, removing any threads or hair wound around it. Ensure that the floor nozzle is free from any debris that may be affecting the suction. By following these steps, you should be able to troubleshoot and resolve the issue of the hand stick vacuum cleaner not turning on or not providing suction.
To address the issue of the dust container not emptying properly or being difficult to remove on the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner, follow these steps: 1. Ensure that the vacuum cleaner is turned off and disconnected from the power source before attempting to remove the dust container. 2. Check if the dust container is full. If it is full, empty it by pressing the release button or lever to open the container. Dispose of the collected dust and debris in a suitable waste bin. 3. Inspect the dust container for any blockages or obstructions. Remove any debris or dirt that may be preventing the container from emptying properly. 4. Verify that the dust container is properly aligned and seated in its position. Ensure that it is securely locked into place before attempting to remove it. 5. If the dust container is still difficult to remove, try applying gentle pressure or wiggling it slightly while pressing the release button or lever. Be careful not to use excessive force to avoid damaging the vacuum cleaner. By following these steps, you should be able to address the issue of the dust container not emptying properly or being difficult to remove on the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner.
To troubleshoot if the suction level is not changing when you slide the switch on the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner, follow these steps: 1. Check if the vacuum cleaner is turned on and connected to the power source. Ensure that the power switch is in the "on" position. 2. Verify that the battery is charged. Connect the vacuum cleaner to the charging cable and make sure it is charging. If the battery is low, allow it to charge fully before using the vacuum cleaner. 3. Inspect the suction control switch for any obstructions or debris. Clean the switch area and ensure that it moves freely without any hindrance. 4. Check if the dust container is full. If the dust container is full, empty it to ensure optimal suction performance. 5. If the above steps do not resolve the issue, remove the filter unit from the dust container and clean the filters. Tap the filter unit lightly to remove any dust or debris, and rinse the foam filter separately if necessary. Allow the filters to dry completely before reinserting them. By following these steps, you should be able to troubleshoot and resolve the issue of the suction level not changing when you slide the switch on the Bosch Flexxo 2in1 Zoo BBH3ZOO25 vacuum cleaner.
Yes, the manual of the Bosch Flexxo 2in1 Zoo BBH3ZOO25 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0