View the manual for the Bosch EasyPrune here, for free. This manual comes under the category hedge trimmers and has been rated by 8 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Bosch EasyPrune or do you need help? Ask your question here



The Bosch EasyPrune is a hedge trimmer designed to provide an efficient cutting experience. With a battery voltage of 3.6 V, it offers a reliable power source for trimming tasks. The trimmer is equipped with a bypass cutting system, ensuring clean and precise cuts. Its cutting capacity allows for branches with a maximum thickness of 25 mm to be trimmed effortlessly. With 450 cuts per battery charge, the Bosch EasyPrune offers a decent level of battery life, allowing for extended trimming sessions before recharging is needed. The charging time required for a full recharge is approximately 3.5 hours, providing users with a reasonable turnaround time between uses. Weighing 490 grams, this hedge trimmer is lightweight and easy to handle, reducing fatigue during long trimming sessions. Its ergonomic design and balanced weight distribution contribute to a comfortable experience for users. The Bosch EasyPrune is constructed with durability and longevity in mind. The use of premium materials ensures that it withstands regular use and maintains its performance over time. Its custom-fit design allows for efficient operation and ensures optimal performance for each individual car model. In conclusion, the Bosch EasyPrune hedge trimmer combines reliable power, precise cutting, and durability. With its lightweight design and comfortable handling, it offers a user-friendly experience. Whether tackling small or medium-sized hedges, this trimmer provides a versatile and efficient solution.

| Brand | Bosch |
| Model | EasyPrune | 0 600 8B2 001 |
| Product | hedge trimmer |
| Language | English |
| Filetype | User manual (PDF) |
| Battery voltage | 3.6 V |
| Battery technology | Lithium-Ion (Li-Ion) |
| Cuts per battery charge | 450 |
| Charging time | 3.5 h |
| Cutting system | Bypass |
| Product color | Black, Green |
| Maximum branch thickness | 25 mm |
| Weight | 490 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch EasyPrune below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.
The Bosch EasyPrune has a weight of 490 g.
Make sure the trimmer is turned off and disconnected from the power source. Locate the instruction manual for step-by-step guidance on how to correctly attach the blade to your Bosch EasyPrune hedge trimmer.
To ensure optimal performance, it's crucial to know the correct battery charging time for your Bosch EasyPrune hedge trimmer. Consult the user manual for precise information on the recommended charging duration to properly maintain your battery.
In order to achieve the desired cutting length, familiarize yourself with the instructions provided in the user manual of the Bosch EasyPrune hedge trimmer for step-by-step guidance on adjusting the cutting length.
Maintenance plays a significant role in the longevity and smooth operation of your Bosch EasyPrune hedge trimmer blades. Refer to the user manual for detailed instructions on how to clean and maintain the blades to prevent any potential issues and ensure durability.
If you're experiencing difficulties starting your Bosch EasyPrune hedge trimmer, consult the user manual for troubleshooting tips and step-by-step instructions. It will guide you through a systematic approach to identify and resolve common starting issues.
The battery voltage of the Bosch EasyPrune is 3.6 V.
The Bosch EasyPrune can make 450 cuts per battery charge.
The cutting system of the Bosch EasyPrune is bypass.
It takes 3.5 hours to fully charge the Bosch EasyPrune.
The Bosch EasyPrune can handle branches with a maximum thickness of 25 mm.
Yes, the manual of the Bosch EasyPrune is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 31Hi, my Bosch Easy prune are fully charged but won’t open. They seem locked. I’ve slid the small release button forward but still nothing happens. Please help
1 comment
To unlock the Bosch EasyPrune, follow these steps: 1. Deactivate the safety lock by pushing it back. 2. The tool will open and is now ready for use. If the tool is still not opening after sliding the small release button forward, please ensure that you have fully charged the battery. The battery charge-control indicator should light up green continuously when the battery is fully charged. If the indicator is not showing a continuous green light, please charge the tool until the indicator remains green. Please note that these instructions are general and may vary slightly depending on the specific model of the Bosch EasyPrune.
This answer is automatically generatedHello. I have the above-mentioned hedge trimmer and now have a problem. I was able to use it normally and during a cut, it suddenly wouldn't close all the way. I cannot see any external damage. In the attachment, I am sending you a picture of it. Now you can squeeze the shears together by hand, but when cutting, it goes back to the defective state so that you cannot cut any more branches/twigs. What can be done? The electronics are fine and it was only used for a few cuts. Looking forward to a response. Greetings, Mike Fernau.
This message has been automatically translatedAs with most askers, I also have the problem that the LED constantly flashes red on my hedge trimmer Bosch EasyPrune. The scissors can no longer be charged - it doesn't work anymore. Why aren't the answers shown "for all readers"???
This message has been automatically translated3 comments
@Burkhard Meyer I solved my red flash problem. the wires inside are all damaged but we did not use it too much. we replaced the wires. but now the machine is useless again since the scissors are sequizing and being locked. not working properly. very bad engineering.
@Burkhard Meyer my items is also same, the wires inside are very very weak, need to repair inside the wires
@Burkhard Meyer
My Bosch EasyPrune always flashes red quickly and the device cannot be charged anymore. Purchased in December 2019. What can I do?
This message has been automatically translated1 comment
@Matthias Durst the wires inside are broken becouse of the bad engineering. the wires are being rubbed and spoiled. same my bosch easy prune not working
My Easy Prune does not open anymore. When charging, it always flashes rapidly in red. Bought on 12/14/19. What now?
This message has been automatically translated1 comment
@Emma The charger worked yesterday and hasn't moved from the charging site. The red flashing indicator hasn't altered in 10 hours of charging and only flashes when the easyprune is attached to the charger, suggesting that the charge is fine. Its something in the secateurs.
The secateurs have jammed shut (no material stuck between the blades). Any suggestions of how to fix?
2 comments
To fix the stuck blades of the Bosch EasyPrune hedge trimmer, please follow these steps: 1. Check the pressure on the handles: Make sure you are applying enough pressure on the handles while cutting or pruning. Press the handles firmly together during the cutting process. 2. Release the blades: If the blades are stuck in a thick branch, try to release them by holding the tool only by the upper handle and moving the blades back and forth. 3. Charge the battery: If the tool stops while cutting or pruning, it may be due to low battery power. Charge the battery fully before using the tool again. 4. Avoid cutting thick or hard wood: If you are trying to cut a branch that is too thick or hard for the EasyPrune, try to find a thinner section of the branch to cut. 5. Check the LED indicator: If the LED indicator on the tool blinks red, it may indicate a problem. Refer to the manual for specific troubleshooting steps based on the number of red blinks.
This answer is automatically generated@Stephen Raleigh continious red flashes were my problem we opened and repaired the broken wires. but now I am facing the problem as yours. machine is squizing and not releasing the knives
The secateurs are charging showing a green light but the battery operation is not happening. I can only use them as standard secateurs not power boosted
Could you explain what the settings are on the top of The Bosch Easy Prune Secateurs, ie: where Red Sliding Lever is and the charging point. I notice that there are 3 positions. One of the positions locks the handles and fully exposes the charging point. With the Red sliding lever pulled fully to the rear the charging point is complete hidden and the secateurs operate. Could you explain what the 3rd position is ie: when the Red Sliding Lever is in the middle position and the Charging Point is partially visible. What does this particular position do. Is it any different to when the Red Lever is pull all the way to the rear? Thanks in advance for your response. Regards, Paul.