View the manual for the Bosch EasyHedgeCut 45 here, for free. This manual comes under the category hedge trimmers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch EasyHedgeCut 45 or do you need help? Ask your question here

The Bosch EasyHedgeCut 45 is an electric hedge trimmer designed to provide efficient and precise trimming of hedges and shrubs. Powered by an AC power source, it has a 420 W engine that delivers reliable performance. Featuring a 450 mm blade size, the EasyHedgeCut 45 enables you to effectively trim branches and foliage with ease. The blade operates at an idle speed of 3400 RPM, ensuring fast and efficient cutting. Weighing 2600 g, this hedge trimmer is relatively lightweight, reducing fatigue during prolonged use. Its compact dimensions of 803 mm in depth, 160 mm in width, and 187 mm in height allow for easy maneuverability and storage. Built with premium materials, the EasyHedgeCut 45 is designed to withstand the demands of regular use, ensuring durability over time. With its user-friendly design, this hedge trimmer offers easy handling and control, allowing you to achieve precise and uniform cuts. It is equipped with a comfortable grip that enables a firm hold, minimizing the risk of accidents. The Bosch EasyHedgeCut 45 is suitable for both professional landscapers and homeowners who require a reliable and efficient tool for maintaining their hedges and shrubs. Its powerful motor, combined with its sharp and durable blade, ensures accurate and clean cuts. Overall, the Bosch EasyHedgeCut 45 is a high-quality hedge trimmer that offers the perfect balance of power, precision, and durability for effective hedge maintenance.
| Brand | Bosch |
| Model | EasyHedgeCut 45 | 0 600 847 A31 |
| Product | hedge trimmer |
| EAN | 4059952575032 |
| Language | English |
| Filetype | User manual (PDF) |
| Power source | AC |
| Engine power | 420 W |
| Blade size | 450 mm |
| Idle speed | 3400 RPM |
| Weight | 2600 g |
| Depth | 803 mm |
| Width | 160 mm |
| Height | 187 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch EasyHedgeCut 45 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.
The Bosch EasyHedgeCut 45 has a weight of 2600 g.
The Bosch EasyHedgeCut 45 has a height of 187 mm.
The Bosch EasyHedgeCut 45 has a width of 160 mm.
The Bosch EasyHedgeCut 45 has a depth of 803 mm.
Yes, the Bosch EasyHedgeCut 45 has an engine power of 420 W, which ensures a strong cutting performance compared to other hedge trimmers.
The Bosch EasyHedgeCut 45 features a 450 mm blade size, allowing for efficient trimming of hedges and shrubs in a shorter amount of time.
Yes, the idle speed of the Bosch EasyHedgeCut 45 is 3400 RPM, providing quick and precise cutting results, making it a favorable choice for users who value speed and accuracy.
Yes, the Bosch EasyHedgeCut 45 operates on AC power, ensuring a continuous supply of electricity and eliminating the need for battery replacements or recharges. This makes it a convenient option for longer cutting sessions.
To switch on the Bosch EasyHedgeCut 45 hedge trimmer, follow these steps: 1. Check that the power source voltage matches the voltage specified on the rating plate of the machine. 2. Locate the On/Off switch on the hedge trimmer. It is labeled as (2) in the manual. 3. Press and hold the lock-off button for the On/Off switch (labeled as (3) in the manual). 4. While still holding the lock-off button, press the On/Off switch and keep it pressed. 5. The hedge trimmer should now be switched on and ready to use. To switch off the hedge trimmer, follow these steps: 1. Release the lock-off button for the On/Off switch. 2. Release the On/Off switch. Remember to always disconnect the plug from the power source or remove the battery pack before making any adjustments, changing accessories, or storing the hedge trimmer. Store the hedge trimmer out of the reach of children and only allow trained users to operate it. Regularly maintain the hedge trimmer by checking for any misalignment, binding of moving parts, or damage. Keep the cutting tools sharp and clean for optimal performance.
The Bosch EasyHedgeCut 45 hedge trimmer may not switch on due to several reasons. Here are the steps to troubleshoot the issue: 1. Check if the power is turned on. Make sure the switch is in the "on" position. 2. Verify the mains socket. If the trimmer is connected to a faulty socket, try using another socket. 3. Inspect the mains cable for any damage. If the cable is damaged, contact a service agent for repair or replacement. 4. Check the fuse. If the fuse is faulty or blown, replace it with a new one. 5. If the hedge trimmer operates intermittently, there may be a defect in the internal wiring. Contact a service agent for assistance. 6. If the motor runs but the blades remain stationary, there may be an internal error. Again, contact a service agent for repair. 7. If the cutting blade becomes hot, it may be blunt. Have the blade sharpened. 8. Inspect the cutting blade for any dents. If there are dents, have the blade inspected or overhauled. 9. Apply lubricant spray to reduce friction if there is too much resistance while operating the trimmer. 10. If the trimmer experiences excessive vibrations or noise, there may be a defect. Contact a service agent for further assistance. Remember to always follow the maintenance and cleaning instructions provided in the manual to ensure the proper functioning of the hedge trimmer.
To move the Bosch EasyHedgeCut 45 trimmer along the cutting line, follow these steps: 1. Before starting, ensure that the trimmer is in good working condition. Check the cutter blades, blade bolts, and cutter assembly for any wear or damage. Do not operate the trimmer if any part is damaged. 2. Hold the trimmer with both hands, gripping the handles firmly. The trimmer is designed with two handles, each with a blade control switch. Both switches must be actuated simultaneously to operate the trimmer. 3. Position yourself in a comfortable and stable stance, ensuring proper footing and balance. Be aware of your surroundings and stay alert for any potential hazards. 4. Start cutting the hedge only in daylight or in good artificial light to ensure visibility. 5. Begin by positioning the trimmer at the starting point of the cutting line. Hold the trimmer at a slight angle, with the blades parallel to the hedge surface. 6. Slowly move the trimmer along the cutting line, maintaining a steady and controlled motion. Use smooth and even strokes to achieve an even cut. 7. As you move the trimmer, keep an eye on the cutting line to ensure that you are following it accurately. Adjust your position and angle as needed to maintain the desired cutting line. 8. Continue moving the trimmer along the cutting line until you have trimmed the entire length of the hedge. 9. After completing the trimming, switch off the trimmer and disconnect it from the power source. Remember to always prioritize safety when using the trimmer. Follow the manufacturer's instructions and guidelines to ensure a safe and efficient trimming experience.
The Bosch EasyHedgeCut 45 hedge trimmer may not be cutting the hedge evenly due to several possible reasons. Here are the steps to troubleshoot and address the issue: 1. Check the cutter blades, blade bolts, and cutter assembly for wear or damage. If any parts are damaged, do not operate the trimmer and replace them. 2. Ensure that the hedge trimmer is powered on. If it is not operating, check if the power is turned off or if there is a faulty mains socket. Turn on the power or use another socket if necessary. 3. Inspect the mains cable for any damage. If the cable is damaged, contact a service agent for repair or replacement. 4. If you are using an extension cable, check if it is damaged. Replace the extension cable if it is damaged. 5. Check the fuse in the hedge trimmer. If it is faulty or blown, replace it with a new one. 6. If the motor runs but the blades remain stationary, there may be an internal wiring defect or a defective on/off switch. Contact a service agent for assistance. 7. If the cutting blade becomes hot, it may be blunt. Have the blade sharpened or inspected for any dents. Excessive friction due to a lack of lubricant can also cause uneven cutting. Apply a lubricant spray to reduce friction. 8. If the hedge trimmer produces excessive vibrations or noise, it may be defective. Contact a service agent for further assistance. Remember to perform regular maintenance, cleaning, and storage of the hedge trimmer according to the instructions provided in the manual. Replace worn or damaged parts with Bosch-approved replacements for safety.
Yes, the manual of the Bosch EasyHedgeCut 45 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0