View the manual for the Bosch EasyHedgeCut 18-45 here, for free. This manual comes under the category hedge trimmers and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch EasyHedgeCut 18-45 or do you need help? Ask your question here

The Bosch EasyHedgeCut 18-45 is a hedge trimmer designed for efficient and precise trimming. Equipped with a double blade, this trimmer ensures clean and neat cuts. The blade measures 450 millimeters in size and has a tooth spacing of 15 millimeters, allowing for effective cutting of branches and twigs. Operating at an idle speed of 2400 RPM, the EasyHedgeCut 18-45 offers a powerful and efficient performance. However, it is important to note that the vibration emission of this trimmer is 2.5 m/s², with an uncertainty level of 1.5 m/s². This means that some vibration may be experienced during use, though it is within acceptable limits. Weighing in at 2300 grams, the EasyHedgeCut 18-45 is lightweight and easy to handle, reducing user fatigue and allowing for extended periods of use. Powered by an 18 V battery, this trimmer offers cordless convenience, providing freedom of movement without the restriction of a power cord. Additionally, the battery is removable, allowing for easy replacement or use with other compatible Bosch power tools. With its sturdy construction and reliable performance, the Bosch EasyHedgeCut 18-45 is a durable hedge trimmer that offers efficient cutting capabilities. Whether trimming hedges, shrubs, or bushes, this trimmer is designed to deliver precise and clean cuts, ensuring a well-maintained and visually appealing landscape.
| Brand | Bosch |
| Model | EasyHedgeCut 18-45 | 0 600 849 H03 |
| Product | hedge trimmer |
| EAN | 4059952574974 |
| Language | English |
| Filetype | User manual (PDF) |
| Blade type | Double blade |
| Blade size | 450 mm |
| Blade tooth spacing | 15 mm |
| Product color | Black, Green |
| Idle speed | 2400 RPM |
| Vibration emission | 2.5 m/s² |
| Uncertainty K | 1.5 m/s² |
| Weight | 2300 g |
| Power source | Battery |
| Engine power | - W |
| Battery voltage | 18 V |
| Removable battery | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch EasyHedgeCut 18-45 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.
The Bosch EasyHedgeCut 18-45 has a weight of 2300 g.
First, attach the front handle securely by aligning it with the designated slots and tightening the screws provided. Then, attach the blade cover by sliding it over the blade and securing it with the provided screw. Finally, mount the battery by sliding it into the battery compartment until it clicks into place.
The ideal blade length for the Bosch EasyHedgeCut 18-45 is 45 centimeters. This length provides a good balance between versatility and maneuverability, allowing you to trim both small and medium-sized hedges effectively.
To adjust the cutting angle, simply loosen the angle adjustment knob located near the front handle. Once loose, you can swivel the cutting blade in the desired direction. Once you have set the desired angle, tighten the adjustment knob to secure it in place.
The Bosch EasyHedgeCut 18-45 is compatible with a 18-volt lithium-ion battery. It is recommended to use Bosch batteries specifically designed for this model to ensure optimal performance and runtime.
After each use, make sure to disconnect the battery and wipe the hedge trimmer with a clean, damp cloth to remove any debris or sap. Be cautious not to get water into the unit. Additionally, regularly inspect the blade for damage or dullness and replace if necessary. A sharp blade ensures cleaner cuts and prolongs the life of the hedge trimmer.
Yes, the Bosch EasyHedgeCut 18-45 has a double blade. This means it can cut more efficiently and quickly compared to single blade hedge trimmers.
The blade size of the Bosch EasyHedgeCut 18-45 is 450 mm. This size allows for a larger cutting area, making it suitable for trimming larger hedges and shrubs.
The tooth spacing of the blades in the Bosch EasyHedgeCut 18-45 is 15 mm. This spacing is ideal for trimming medium to thick branches and provides a clean and precise cut.
The idle speed of the Bosch EasyHedgeCut 18-45 is 2400 RPM. This high speed ensures fast and efficient cutting, allowing the user to trim their hedges and shrubs quickly.
Yes, the battery of the Bosch EasyHedgeCut 18-45 is removable. This allows for easy replacement or swapping of batteries, ensuring uninterrupted trimming sessions.
Yes, the manual of the Bosch EasyHedgeCut 18-45 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1Where are the graphics pages in the manual for the EasyHedgeCut 18-45
1 comment
Battery not holding charge for more than 1 minute