View the manual for the Bosch EasyHedgeCut 12-35 here, for free. This manual comes under the category grass trimmers and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Bosch EasyHedgeCut 12-35 or do you need help? Ask your question here

The Bosch EasyHedgeCut 12-35 is a lightweight and compact grass trimmer designed for efficient and precise cutting. With a battery capacity of 2.5 Ah, it provides a reliable power source for extended usage. Weighing just 1900 g, it is easy to handle and maneuver, reducing user fatigue during operation. The trimmer features a fast charging time of 1.08 h, allowing for quick turnaround between uses. With a stroke rate of 2400 spm (strokes per minute), it delivers efficient cutting performance. The vibration emission of 2.5 m/s² ensures minimal discomfort during prolonged use, while the uncertainty K of 1.5 m/s² emphasizes stability and control. Equipped with a shrub blade and a tooth spacing of 15 mm, the EasyHedgeCut 12-35 offers versatility in tackling both grass trimming and shrub shaping tasks. The inclusion of a soft grip enhances user comfort and ease of handling. A charging indicator is also provided, allowing users to monitor the battery status conveniently. Powered by a 12 V battery voltage, this grass trimmer ensures reliable performance without the need for cords or gasoline. Its compact size and lightweight design make it suitable for users with limited storage space or those seeking portability for on-the-go trimming tasks. In conclusion, the Bosch EasyHedgeCut 12-35 is a lightweight and versatile grass trimmer that offers efficient cutting performance. With its compact design, ergonomic features, and reliable battery, it provides a convenient solution for maintaining and shaping your lawn and shrubs.

| Brand | Bosch |
| Model | EasyHedgeCut 12-35 | 0 600 849 B07 |
| Product | grass trimmer |
| EAN | 3165140883924 |
| Language | English |
| Filetype | User manual (PDF) |
| Battery technology | Lithium-Ion (Li-Ion) |
| Battery capacity | 2.5 Ah |
| Charging time | 1.08 h |
| Battery voltage | 12 V |
| Weight | 1900 g |
| Weight | 1900 g |
| Stroke rate | 2400 spm |
| Vibration emission | 2.5 m/s² |
| Uncertainty K | 1.5 m/s² |
| Product color | Green, Red |
| Shrub blade | Yes |
| Blade width | - mm |
| Soft grip | Yes |
| Shrub blade tooth spacing | 15 mm |
| Charging indicator | Yes |
| Battery voltage | 12 V |
| Power source | Battery |
| Engine power | - W |
| Product color | Green, Red |
| Vibration emission | 2.5 m/s² |
| Uncertainty K | 1.5 m/s² |
| Blade size | 350 mm |
| Blade tooth spacing | 15 mm |
| No-load stroke rate | 2400 spm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch EasyHedgeCut 12-35 below.
The Bosch EasyHedgeCut 12-35 has a weight of 1900 g.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
Yes, Bosch EasyHedgeCut 12-35 comes with a shrub blade. This means users can easily trim not just regular hedges, but also shrubs with this product.
Yes, Bosch EasyHedgeCut 12-35 operates on a 12 V battery. This voltage is standard for cordless hedge trimmers and provides a good balance between power and portability.
The blade size of Bosch EasyHedgeCut 12-35 is 350 mm. This is a good size for cutting through various thicknesses of hedges and shrubs.
Yes, Bosch EasyHedgeCut 12-35 features a soft grip handle. This ensures users can comfortably operate the trimmer for extended periods without discomfort.
The charging time of Bosch EasyHedgeCut 12-35 is 1.08 hours. This is relatively quick for a cordless tool, allowing users to get back to work sooner.
1. Check if the battery is discharged and recharge it if needed. 2. Ensure that the safety switch is activated correctly according to the instructions in the manual. 3. If the hedgecutter operates intermittently, there may be internal wiring damage, and you should contact a Service Agent for assistance. 4. If the motor reverses repeatedly and then stops after 3 seconds, refer to the "Working Advice" section on Anti Blocking in the manual. 5. If the motor runs but the blades remain stationary, there may be an internal fault, and you should contact a Service Agent. 6. If the cutting blade is hot, it may be blunt, so have it sharpened. 7. If the blade has dents, have it inspected and overhauled. 8. If there is too much friction due to lack of lubricant, apply a lubricant spray as recommended. 9. If the blade will not move, check if the battery is discharged and recharge it if necessary. 10. If you experience excessive vibrations or noise, there may be a machine defect, and you should contact a Service Agent.
If the hedgecutter operates intermittently, the possible causes and corrective actions are as follows: - **Possible Cause**: Internal wiring of the machine is damaged. - **Corrective Action**: Contact a Service Agent for repair. - **Possible Cause**: On/Off switch is defective. - **Corrective Action**: Contact a Service Agent for repair. - **Possible Cause**: Motor reverses repeatedly then stops after 3 seconds. - **Corrective Action**: Refer to the "Working Advice" section on Anti Blocking in the manual. - **Possible Cause**: Motor runs but blades remain stationary. - **Corrective Action**: Internal fault, contact a Service Agent for repair. - **Possible Cause**: Cutting blade is hot. - **Corrective Action**: The cutting blade may be blunt, have it sharpened. - **Possible Cause**: Cutting blade has dents. - **Corrective Action**: Have the blade inspected and overhauled if necessary. - **Possible Cause**: Too much friction due to lack of lubricant. - **Corrective Action**: Apply lubricant spray to reduce friction. - **Possible Cause**: Battery is discharged. - **Corrective Action**: Recharge the battery. - **Possible Cause**: Machine is defective. - **Corrective Action**: Contact a Service Agent for repair.
Yes, the manual of the Bosch EasyHedgeCut 12-35 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 1How do I sharpen the blades