View the manual for the Bosch DWK09G660 here, for free. This manual comes under the category exhaust hoods and has been rated by 2 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Bosch DWK09G660 or do you need help? Ask your question here

| Brand | Bosch |
| Model | DWK09G660 | DWK09G660 |
| Product | exhaust hood |
| EAN | 4242002758435 |
| Language | English |
| Filetype | User manual (PDF) |
| Type of extraction | Ducted/Recirculating |
| Maximum extraction power | 660 m³/h |
| Maximum recirculating power | 550 m³/h |
| Number of speeds | 3 |
| Intensive speed | Yes |
| Minimum distance from gas hob | 450 mm |
| Minimum distance from electric hob | 450 mm |
| Noise level (high speed) | 63 dB |
| Type | Wall-mounted |
| Control type | Sensor |
| Number of motors | 1 |
| Cord length | 1.3 m |
| Exhaust connection diameter | 150 mm |
| Exhaust location | Top |
| Built-in display | No |
| Product color | Black |
| Housing material | Glass, Stainless steel |
| Motor power | 250 W |
| Auto power off | Yes |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Current | 10 A |
| Connected load | 290 W |
| Handheld remote control | No |
| Grease filter type | Aluminum |
| Dishwasher proof filter | Yes |
| Width | 898 mm |
| Depth | 339 mm |
| Height | 912 mm |
| Height (min) | 912 mm |
| Height (max) | 1107 mm |
| Height without chimney | 382 mm |
| Weight | 23000 g |
| Package weight | 39000 g |
| Illuminance | 374 lx |
| Number of bulbs | 2 bulb(s) |
| Bulb type | Halogen |
| Bulb power | 40 W |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch DWK09G660 below.
The Bosch DWK09G660 has a weight of 23000 g.
The carbon filter should be replaced every three to twelve months.
The metal grease filters should be cleaned every eight to ten weeks.
The model number of the hood is usually found on a white label inside the hood.
The Bosch DWK09G660 has a height of 912 mm.
The Bosch DWK09G660 has a width of 898 mm.
The Bosch DWK09G660 has a depth of 339 mm.
Yes, the Bosch DWK09G660 can be used for ducted extraction.
The Bosch DWK09G660 has a maximum extraction power of 660 m³/h.
Yes, the Bosch DWK09G660 does have an intensive speed option.
The Bosch DWK09G660 has an aluminium grease filter.
Yes, the Bosch DWK09G660 does have an auto power off feature. This means that it will automatically shut off after a certain period of time, providing convenience and energy efficiency to the user.
To properly use the Bosch DWK09G660 exhaust hood, follow these steps: 1. Turn on the exhaust hood at the beginning of cooking and let it run for a few minutes after cooking is finished. This helps to effectively eliminate cooking fumes. 2. Adjust the fan speed according to the current conditions. For dense steam or fumes, select a higher suction power. 3. To turn on the fan, press the button 1, 2, or 3 corresponding to the desired suction power. The button and the set suction power will light up for confirmation. 4. To turn off the fan, press the button %. 5. The fan continuation feature can be activated at any fan speed. Press and hold the button 2 for 2 seconds to activate it. The button and the set suction power will flash for confirmation. To stop the fan continuation prematurely, press the button %. 6. If there are strong odors or fumes, you can use the intensive speed. Press and hold the button 3 for 2 seconds to activate it. The button % will light up and the button 3 will flash for confirmation. To stop the intensive speed prematurely, press the button %. 7. The lighting can be turned on and off independently of the ventilation. Press the button @ to turn on/off the lighting. 8. To adjust the brightness of the lighting, hold down the button @ for 2 seconds. The brightness will decrease. The next time you turn on the lighting, it will be at maximum brightness. Remember to follow the cleaning and maintenance instructions provided in the manual to ensure safe and proper operation of the exhaust hood.
If the fan of the Bosch DWK09G660 exhaust hood is not working properly, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged in. 2. Clean the fan and filters: Over time, the fan and filters can accumulate dirt and grease, which can affect the performance of the fan. Clean the fan blades and filters according to the cleaning instructions provided in the manual. 3. Check for obstructions: Inspect the exhaust hood and the area around it for any obstructions that may be blocking the airflow. Remove any objects or debris that may be obstructing the fan. 4. Reset the settings: If the fan is not responding or operating as expected, try resetting the settings of the exhaust hood. Turn off the power to the hood, wait for a few seconds, and then turn it back on. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect and repair the exhaust hood if necessary. Remember to always refer to the manual for detailed instructions and safety precautions when troubleshooting or performing maintenance on the exhaust hood.
To continue the fan operation of the Bosch DWK09G660 exhaust hood, follow these steps: 1. Press the button 1, 2, or 3 to select the desired fan speed. The button and the set suction power will light up for confirmation. 2. To activate the fan continuation feature, hold down the button 2 for 2 seconds. The button and the set suction power will flash for confirmation. 3. To stop the fan continuation prematurely, press the button %. Note: The fan continuation feature can be activated at any fan speed and has a duration of 30 minutes. After the specified time, the ventilation will automatically stop, and the lighting will turn off. It is important to refer to the manual for specific instructions and safety precautions regarding the fan operation and other features of the exhaust hood. Regular maintenance and cleaning of the fan and filters are also recommended to ensure optimal performance.
If the intensive speed of the Bosch DWK09G660 exhaust hood is not functioning, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged in. 2. Reset the settings: If the intensive speed is not activating, try resetting the settings of the exhaust hood. Turn off the power to the hood, wait for a few seconds, and then turn it back on. 3. Clean the filters: Clogged filters can affect the performance of the intensive speed. Remove the filters and clean them according to the cleaning instructions provided in the manual. 4. Check for obstructions: Inspect the exhaust hood and the area around it for any obstructions that may be blocking the airflow. Remove any objects or debris that may be obstructing the fan. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect and repair the exhaust hood if necessary. Remember to always refer to the manual for detailed instructions and safety precautions when troubleshooting or performing maintenance on the exhaust hood.
If the lighting of the Bosch DWK09G660 exhaust hood is not working, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged in. 2. Replace the bulbs: If the lighting is not working, the bulbs may be defective or burnt out. Turn off the power to the hood and carefully replace the bulbs with new ones of the same type and wattage. Refer to the instructions provided in the manual for the specific bulb type and wattage. 3. Check the connections: Inspect the connections between the bulbs and the socket. Ensure that the bulbs are properly inserted and making a secure connection with the socket. 4. Reset the settings: If the lighting is still not working, try resetting the settings of the exhaust hood. Turn off the power to the hood, wait for a few seconds, and then turn it back on. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect and repair the exhaust hood if necessary. Remember to always refer to the manual for detailed instructions and safety precautions when troubleshooting or performing maintenance on the exhaust hood.
Yes, the manual of the Bosch DWK09G660 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0