View the manual for the Bosch DWK098G61 here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Bosch DWK098G61 or do you need help? Ask your question here





| Brand | Bosch |
| Model | DWK098G61 | DWK098G61 |
| Product | exhaust hood |
| EAN | 4242002821726 |
| Language | English |
| Filetype | User manual (PDF) |
| Type of extraction | - |
| Maximum extraction power | 850 m³/h |
| Fluid dynamic efficiency class | - |
| Lighting efficiency class | - |
| Grease filtering efficiency class | - |
| Number of speeds | 4 |
| Intensive speed | Yes |
| Noise level | 73 dB |
| Type | Wall-mounted |
| Product color | Black, Stainless steel |
| Control type | Touch |
| Built-in display | Yes |
| Display type | LED |
| Grease filter type | Synthetic |
| Energy efficiency class | A |
| Annual energy consumption | 50.2 kWh |
| Width | - mm |
| Height | 382 mm |
| Weight | 20000 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch DWK098G61 below.
The Bosch DWK098G61 has a weight of 20000 g.
The carbon filter should be replaced every three to twelve months.
The metal grease filters should be cleaned every eight to ten weeks.
The model number of the hood is usually found on a white label inside the hood.
The Bosch DWK098G61 has a height of 382 mm.
The Bosch DWK098G61 has a width of - mm.
The Bosch DWK098G61 has energy label A.
Yes, the Bosch DWK098G61 has a maximum extraction power of 850 m³/h. This is considered high and ensures efficient removal of smoke and odors from the kitchen.
Yes, the Bosch DWK098G61 has 4 different speeds. This allows the user to adjust the extraction power according to their cooking needs and preferences.
Yes, the Bosch DWK098G61 has an intensive speed function. This means that the hood can temporarily increase its extraction power to effectively eliminate strong odors or smoke from the kitchen.
Yes, the noise level of the Bosch DWK098G61 is 73 dB. While this is not the quietest exhaust hood available, it is a standard noise level for most range hoods and should not be overly disruptive during regular use.
Yes, the Bosch DWK098G61 has a built-in LED display. This provides the user with clear visibility of the selected settings and enhances the overall convenience and user-friendliness of the hood.
To troubleshoot if the Bosch DWK098G61 exhaust hood is not turning on when you press the power button, you can follow these steps: 1. Check the power connection: Ensure that the appliance is properly plugged into the electricity supply. If it is not plugged in, connect it to the power source. 2. Check for a power cut: Verify if there is a power cut in your area. Check if other kitchen appliances are working to determine if the issue is specific to the exhaust hood. 3. Check the fuse: Examine the fuse box to ensure that the fuse for the exhaust hood is not faulty. If the fuse is blown, replace it with a new one. 4. Contact the after-sales service: If the above steps do not resolve the issue, it is recommended to contact the after-sales service for further assistance. Provide them with the product number (E no.) and production number (FD no.) found inside the appliance for accurate advice. Please note that attempting any repairs yourself may be dangerous, and it is advisable to seek assistance from trained technicians.
If the interval ventilation feature of the Bosch DWK098G61 exhaust hood is not working as expected, you can try the following steps to troubleshoot the issue: 1. Check if the intensive mode or fan run-on is activated: The interval ventilation feature is not available when either the intensive mode or fan run-on is activated. Make sure that neither of these features is currently active. 2. Verify the interval ventilation settings: Press the H button to activate the interval ventilation. The 0 and H buttons should light up, indicating that the feature is switched on. If the interval ventilation is already activated, press the H button or the 0 button to switch it off. 3. Check for any error codes or indicators: Look for any error codes or indicators on the control panel that may indicate a problem with the interval ventilation feature. Refer to the manual for specific error code meanings and troubleshooting steps. 4. Reset the appliance: If the above steps do not resolve the issue, try resetting the appliance. Switch off the motor and the lighting, then press and hold the H button until the 0 button flashes three times. This will reset the saturation indicator for the metal grease filter and activated charcoal filter. If the problem persists, it is recommended to contact the after-sales service for further assistance. Provide them with the product number (E no.) and production number (FD no.) for accurate troubleshooting guidance.
If the fan of the Bosch DWK098G61 exhaust hood is not running for the specified run-on time after cooking is finished, you can try the following steps to troubleshoot the issue: 1. Check if the intensive mode is activated: The fan run-on time feature is not available when the intensive mode is activated. Make sure that the intensive mode is not currently active. 2. Verify the fan run-on time settings: Select the desired fan level for the run-on time. Press the "y" button to activate the fan run-on time. The "0" and "y" buttons should light up, indicating that the feature is switched on. 3. Check for any error codes or indicators: Look for any error codes or indicators on the control panel that may indicate a problem with the fan run-on time feature. Refer to the troubleshooting section of the manual for specific error code meanings and solutions. 4. Reset the appliance: If the above steps do not resolve the issue, try resetting the appliance. Switch off the motor and the lighting, then press and hold the "y" button until the "0" button flashes three times. This will reset the fan run-on time feature. If the problem persists, it is recommended to contact the after-sales service for further assistance. Provide them with the product number (E no.) and production number (FD no.) for accurate troubleshooting guidance.
If the lighting of the Bosch DWK098G61 exhaust hood is not turning on or off independently of the ventilation system, you can try the following steps to troubleshoot the issue: 1. Check the power connection: Ensure that the exhaust hood is properly plugged into the electricity supply. If it is not plugged in, connect it to the power source. 2. Verify the lighting settings: Press the "B" button to switch on the lighting. The "B" button should light up, indicating that the lighting is switched on. If the lighting is already activated, press the "B" button again to switch it off. 3. Check for any error codes or indicators: Look for any error codes or indicators on the control panel that may indicate a problem with the lighting feature. Refer to the troubleshooting section of the manual for specific error code meanings and solutions. 4. Reset the appliance: If the above steps do not resolve the issue, try resetting the appliance. Switch off the motor and the lighting, then press and hold the "H" button until the "0" button flashes three times. This will reset the saturation indicator for the metal grease filter and activated charcoal filter. If the problem persists, it is recommended to contact the after-sales service for further assistance. Provide them with the product number (E no.) and production number (FD no.) for accurate troubleshooting guidance.
To troubleshoot the saturation display of the Bosch DWK098G61 exhaust hood if it is not indicating when the filters need to be cleaned or replaced, you can follow these steps: 1. Check the saturation display: Look for the corresponding symbol on the control panel. If the symbol for the metal grease filter (H) or the metal grease filter and activated charcoal filter (y) is flashing, it indicates that the filters are saturated and need to be cleaned or replaced. 2. Clean or replace the filters: If the saturation display is indicating that the filters are saturated, follow the instructions in the manual for cleaning and maintenance. Remove the metal grease filters and clean them according to the recommended method. If the activated charcoal filters need to be replaced, refer to the manual for the correct replacement procedure. 3. Reset the saturation display: After cleaning or replacing the filters, you can reset the saturation display. Switch off the motor and the lighting, then press and hold the H button until the 0 button flashes three times. This will reset the saturation indicator for the metal grease filter and activated charcoal filter. If the saturation display issue persists or if you have any other concerns, it is recommended to contact the after-sales service for further assistance. Provide them with the product number (E no.) and production number (FD no.) for accurate troubleshooting guidance.
Yes, the manual of the Bosch DWK098G61 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0