Bosch DWB97CM50 manual

Bosch DWB97CM50
6.3 · 2
PDF manual
 · 16 pages
English
manualBosch DWB97CM50

3FHJTUFS

\RXU
QHZGHYLFHRQ
0\%RVFKQRZDQG
JHWIUHHEHQHILWV

CPTDIIPNFDPN

XFMDPNF

[en] Instructions for installation and use Extractor hood

Extractor hood

View the manual for the Bosch DWB97CM50 here, for free. This manual comes under the category exhaust hoods and has been rated by 2 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the Bosch DWB97CM50 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
E
Erwin Van HoofJanuary 29, 2021

The chimney shroud consists of 2 parts, an inner and outer piece. The inner piece contains a mesh. Should this be placed with the mesh facing upwards, towards the ceiling (visible), or with the mesh facing downwards so that the outer chimney shroud piece covers it. What is the purpose of this mesh?

This message has been automatically translated

The Bosch DWB97CM50 is an exhaust hood designed to effectively remove smoke, steam, and odors from your kitchen. With a built-in display absent, this hood offers a simple and sleek control panel, featuring both buttons and touch controls for ease of use. The cord length is 1.3 meters, providing flexibility when it comes to installation. Equipped with three LED bulbs, the exhaust hood offers ample illumination, ensuring visibility while cooking. The bulb type used is energy-efficient LED, with each bulb having a power of 1.5 watts. This contributes to a lighting efficiency class of A. The maximum extraction power of the Bosch DWB97CM50 is 430 cubic meters per hour, which helps to effectively remove airborne particles and maintain a clean kitchen environment. It offers a choice between ducted or recirculating extraction, allowing for increased flexibility in installation. The grease filtering efficiency class of this exhaust hood is B, indicating that it effectively traps grease particles during extraction. This helps in keeping the hood clean and maintaining its optimal performance over time. The exhaust connection diameter is 150 millimeters, providing compatibility with standard ducting systems. Overall, the Bosch DWB97CM50 is a reliable and efficient exhaust hood that offers convenient controls, effective illumination, and the option for ducted or recirculating extraction. With its sturdy construction and high extraction power, it ensures a fresh and pleasant cooking experience in your kitchen.

General
BrandBosch
ModelDWB97CM50 | DWB97CM50
Productexhaust hood
EAN4242005086603
LanguageEnglish
FiletypeUser manual (PDF), Energy label (PDF)
Design
Product colorStainless steel
Exhaust connection diameter150 mm
Number of motors1
Built-in displayNo
Control typeButtons, Touch
Cord length1.3 m
TypeWall-mounted
Lighting
Illuminance373 lx
Number of bulbs3 bulb(s)
Bulb typeLED
Bulb power1.5 W
Performance
Maximum extraction power430 m³/h
Type of extractionDucted/Recirculating
Grease filtering efficiency classB
Lighting efficiency classA
Fluid dynamic efficiency classA
Maximum recirculating power320 m³/h
Number of speeds3
Intensive speedYes
Noise level55 dB
Noise level (intensive speed)66 dB
Weight & dimensions
Width898 mm
Depth500 mm
Height628 mm
Height (min)628 mm
Height (max)1064 mm
Power
Energy efficiency classA+
Connected load145 W
Motor power140 W
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Annual energy consumption25.5 kWh
Filtering
Grease filter typeAluminum
Number of filters1 pc(s)
Removable filterYes
Washable filterYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch DWB97CM50 below.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

What is the height of the Bosch DWB97CM50?

The Bosch DWB97CM50 has a height of 628 mm.

What is the width of the Bosch DWB97CM50?

The Bosch DWB97CM50 has a width of 898 mm.

What is the depth of the Bosch DWB97CM50?

The Bosch DWB97CM50 has a depth of 500 mm.

What energy label does the Bosch DWB97CM50 have?

The Bosch DWB97CM50 has energy label A+.

What is the exhaust connection diameter of the Bosch DWB97CM50?

The exhaust connection diameter of the Bosch DWB97CM50 is 150 mm. This means that it is compatible with standard exhaust systems of that size.

How many motors does the Bosch DWB97CM50 have?

The Bosch DWB97CM50 has 1 motor. This indicates that it has a single source of power for efficient extraction.

Does the Bosch DWB97CM50 have a built-in display?

No, the Bosch DWB97CM50 does not have a built-in display. This means that the user will not have visual feedback or control options directly on the hood.

What is the illuminance of the Bosch DWB97CM50?

The illuminance of the Bosch DWB97CM50 is 373 lx. This indicates that it provides a sufficient level of lighting to illuminate the cooking area.

What is the maximum extraction power of the Bosch DWB97CM50?

The maximum extraction power of the Bosch DWB97CM50 is 430 m³/h. This shows that it has a high capacity to remove smoke, odors, and airborne grease from the kitchen.

How do I troubleshoot if the fan of the Bosch DWB97CM50 exhaust hood is not turning on?

To troubleshoot if the fan of the Bosch DWB97CM50 exhaust hood is not turning on, you can follow these steps: 1. Check the power connection: Ensure that the appliance is properly plugged into the electricity supply. If it is not, connect the appliance to the power source. 2. Verify power supply: Check if there is a power cut by testing other kitchen appliances to see if they are working. If there is a power cut, wait for the power to be restored. 3. Check the fuse: Inspect the fuse box to ensure that the fuse for the exhaust hood is not faulty. If the fuse is blown, replace it with a new one. 4. Contact after-sales service: If the above steps do not resolve the issue, it is possible that there may be a defect in the appliance. In this case, it is recommended to contact the after-sales service for further assistance. Please note that these troubleshooting steps are provided as a general guide and may vary depending on the specific situation. It is always advisable to consult the manual or contact the manufacturer's customer service for detailed and accurate troubleshooting instructions.

How do I troubleshoot if the fan settings of the Bosch DWB97CM50 exhaust hood are not working properly?

To troubleshoot if the fan settings of the Bosch DWB97CM50 exhaust hood are not working properly, you can follow these steps: 1. Check the power connection: Ensure that the exhaust hood is properly plugged into the power supply. 2. Verify the control panel: Make sure that the control panel is functioning correctly. Check if the symbols for fan settings are responsive when touched. 3. Restart the appliance: Turn off the exhaust hood and wait for a few seconds. Then, switch it back on to see if the fan settings start working. 4. Check for any error messages: Look for any error messages or indicators on the control panel that may indicate a specific issue with the fan settings. Refer to the manual for troubleshooting specific error codes. 5. Contact customer service: If the above steps do not resolve the issue, it is recommended to contact the Bosch customer service for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect and repair the exhaust hood if necessary. Remember to always follow the safety precautions mentioned in the manual and consult the manufacturer's customer service for accurate troubleshooting instructions.

How do I troubleshoot if the intensive setting of the Bosch DWB97CM50 exhaust hood is not functioning?

To troubleshoot if the intensive setting of the Bosch DWB97CM50 exhaust hood is not functioning, you can follow these steps: 1. Check the control panel: Ensure that the control panel is responsive and functioning properly. Make sure that the symbol for the intensive setting is visible and not damaged. 2. Restart the appliance: Turn off the exhaust hood and wait for a few seconds. Then, switch it back on to see if the intensive setting starts working. 3. Check for any error messages: Look for any error messages or indicators on the control panel that may indicate a specific issue with the intensive setting. Refer to the manual for troubleshooting specific error codes. 4. Clean the appliance: If there is a build-up of grease or dirt on the exhaust hood, it may affect the functioning of the intensive setting. Clean the appliance according to the instructions provided in the manual. 5. Contact customer service: If the above steps do not resolve the issue, it is recommended to contact the Bosch customer service for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect and repair the exhaust hood if necessary. Remember to always follow the safety precautions mentioned in the manual and consult the manufacturer's customer service for accurate troubleshooting instructions.

How do I troubleshoot if the lighting of the Bosch DWB97CM50 exhaust hood is not turning on/off?

To troubleshoot if the lighting of the Bosch DWB97CM50 exhaust hood is not turning on/off, you can follow these steps: 1. Check the power connection: Ensure that the exhaust hood is properly plugged into the power supply. 2. Verify the control panel: Make sure that the control panel is functioning correctly. Check if the symbol for the lighting is visible and not damaged. 3. Replace the light bulbs: If the lighting is not turning on, the bulbs may be faulty or burned out. Replace the bulbs with new ones of the same type and wattage. 4. Check the circuit breaker: Inspect the circuit breaker in the fuse box to ensure that it is not tripped. If it is, reset the circuit breaker and check if the lighting starts working. 5. Contact customer service: If the above steps do not resolve the issue, it is recommended to contact the Bosch customer service for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect and repair the exhaust hood if necessary. Remember to always follow the safety precautions mentioned in the manual and consult the manufacturer's customer service for accurate troubleshooting instructions.

How do I troubleshoot if the cleaning process of the Bosch DWB97CM50 exhaust hood is not effective?

To troubleshoot if the cleaning process of the Bosch DWB97CM50 exhaust hood is not effective, you can follow these steps: 1. Remove and clean the metal grease filters: Open the lock and swing down the metal grease filter. Take hold of the metal grease filter from underneath and remove it from the holder. Clean the metal grease filters using hot soapy water or in the dishwasher. Ensure they are thoroughly rinsed and left to drain on an absorbent material. 2. Clean the metal grease filter holder: Use a damp cloth to clean the metal grease filter holder inside the appliance. 3. Clean the glass: Use a soft cloth and glass cleaner to clean the glass surface of the exhaust hood. Avoid using a glass scraper. 4. Clean the controls: Use a damp dishcloth with hot soapy water to clean the controls. Ensure the controls are completely dry before use. 5. Avoid using aggressive cleaning products: Do not use aggressive, acidic, or alkaline cleaning products on the exhaust hood surfaces. They may damage the appliance. If the cleaning process is still not effective after following these steps, it is recommended to contact Bosch customer service for further assistance.

Is the manual of the Bosch DWB97CM50 available in English?

Yes, the manual of the Bosch DWB97CM50 is available in English .

Is your question not listed? Ask your question here

No results