Bosch DWB91PR50A manual

Bosch DWB91PR50A
7.5 · 1
PDF manual
 · 24 pages
English
manualBosch DWB91PR50A

3FHJTUFS

\RXU
QHZGHYLFHRQ
0\%RVFKQRZDQG
JHWIUHHEHQHILWV

CPTDIIPNFDPN

XFMDPNF

[en] Instructions for installation and use Extractor hood

Extractor hood

View the manual for the Bosch DWB91PR50A here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch DWB91PR50A or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
G
Gil; BeechenoFebruary 2, 2023

What size is the cutout for a DWB91PR50A induction cooktop in the benchtop.

The Bosch DWB91PR50A exhaust hood is a kitchen appliance that effectively removes smoke, odors, and grease particles from the air while cooking. This exhaust hood is designed to fit seamlessly into any modern kitchen decor. With its powerful extraction rate, the Bosch DWB91PR50A is capable of quickly and efficiently clearing the air in a kitchen of any size. It features multiple power levels, allowing users to adjust the extraction speed according to their cooking needs. Equipped with an efficient filter system, this exhaust hood effectively captures and filters out grease particles, preventing them from settling on kitchen surfaces. The filters are easily removable and dishwasher-safe, making maintenance a breeze. The Bosch DWB91PR50A exhaust hood utilizes energy-efficient LED lighting, providing bright and clear illumination of the cooking area. This energy-saving feature ensures optimal visibility while cooking. The hood operates at a low noise level, ensuring a quiet and peaceful cooking experience. The noise level is adjustable, allowing users to find their preferred balance between extraction power and noise. With its sleek and modern design, the Bosch DWB91PR50A seamlessly integrates into any kitchen decor. Its high-quality materials ensure durability and long-lasting performance. Overall, the Bosch DWB91PR50A exhaust hood is a reliable and efficient kitchen appliance that effectively removes smoke, odors, and grease particles from the air, while also providing bright and clear lighting for an optimal cooking experience.

General
BrandBosch
ModelDWB91PR50A
Productexhaust hood
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch DWB91PR50A below.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

How can I adjust the fan speed of the Bosch DWB91PR50A exhaust hood?

To adjust the fan speed of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Switch on the exhaust hood by touching the "#" symbol. 2. The fan will start at setting 2 automatically. 3. To set the optimum fan speed automatically, touch the ">" symbol. The PerfectAir sensor will detect the air quality and adjust the fan speed accordingly. 4. If you want to manually adjust the fan speed, touch symbols 1, 2, or 3 to select the desired setting. 5. For intensive mode, touch the "C" or "D" symbol. "C" represents intensive mode 1, and "D" represents intensive mode 2. 6. To switch off the exhaust hood, touch the "#" symbol or any fan setting. 7. The fan will switch off automatically if the PerfectAir sensor detects no further change in the air quality in the room. 8. If you want to change the sensitivity of the PerfectAir sensor, touch and hold the ">" symbol when the fan is switched off. The current setting will be displayed, and you can change it by touching symbols 1, 2, 3, "C", or "D". 9. The saturation indicators for the metal grease filters and activated charcoal filter will flash after the appliance is switched off. If necessary, clean the metal grease filters or replace the activated charcoal filter. 10. To reset the saturation indicators, touch the "#" symbol while they are flashing. By following these steps, you can easily adjust the fan speed of the Bosch DWB91PR50A exhaust hood according to your needs.

What should I do if the fan of the exhaust hood is not working?

If the fan of the Bosch DWB91PR50A exhaust hood is not working, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if there is any loose connection or tripped circuit breaker. 2. Reset the appliance: Switch off the exhaust hood and wait for a few seconds. Then, switch it back on to see if the fan starts working again. This can help reset any temporary issues. 3. Clean the filters: If the fan is not working due to clogged filters, clean the metal grease filters and replace the activated charcoal filter if necessary. Refer to the "Cleaning and maintenance" section in the manual for detailed instructions on how to clean and replace the filters. 4. Check the PerfectAir sensor: The fan speed of the exhaust hood is automatically adjusted by the PerfectAir sensor. Ensure that the sensor is not blocked or obstructed by any objects. You can also adjust the sensitivity of the sensor by following the instructions in the manual. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect and repair the exhaust hood if needed. By following these steps, you can troubleshoot and resolve the issue of the fan not working on the Bosch DWB91PR50A exhaust hood.

How do I switch on the automatic mode of the Bosch DWB91PR50A exhaust hood?

To switch on the automatic mode of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Touch the "#" symbol to switch on the exhaust hood. 2. The fan will start at setting 2 automatically. 3. To activate the automatic mode, touch the ">" symbol. 4. The exhaust hood will use the PerfectAir sensor to detect the air quality and adjust the fan speed accordingly. 5. The optimum fan setting will be set automatically based on the detected air quality. 6. To switch off the automatic mode, touch the "#" symbol or any fan setting. 7. The exhaust hood will switch off the automatic mode if the PerfectAir sensor detects no further change in the air quality in the room. 8. The automatic mode can run for a maximum of 4 hours. 9. If you want to change the sensitivity of the PerfectAir sensor, touch and hold the ">" symbol when the fan is switched off. 10. The current sensitivity setting will be displayed, and you can change it by touching symbols 1, 2, 3, "C", or "D". 11. Take your finger off the ">" symbol to save the new sensitivity setting. By following these steps, you can easily switch on the automatic mode of the Bosch DWB91PR50A exhaust hood and let it adjust the fan speed based on the detected air quality.

What should I do if the fan run-on time feature of the exhaust hood is not working?

If the fan run-on time feature of the Bosch DWB91PR50A exhaust hood is not working, you can try the following steps to troubleshoot the issue: 1. Ensure that the exhaust hood is switched on and the fan is running. 2. Check if the fan run-on time feature is enabled. To do this, touch the "y" symbol on the control panel. If the feature is enabled, the fan will continue to run for approximately 10 minutes after switching off the exhaust hood. 3. If the fan run-on time feature is not working, try resetting the appliance. Switch off the exhaust hood and wait for a few seconds. Then, switch it back on and check if the feature starts working again. 4. If the issue persists, it is possible that there is a malfunction in the fan run-on time feature. In this case, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect and repair the exhaust hood if needed. By following these steps, you can troubleshoot and resolve the issue of the fan run-on time feature not working on the Bosch DWB91PR50A exhaust hood.

How do I switch between the exhaust air mode and the circulating-air mode of the Bosch DWB91PR50A exhaust hood?

To switch between the exhaust air mode and the circulating-air mode of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Ensure that the exhaust hood is switched off. 2. To switch to the exhaust air mode, open the window or a door in the kitchen to provide sufficient air supply. This mode extracts the air from the room and expels it outside through a duct. 3. To switch to the circulating-air mode, close the window or door in the kitchen. In this mode, the exhaust hood filters the air and recirculates it back into the room. 4. To select the desired mode, touch the "A" symbol on the control panel for exhaust air mode or the "B" symbol for circulating-air mode. 5. The selected mode will be indicated on the control panel. 6. To switch off the exhaust hood, touch the "#" symbol or any fan setting. By following these steps, you can easily switch between the exhaust air mode and the circulating-air mode of the Bosch DWB91PR50A exhaust hood according to your ventilation needs.

How can I adjust the fan speed of the Bosch DWB91PR50A exhaust hood?

To adjust the fan speed of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Switch on the exhaust hood by touching the "#" symbol. 2. The fan will start at setting 2 automatically. 3. To set the optimum fan speed automatically, touch the ">" symbol. The PerfectAir sensor will detect the air quality and adjust the fan speed accordingly. 4. If you want to manually adjust the fan speed, touch symbols 1, 2, or 3 to select the desired fan setting. 5. For intensive mode, touch the "C" or "D" symbol. "C" represents intensive mode 1, and "D" represents intensive mode 2. 6. To switch off the fan, touch the "#" symbol or any fan setting. 7. The fan will also switch off automatically if the PerfectAir sensor detects no further change in the air quality in the room. 8. If you want to change the sensitivity setting of the PerfectAir sensor, touch and hold the ">" symbol when the fan is switched off. Then, select symbols 1, 2, 3, "C", or "D" to adjust the sensitivity. 9. The saturation indicator will flash if the metal grease filters or activated charcoal filter are saturated. Refer to the "Cleaning and maintenance" section in the manual for instructions on cleaning or replacing the filters. 10. To switch the exhaust hood to air recirculation mode, touch and hold the "D" symbol, then select the corresponding symbol for the desired mode. 11. The lighting of the exhaust hood can be switched on and off independently of the fan by touching the "B" symbol. 12. To adjust the brightness of the lighting, press and hold the "B" symbol until the desired brightness is reached. 13. If you want to enable or disable the audible signal, touch and hold the "#" and "y" symbols simultaneously for approximately 3 seconds when the fan is switched off. Please note that these instructions are based on the Bosch DWB91PR50A exhaust hood and may vary slightly for other models.

Why is the fan of the exhaust hood not working?

If the fan of the Bosch DWB91PR50A exhaust hood is not working, you can try the following steps to troubleshoot the issue: 1. Check if the exhaust hood is switched on. Touch the "#" symbol to switch it on. 2. Ensure that the fan setting is not set to 0. Touch symbols 1, 2, or 3 to select the desired fan setting. 3. If the fan is still not working, check if the fan run-on time feature is activated. Touch the "y" symbol to switch it off. 4. Verify if the PerfectAir sensor is functioning properly. Touch the ">" symbol to activate the automatic mode and let the sensor adjust the fan speed accordingly. 5. If the fan still does not work, check if the metal grease filters or activated charcoal filter are saturated. The corresponding symbols "#" and "1" or "#" and "2" will flash if they need cleaning or replacement. Refer to the "Cleaning and maintenance" section in the manual for instructions. 6. If none of the above steps resolve the issue, it is recommended to contact Bosch customer support for further assistance. Please note that these troubleshooting steps are based on the Bosch DWB91PR50A exhaust hood and may vary slightly for other models.

How do I switch on the automatic mode of the Bosch DWB91PR50A exhaust hood?

To switch on the automatic mode of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Touch the "#" symbol to switch on the exhaust hood. 2. The fan will start at setting 2 automatically. 3. To activate the automatic mode, touch the ">" symbol. 4. The exhaust hood's PerfectAir sensor will detect the intensity of cooking and roasting odors and adjust the fan speed accordingly. 5. The optimum fan setting will be set automatically based on the sensor's detection. 6. To switch off the automatic mode, touch the "#" symbol or any fan setting. 7. The fan will switch off automatically if the PerfectAir sensor detects no further change in the air quality in the room. 8. If you want to change the sensitivity setting of the PerfectAir sensor, touch and hold the ">" symbol when the fan is switched off. 9. Select symbols 1, 2, 3, "C", or "D" to adjust the sensitivity setting. 10. Release the ">" symbol to save the new sensitivity setting. Please note that these instructions are specific to the Bosch DWB91PR50A exhaust hood and may vary for other models.

Why is the fan run-on time feature not working properly?

The fan run-on time feature of the Bosch DWB91PR50A exhaust hood may not be working properly due to the following reasons: 1. Check if the fan run-on time feature is activated. To switch it off, touch the "y" symbol. 2. Ensure that the fan run-on time is not set to 0. After approximately 10 minutes of operation, the fan should switch off automatically. 3. Verify if the PerfectAir sensor is functioning correctly. The sensor detects changes in air quality and adjusts the fan speed accordingly. If the sensor is not detecting any change, the fan may not run for the specified run-on time. 4. If the metal grease filters or activated charcoal filter are saturated, the fan run-on time feature may not work properly. The corresponding symbols "#" and "1" or "#" and "2" will flash if the filters need cleaning or replacement. Refer to the "Cleaning and maintenance" section in the manual for instructions. 5. If none of the above steps resolve the issue, it is recommended to contact Bosch customer support for further assistance. Please note that these troubleshooting steps are specific to the Bosch DWB91PR50A exhaust hood and may vary for other models.

How do I switch between the exhaust air mode and the circulating-air mode of the exhaust hood?

To switch between the exhaust air mode and the circulating-air mode of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Ensure that the exhaust hood is switched off. If it is currently running, touch the "#" symbol to switch it off. 2. To switch to the exhaust air mode, touch and hold the "D" symbol until the corresponding symbol for exhaust air mode appears. 3. The exhaust air mode allows the hood to extract cooking odors and fumes from the kitchen and expel them outside through a duct. 4. To switch to the circulating-air mode, touch and hold the "D" symbol again until the corresponding symbol for circulating-air mode appears. 5. The circulating-air mode recirculates the air in the kitchen through activated carbon filters, removing odors and fumes before releasing the air back into the room. 6. Once you have selected the desired mode, release the "D" symbol. 7. The exhaust hood is now set to the selected mode, and you can switch it on by touching the "#" symbol. Please note that these instructions are specific to the Bosch DWB91PR50A exhaust hood and may vary for other models.

How can I adjust the fan speed of the Bosch DWB91PR50A exhaust hood?

To adjust the fan speed of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Switch on the exhaust hood by touching the "#" symbol. 2. The fan will start at setting 2 automatically. 3. To set the optimum fan speed automatically, touch the ">" symbol. The PerfectAir sensor will detect the air quality and adjust the fan speed accordingly. 4. If you want to manually adjust the fan speed, touch symbols 1, 2, or 3 to select the desired setting. 5. For intensive mode, touch symbols C or D. Intensive mode 1 is represented by symbol C, and intensive mode 2 is represented by symbol D. 6. To switch off the fan, touch the "#" symbol or any fan setting. 7. The fan will also switch off automatically after approximately 10 minutes of operation. Please note that these instructions are based on the Bosch DWB91PR50A exhaust hood manual and may vary slightly depending on the specific model or version.

What should I do if the fan of the exhaust hood is not working?

If the fan of the Bosch DWB91PR50A exhaust hood is not working, you can try the following steps to troubleshoot the issue: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. You can try plugging in another device to the same power outlet to verify if it is working. 2. Check the fan settings: Make sure that the fan is not set to the off position. You can adjust the fan speed by touching symbols 1, 2, or 3 on the control panel. If the fan is set to the off position, touch the "#" symbol to switch it on. 3. Check for any obstructions: Inspect the exhaust hood and the fan area for any debris, grease buildup, or other obstructions that may be blocking the fan. Clean the fan and surrounding area if necessary. 4. Reset the appliance: If the fan is still not working, you can try resetting the appliance. Switch off the exhaust hood by touching the "#" symbol, wait for a few seconds, and then switch it back on. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect and repair the exhaust hood if needed. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with the fan of the Bosch DWB91PR50A exhaust hood.

How do I switch on the automatic mode of the Bosch DWB91PR50A exhaust hood?

To switch on the automatic mode of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Touch the "#" symbol to switch on the exhaust hood. 2. The fan will start at setting 2 automatically. 3. To activate the automatic mode, touch the ">" symbol. 4. The exhaust hood's PerfectAir sensor will detect the air quality and set the optimum fan speed automatically. 5. The fan will adjust its speed based on the intensity of cooking and roasting odors detected by the sensor. 6. To switch off the automatic mode, touch the "#" symbol or any fan setting. 7. The fan will also switch off automatically if the PerfectAir sensor detects no further change in the air quality in the room. 8. Please note that the automatic mode can run for a maximum of 4 hours. These steps should help you switch on the automatic mode of the Bosch DWB91PR50A exhaust hood.

What should I do if the fan run-on time feature of the exhaust hood is not working?

If the fan run-on time feature of the Bosch DWB91PR50A exhaust hood is not working, you can try the following steps to troubleshoot the issue: 1. Ensure that the fan run-on time feature is enabled. This feature allows the fan to continue running for a certain period of time after you switch off the exhaust hood. 2. Check the settings of the exhaust hood. Make sure that the fan run-on time is not set to zero or disabled. You can adjust the fan run-on time by accessing the settings menu on the control panel. 3. Reset the appliance. Switch off the exhaust hood by touching the "#" symbol, wait for a few seconds, and then switch it back on. This can help reset any temporary issues with the fan run-on time feature. 4. If the issue persists, it is recommended to contact Bosch customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a service technician to inspect and repair the exhaust hood if needed. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with the fan run-on time feature of the Bosch DWB91PR50A exhaust hood.

How do I switch between the exhaust air mode and the circulating-air mode of the Bosch DWB91PR50A exhaust hood?

To switch between the exhaust air mode and the circulating-air mode of the Bosch DWB91PR50A exhaust hood, follow these steps: 1. Make sure the exhaust hood is switched off by touching the "#" symbol. 2. To switch to the exhaust air mode, open the window or a door in the kitchen to provide sufficient air supply. This mode extracts the cooking fumes and odors from the kitchen and expels them outside through a duct. 3. To switch to the circulating-air mode, close the window or door in the kitchen. In this mode, the exhaust hood filters the cooking fumes and odors through activated carbon filters and recirculates the clean air back into the kitchen. 4. To select the desired mode, touch the corresponding symbol on the control panel. The symbol for the exhaust air mode is represented by an arrow pointing upwards, and the symbol for the circulating-air mode is represented by an arrow forming a circle. 5. Once you have selected the mode, you can switch on the exhaust hood by touching the "#" symbol. 6. Please note that the mode selection may vary depending on the specific model or version of the Bosch DWB91PR50A exhaust hood. These steps should help you switch between the exhaust air mode and the circulating-air mode of the Bosch DWB91PR50A exhaust hood.

Is the manual of the Bosch DWB91PR50A available in English?

Yes, the manual of the Bosch DWB91PR50A is available in English .

Is your question not listed? Ask your question here

No results