View the manual for the Bosch DFS067A50 here, for free. This manual comes under the category exhaust hoods and has been rated by 3 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Bosch DFS067A50 or do you need help? Ask your question here


| Brand | Bosch |
| Model | DFS067A50 | DFS067A50 |
| Product | exhaust hood |
| EAN | 4242002878140 |
| Language | English |
| Filetype | User manual (PDF), Energy label (PDF) |
| Maximum extraction power | 740 m³/h |
| Type of extraction | Ducted/Recirculating |
| Fluid dynamic efficiency class | A |
| Lighting efficiency class | A |
| Grease filtering efficiency class | B |
| Intensive speed | Yes |
| Number of speeds | 3 |
| Noise level | 55 dB |
| Noise level (high speed) | 68 dB |
| Noise level (low speed) | 43 dB |
| Annual energy consumption | 35.3 kWh |
| Energy efficiency class | A |
| Connected load | 140 W |
| Motor power | 146 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Bulb power | 6 W |
| Illuminance | 683 lx |
| Bulb type | LED |
| Number of bulbs | 2 bulb(s) |
| Type | Semi built-in (pull out) |
| Built-in display | No |
| Number of motors | 2 |
| Product color | Silver |
| Housing material | Galvanized steel |
| Cord length | 1.75 m |
| Exhaust connection diameter | 120 mm |
| Control type | Buttons |
| Exhaust location | Top |
| Certification | CE |
| Grease filter type | Aluminum |
| Width | 598 mm |
| Depth | 290 mm |
| Height | 426 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch DFS067A50 below.
The Bosch DFS067A50 has the following certifications: CE.
The carbon filter should be replaced every three to twelve months.
The metal grease filters should be cleaned every eight to ten weeks.
The model number of the hood is usually found on a white label inside the hood.
The Bosch DFS067A50 has a height of 426 mm.
The Bosch DFS067A50 has a width of 598 mm.
The Bosch DFS067A50 has a depth of 290 mm.
The Bosch DFS067A50 has energy label A.
The maximum extraction power of the Bosch DFS067A50 is 740 m³/h. This means that it is capable of efficiently extracting a large volume of air from your kitchen, ensuring effective ventilation.
Yes, the Bosch DFS067A50 does have an intensive speed feature. This allows for quick and powerful extraction when needed, such as when cooking with strong odors or high heat.
The annual energy consumption of the Bosch DFS067A50 is 35.3 kWh. This indicates that it is energy-efficient and will not significantly increase your electricity bill.
The noise level of the Bosch DFS067A50 is 55 dB. This means that it operates relatively quietly and will not cause a major disturbance in your kitchen.
The Bosch DFS067A50 has 2 motors. This provides powerful extraction capabilities, ensuring effective removal of smoke, odors, and grease from your kitchen.
To adjust the fan speed on the Bosch DFS067A50 exhaust hood, follow these steps: 1. Locate the control panel on the exhaust hood. 2. To switch on the fan, pull out the filter pull-out and press the "#" button. The fan will start at setting 2. 3. To change the fan strength, press the "+" button to increase the speed or the "-" button to decrease the speed. 4. To switch off the fan, press the "#" button again. 5. If you need to activate the intensive setting for a large buildup of odors and fumes/vapors, press the "+" button until all of the LEDs in the display light up. The intensive setting will be activated. 6. After approximately six minutes, the electronics will automatically reduce the fan to a lower setting. If you want to end the intensive setting before the preset time expires, press the "-" button until the desired fan setting is reached. 7. The fan run-on time will be activated when you slide in the filter pull-out. The fan will automatically switch off after approximately 10 minutes. 8. The lighting can be switched on and off independently of the ventilation by pressing the "A" button. By following these steps, you can easily adjust the fan speed on the Bosch DFS067A50 exhaust hood.
If the fan is not turning on when you press the power button on the Bosch DFS067A50 exhaust hood, you can try the following troubleshooting steps: 1. Check if the appliance is properly plugged in. Ensure that the plug is securely inserted into the power outlet. 2. Verify if there is a power cut in your area. Check if other kitchen appliances are working to confirm if there is an issue with the power supply. 3. Inspect the fuse box to ensure that the fuse for the exhaust hood is not faulty. If the fuse is blown, replace it with a new one of the same rating. 4. If the lighting on the exhaust hood is also not working, it could indicate a problem with the bulbs. Refer to the manual for instructions on how to replace the bulbs. If the above steps do not resolve the issue, it is recommended to contact the after-sales service for further assistance. They will be able to provide specific troubleshooting guidance or arrange for a technician to inspect and repair the exhaust hood if necessary.
To activate the intensive setting on the Bosch DFS067A50 exhaust hood, follow these steps: 1. Ensure that the exhaust hood is turned on and the fan is running at any speed. 2. Press the "+" button on the control panel repeatedly until all of the LEDs in the display light up. This indicates that the intensive setting is activated. 3. The intensive setting is designed for situations where there is a large buildup of odors, fumes, or vapors in the kitchen. It provides a higher level of ventilation to quickly remove these pollutants. 4. After approximately six minutes, the exhaust hood's electronics will automatically reduce the fan speed to a lower setting. This is done to maintain a comfortable level of ventilation while still effectively removing odors and pollutants. 5. If you want to end the intensive setting before the preset time expires, press the "-" button until the desired fan setting is reached. 6. Remember that the intensive setting should be used sparingly and only when necessary, as it consumes more energy and may produce more noise compared to regular fan settings. By following these steps, you can easily activate the intensive setting on the Bosch DFS067A50 exhaust hood.
The recommended cleaning agent to use for cleaning the Bosch DFS067A50 exhaust hood depends on the specific surfaces of the appliance. Here are the recommended cleaning agents for different surfaces: 1. Stainless steel surfaces: Use hot soapy water to clean with a dishcloth, and then dry with a soft cloth. For stubborn dirt, you can use a special grease solvent that can be ordered via the Online Shop. Additionally, there are special stainless steel cleaning products available from the after-sales service or specialist retailers. Apply a very thin layer of the cleaning product with a soft cloth, cleaning in the grind direction only. 2. Painted surfaces: Clean using hot soapy water and a damp dishcloth, and then dry with a soft cloth or towel. Do not use any stainless steel cleaners on painted surfaces. 3. Aluminium and plastic surfaces: Use a glass cleaner and a soft cloth to clean these surfaces. 4. Glass surfaces: Clean with a glass cleaner and a soft cloth. Do not use a glass scraper. 5. Controls: Clean using hot soapy water and a damp dishcloth, and then dry with a soft cloth or towel. Avoid using a wet cloth on the operating controls to prevent the risk of electric shock or damage to the electronics. It is important to avoid using aggressive, acidic, or alkaline cleaning agents, as well as hard scouring pads or cleaning sponges.
If the Bosch DFS067A50 exhaust hood is making a loud noise when it is turned on, there could be several reasons for this issue. Here are some possible causes and troubleshooting steps: 1. Check for loose or damaged parts: Inspect the exhaust hood for any loose or damaged parts, such as the fan blades, motor, or mounting brackets. Tighten any loose parts or replace damaged components as necessary. 2. Clean the fan and filters: Accumulated grease or debris on the fan blades or filters can cause noise during operation. Clean the fan blades and filters according to the instructions in the manual to remove any buildup. 3. Check for obstructions: Ensure that there are no obstructions, such as utensils or debris, blocking the fan or air vents. Clear any obstructions to allow for proper airflow. 4. Adjust the fan speed: If the noise is primarily coming from the fan, try adjusting the fan speed to a lower setting. High fan speeds can sometimes generate more noise. 5. Contact customer support: If the noise persists after performing the above steps, it is recommended to contact the Bosch customer support for further assistance. They can provide specific troubleshooting guidance or arrange for a technician to inspect and repair the exhaust hood if necessary. By following these steps, you can identify and address the possible causes of the loud noise coming from the Bosch DFS067A50 exhaust hood.
Yes, the manual of the Bosch DFS067A50 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0