View the manual for the Bosch DEM63AC00 here, for free. This manual comes under the category exhaust hoods and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch DEM63AC00 or do you need help? Ask your question here





| Brand | Bosch |
| Model | DEM63AC00 | DEM63AC00 |
| Product | exhaust hood |
| EAN | 4242005041091 |
| Language | English |
| Filetype | User manual (PDF), Energy label (PDF) |
| Noise level (low speed) | 52 dB |
| Noise level (high speed) | 62 dB |
| Noise level | 62 dB |
| Intensive speed | No |
| Number of speeds | 3 |
| Maximum extraction power | 360 m³/h |
| Maximum recirculating power | - m³/h |
| Type of extraction | Ducted/Recirculating |
| Fluid dynamic efficiency class | E |
| Lighting efficiency class | A |
| Grease filtering efficiency class | C |
| Energy efficiency class | D |
| Annual energy consumption | 66 kWh |
| Connected load | 126 W |
| Motor power | 120 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Number of bulbs | 2 bulb(s) |
| Bulb type | LED |
| Bulb power | 6 W |
| Illuminance | 188 lx |
| Number of motors | 1 |
| Built-in display | No |
| Exhaust connection diameter | 120 mm |
| Exhaust location | Top |
| Type | Semi built-in (pull out) |
| Control type | Buttons |
| Cord length | 1.5 m |
| Product color | Silver |
| Grease filter type | Aluminum |
| Removable filter | Yes |
| Washable filter | Yes |
| Height | 402 mm |
| Width | 599 mm |
| Depth | 271 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch DEM63AC00 below.
The carbon filter should be replaced every three to twelve months.
The metal grease filters should be cleaned every eight to ten weeks.
The model number of the hood is usually found on a white label inside the hood.
The Bosch DEM63AC00 has a height of 402 mm.
The Bosch DEM63AC00 has a width of 599 mm.
The Bosch DEM63AC00 has a depth of 271 mm.
The Bosch DEM63AC00 has energy label D.
Yes, the Bosch DEM63AC00 has a low noise level of 52 dB at low speed. This means that it operates quietly, providing a peaceful cooking environment for the user.
No, the maximum extraction power of the Bosch DEM63AC00 is 360 m³/h, which is considered average compared to other comparable products. However, it is still efficient in removing smoke and odors from the kitchen.
No, the Bosch DEM63AC00 does not have an intensive speed option. This might be a drawback for users who require extra ventilation power for heavy-duty cooking.
The Bosch DEM63AC00 has a grease filtering efficiency class of C. While not the highest efficiency class, it still provides decent filtration of grease particles, ensuring a cleaner kitchen environment.
The Bosch DEM63AC00 has 2 bulbs, which are LED type bulbs. These bulbs have a power of 6 W and provide an illuminance of 188 lx, offering sufficient lighting while being energy-efficient.
To switch between the different operating modes of the Bosch DEM63AC00 exhaust hood, follow these steps: 1. Exhaust Air Mode: - Make sure the air is not discharged into a flue used for exhausting fumes from appliances burning gas or other fuels. - If you need to convey the exhaust air through the outer wall, use a telescopic wall box. - Obtain consent from the heating engineer responsible before conveying the exhaust air into a non-functioning smoke or exhaust gas flue. 2. Air Recirculation Mode: - Install an activated carbon filter to bind odors in air recirculation mode. - Refer to the brochure or ask your dealer for the different options for operating the appliance in air recirculation mode. - You can find the required accessories, including the activated carbon filter, from specialist retailers, customer service, or the Online Shop. To switch between these modes, use the control panel of the extractor hood: - To switch on the appliance, press button 1. The extractor hood will start at fan setting 1. - To select the desired fan setting, press the 2 or 3 button. - To switch off the appliance, press the # button. - The lighting can be switched on and off independently of the ventilation system by pressing the A button. Remember to switch on the extractor hood when you start cooking and switch it off several minutes after you have finished cooking for effective removal of kitchen fumes. Please note that these instructions are specific to the Bosch DEM63AC00 exhaust hood and may vary for other models or brands.
The exhaust air may not be properly conveyed by the Bosch DEM63AC00 exhaust hood due to the following reasons: 1. Discharging air into a flue used for exhausting fumes: Ensure that the exhaust air is not being discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels. This is not applicable to appliances that only discharge the air back into the room. 2. Conveying exhaust air through the outer wall: If you are conveying the exhaust air through the outer wall, make sure to use a telescopic wall box for proper installation. 3. Consent from the heating engineer: If you need to convey the exhaust air into a non-functioning smoke or exhaust gas flue, obtain the consent of the heating engineer responsible before doing so. To resolve these issues, ensure that the exhaust air is properly directed and not obstructed. If you are still experiencing problems with the exhaust air not being properly conveyed, it is recommended to consult a professional or contact customer service for further assistance. Please note that these troubleshooting steps are specific to the Bosch DEM63AC00 exhaust hood and may vary for other models or brands.
To install and replace the activated carbon filter for air recirculation mode in the Bosch DEM63AC00 exhaust hood, follow these steps: 1. Installation: - Ensure that the canopy of the extractor hood is open. - Obtain an activated carbon filter, which can be obtained from specialist retailers, customer service, or the Online Shop. - Refer to the brochure or ask your dealer for the different options for operating the appliance in air recirculation mode. - Follow the instructions provided in the manual for installing the activated carbon filter. Typically, you will need to insert the filter into the designated retainer and secure it in place. 2. Replacement: - Regularly service the activated carbon filter to ensure efficient odor filtration. It is recommended to replace the filter at least every 4 months. - Remove the metal grease filters from the extractor hood. - Turn and pull out the old activated carbon filters from the retainer. - Insert the new activated carbon filters into the retainer and securely turn them to lock them in place. - Fit the metal grease filters back into the extractor hood. Please note that these instructions are specific to the Bosch DEM63AC00 exhaust hood and may vary for other models or brands.
If the Bosch DEM63AC00 exhaust hood is not turning on/off or not responding to the control panel buttons, you can try the following troubleshooting steps: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged into the outlet. 2. Reset the appliance: If the exhaust hood is not responding, try resetting it by turning off the power supply for a few minutes and then turning it back on. This can help to resolve any temporary issues. 3. Check the control panel: Inspect the control panel for any visible damage or signs of malfunction. Clean the control panel using a soft, damp cloth to remove any dirt or debris that may be affecting the buttons' responsiveness. 4. Contact customer service: If the above steps do not resolve the issue, it is recommended to contact Bosch customer service for further assistance. They can provide specific troubleshooting guidance or arrange for a technician to inspect and repair the exhaust hood if necessary. Please note that these troubleshooting steps are specific to the Bosch DEM63AC00 exhaust hood and may vary for other models or brands.
If the lighting of the Bosch DEM63AC00 exhaust hood is not working independently of the ventilation system, you can try the following troubleshooting steps: 1. Check the power supply: Ensure that the exhaust hood is properly connected to a power source and that the power supply is functioning correctly. Check if the power cord is securely plugged into the outlet. 2. Check the lighting settings: Verify that the lighting settings are correctly configured. The extractor hood may have different lighting modes or settings that need to be adjusted. Refer to the control panel or user manual for instructions on how to adjust the lighting settings. 3. Replace the light bulbs: If the lighting is not working, the light bulbs may be faulty or burned out. Turn off the power supply and carefully replace the light bulbs with new ones of the appropriate type and wattage. Make sure to follow the instructions in the manual for replacing the light bulbs. 4. Contact customer service: If the above steps do not resolve the issue, it is recommended to contact Bosch customer service for further assistance. They can provide specific troubleshooting guidance or arrange for a technician to inspect and repair the lighting system if necessary. Please note that these troubleshooting steps are specific to the Bosch DEM63AC00 exhaust hood and may vary for other models or brands.
To switch between the different operating modes of the Bosch DEM63AC00 exhaust hood, follow these steps: 1. Exhaust air mode: Ensure that the air is not discharged into a flue used for exhausting fumes from appliances burning gas or other fuels. If you need to convey the exhaust air through the outer wall, use a telescopic wall box. Obtain consent from the heating engineer responsible before conveying the exhaust air into a non-functioning smoke or exhaust gas flue. 2. Air recirculation mode: Install an activated carbon filter to bind odors in air recirculation mode. You can find different options for operating the appliance in air recirculation mode in the brochure or by asking your dealer. The required accessories, including the activated carbon filter, are available from specialist retailers, customer service, or the Online Shop. 3. Operating the appliance: Open the canopy of the extractor hood. To switch on the appliance, press button 1. The extractor hood will start at fan setting 1. To select a different fan setting, press the 2 or 3 button. To switch off the appliance, press the # button. 4. Lighting: The lighting of the extractor hood can be switched on and off independently of the ventilation system. Press the A button to switch the lighting on or off. Remember to switch on the extractor hood when you start cooking and switch it off several minutes after you have finished cooking for effective removal of kitchen fumes.
The exhaust air may not be properly conveyed by the Bosch DEM63AC00 exhaust hood due to the following reasons: 1. Discharging air into a flue used for exhausting fumes: Ensure that the air is not discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels. This is not applicable to appliances that only discharge the air back into the room. 2. Conveying exhaust air through the outer wall: If you are conveying the exhaust air through the outer wall, make sure to use a telescopic wall box. It is important to obtain the consent of the heating engineer responsible before conveying the exhaust air into a non-functioning smoke or exhaust gas flue. 3. Air recirculation mode: If you are using the air recirculation mode, ensure that you have installed an activated carbon filter. This filter helps to bind odors. You can find different options for operating the appliance in air recirculation mode in the brochure or by asking your dealer. The required accessories, including the activated carbon filter, are available from specialist retailers, customer service, or the Online Shop. By addressing these factors, you can ensure that the exhaust air is properly conveyed by the Bosch DEM63AC00 exhaust hood.
To install and replace the activated carbon filter for air recirculation mode in the Bosch DEM63AC00 exhaust hood, follow these steps: 1. Installation: a. Open the canopy of the extractor hood. b. Locate the metal grease filters and remove them according to the instructions provided in the manual. c. Insert the activated carbon filter into the designated retainer. d. Ensure that the filter is securely in place. 2. Replacement: a. Open the canopy of the extractor hood. b. Remove the metal grease filters as instructed in the manual. c. Turn the old activated carbon filters and pull them out of the retainer. d. Take the new activated carbon filters and push them into the retainer, then turn them to secure them in place. e. Reinstall the metal grease filters. Note: The activated charcoal filters should be replaced at least every 4 months to ensure efficient odor filtration. The filters are not included in the delivery and can be obtained from specialist retailers, customer service, or the Online Shop. Remember that the activated charcoal filters cannot be cleaned or reactivated. By following these steps, you can properly install and replace the activated carbon filter for air recirculation mode in the Bosch DEM63AC00 exhaust hood.
There could be several reasons why the Bosch DEM63AC00 extractor hood is not turning on/off or not responding to the control panel buttons. Here are some possible causes: 1. Power supply: Check if the extractor hood is properly connected to the power supply. Ensure that the power cord is securely plugged into a functioning electrical outlet. 2. Circuit breaker: Verify if the circuit breaker for the extractor hood is tripped. If it is, reset the circuit breaker by switching it off and then on again. 3. Control panel lock: Determine if the control panel is locked. Some extractor hoods have a control panel lock feature to prevent accidental operation. Refer to the manual to learn how to unlock the control panel. 4. Faulty control panel: If none of the above steps resolve the issue, there may be a problem with the control panel itself. In this case, it is recommended to contact the after-sales service for further assistance and possible repairs. Remember to always follow safety precautions and consult the manual for specific instructions related to your Bosch DEM63AC00 extractor hood.
If the lighting of the Bosch DEM63AC00 extractor hood is not working independently of the ventilation system, there could be a few possible reasons for this issue. Here are some steps to troubleshoot the problem: 1. Check the power supply: Ensure that the extractor hood is properly connected to the power supply. Make sure the power cord is securely plugged into a functioning electrical outlet. 2. Verify the lighting settings: Confirm that the lighting settings are correctly adjusted. Some extractor hoods have separate controls for the ventilation system and the lighting. Check if the lighting is set to the desired level and not turned off. 3. Control panel lock: Determine if the control panel is locked. Some extractor hoods have a control panel lock feature to prevent accidental operation. Refer to the manual to learn how to unlock the control panel. 4. Faulty lighting components: If the above steps do not resolve the issue, there may be a problem with the lighting components of the extractor hood. In this case, it is recommended to contact the after-sales service for further assistance and possible repairs. Remember to always follow safety precautions and consult the manual for specific instructions related to your Bosch DEM63AC00 extractor hood.
Yes, the manual of the Bosch DEM63AC00 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0