Bosch D8128D manual

Bosch D8128D
7.5 · 1
PDF manual
 · 3 pages
English
manualBosch D8128D

Intrusion Alarm Systems | D8128D Octo-POPIT input module

D8128D Octo-POPIT input module

www.boschsecurity.com

u Provides point identification for initiating devices
u Expands the number of points in the system
u DIP switch programmable

The D8128D OctoPOPIT module combines the

functions of the D8125 POPEX module and the D8127

and D9127U and D9127T POPIT modules to provide

eight Class B (Style B) off-board points in a single

module. The D8128D OctoPOPIT and D8125 POPEX

modules can be wired in parallel to the ZONEX Bus

terminals on the same panel.

System overview

The module can be installed inside the enclosure of

the control panel, or the module can be installed in a

separate enclosure and connected to the control

panel.

Functions

Address Switches

There is a set of DIP switches for setting point

assignments and line termination. Switches 1 to 4

assign the sensor loops to point numbers on a

compatible control panel. Switch 5 sets the line

termination.

Point DIP Switches

Activate or deactivate each point connected to the

module by placing its respective DIP switch in the

closed or open position. The point DIP switch can be

used to deactivate conflicting points.

Certifications and approvals

Australia C-Tick
Region Regulatory compliance/quality marks
USA UL AMCX: Central Station Alarm Units
(UL1610, UL1635), AOTX: Local Alarm
Units (UL464, UL609), AOTX7: Local
Alarm Units Certified for Canada (cU-
Lus), APOU: Proprietary Alarm Units
(UL1076), NBSX: Household Burglar
Alarm System Units (UL1023), NBSX7:
Household Burglar Alarm System Units
Certified for Canada (cULus), UOXX:
Control Unit Accessories, System
(UL864, 9th edition), UTOU: Control
Units and Accessories - Household Sys-
tem Type (UL985), UTOU7: Control
Units and Accessories - Household Sys-
tem Type Certified for Canada (cULus)
UL UL 985 - Household Fire Warning Sys-
tem Units (6th edition)
UL UL 864 - Standard for Control Units and
Accessories for Fire Alarm Systems
(10th edition)
CSFM California State Fire Marshal
FDNY-
CoA
6059 [D9412GV3 & D7412GV3]
FDNY-
CoA
6286 D7412GV4 D9412GV4 NYC COA
6286 2018-2021

View the manual for the Bosch D8128D here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch D8128D or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
ModelD8128D | D8128D
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Design
Housing color-
Power
Power source typeDC
Features
Connectivity technologyWired
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch D8128D below.

Does the Bosch D8128D have a battery for backup power?

No, the Bosch D8128D does not have a battery for backup power. This means that the user will need to ensure a consistent power source for the device to operate effectively.

Is the connectivity technology of the Bosch D8128D wired-only?

Yes, the connectivity technology of the Bosch D8128D is wired-only. This means that the device cannot be connected wirelessly. While this may limit flexibility in terms of placement, it can provide a more stable and reliable connection compared to wireless options.

How do I troubleshoot if the Bosch D8128D module is not functioning properly?

To troubleshoot if the Bosch D8128D module is not functioning properly, you can follow these steps: 1. Check the power supply: Ensure that the module is receiving power. Verify the power connections and make sure the power source is functioning correctly. 2. Verify the wiring: Check the wiring connections between the D8128D module and the control panel. Ensure that the wires are properly connected and secure. 3. Check the module settings: Review the DIP switch settings on the module. Make sure the point assignments and line termination settings are correct. Adjust the DIP switches if necessary. 4. Test the connected devices: Verify that the devices connected to the D8128D module, such as sensors or initiating devices, are functioning correctly. Test each device individually to identify any issues. 5. Consult the control panel manual: If the module is still not functioning properly, refer to the control panel manual for further troubleshooting steps specific to your system. The control panel manual will provide detailed instructions on troubleshooting and resolving issues related to the D8128D module. By following these steps, you can troubleshoot and identify the cause of any malfunctioning issues with the Bosch D8128D module.

What should I do if the D8128D module is not compatible with my control panel?

If the D8128D module is not compatible with your control panel, you can take the following steps to address the issue: 1. Verify control panel compatibility: Check the compatibility list provided in the D8128D module's documentation or on the manufacturer's website. Ensure that your control panel model is listed as compatible with the D8128D module. 2. Consult the control panel manual: Refer to the control panel manual for information on compatible modules and expansion options. Check if there are any specific requirements or limitations for integrating the D8128D module with your control panel. 3. Contact technical support: If you are unsure about the compatibility or need further assistance, reach out to the manufacturer's technical support team. Provide them with the model numbers of both the D8128D module and your control panel. They can provide guidance on compatibility issues and suggest alternative solutions if necessary. 4. Consider professional installation: If the D8128D module is not compatible with your control panel, you may need to consider upgrading your control panel or seeking professional installation services. A professional installer can recommend compatible modules or provide alternative solutions to meet your requirements. By following these steps, you can address compatibility issues between the D8128D module and your control panel and find the best solution for your security system setup.

How can I troubleshoot if there is no connection between the D8128D module and the control panel?

To troubleshoot if there is no connection between the D8128D module and the control panel, you can follow these steps: 1. Check the wiring: Ensure that the wiring connections between the D8128D module and the control panel are secure and properly connected. Verify that the wires are not damaged or loose. 2. Verify power supply: Make sure that the D8128D module is receiving power from the control panel. Check the power connections and ensure that the power source is functioning correctly. 3. Check module settings: Review the DIP switch settings on the D8128D module. Ensure that the point assignments and line termination settings are correct. Adjust the DIP switches if necessary. 4. Test communication bus: Verify the communication bus between the D8128D module and the control panel. Check if there are any issues with the bus wiring or communication protocols. 5. Consult the control panel manual: If the connection issue persists, refer to the control panel manual for further troubleshooting steps specific to your system. The manual will provide detailed instructions on troubleshooting communication problems between the module and the control panel. By following these steps, you can troubleshoot and resolve connection issues between the D8128D module and the control panel.

What should I check if the D8128D module is not receiving power?

If the D8128D module is not receiving power, you can check the following: 1. Power source: Ensure that the power source is functioning correctly. Check if the power outlet or power supply is providing power. 2. Power connections: Verify that the power connections between the D8128D module and the power source are secure. Check if the power cables are properly connected and not damaged. 3. Fuse or circuit breaker: Check if the fuse or circuit breaker associated with the D8128D module is intact. Replace the fuse if necessary or reset the circuit breaker. 4. Power supply compatibility: Ensure that the power supply is compatible with the D8128D module. Check the specifications in the module's documentation or consult the manufacturer's guidelines. 5. Power supply voltage: Verify that the power supply voltage matches the required voltage for the D8128D module. Check the module's documentation for the specified voltage range. If the issue persists after checking these steps, it is recommended to consult the D8128D module's manual or contact the manufacturer's technical support for further assistance.

How do I troubleshoot if the D8128D module is not detecting inputs from the connected devices?

To troubleshoot if the D8128D module is not detecting inputs from the connected devices, you can follow these steps: 1. Check the wiring connections: Ensure that the devices are properly wired to the D8128D module. Verify that the wiring connections are secure and correctly connected to the designated input points on the module. 2. Verify device compatibility: Confirm that the connected devices are compatible with the D8128D module. Check the module's documentation or consult the manufacturer's guidelines to ensure that the devices meet the required specifications. 3. Test the devices individually: Disconnect each device from the D8128D module and test them individually. Verify if the devices are functioning correctly and detecting inputs. This will help identify if any specific device is causing the issue. 4. Check the module settings: Review the DIP switch settings on the D8128D module. Ensure that the point assignments and line termination settings are correctly configured. Adjust the DIP switches if necessary. 5. Consult the control panel manual: If the issue persists, refer to the control panel manual for further troubleshooting steps specific to your system. The manual will provide detailed instructions on troubleshooting input detection issues with the D8128D module. By following these steps, you can troubleshoot and resolve issues related to the D8128D module not detecting inputs from the connected devices.

Is the manual of the Bosch D8128D available in English?

Yes, the manual of the Bosch D8128D is available in English .

Is your question not listed? Ask your question here

No results