Bosch B36FD50SNS manual

Bosch B36FD50SNS
7.5 · 1
PDF manual
 · 92 pages
English
manualBosch B36FD50SNS
fr-ca HomeConnect™
46
Conseils
¡ Pour ce faire, observez les documents
HomeConnect™ fournis.
¡ Observez également les consignes dans
l’applicationHomeConnect™.
Remarques
¡ Observez les consignes de sécurité de la présente
notice d’utilisation et assurez-vous qu’elles sont
également respectées si vous utilisez l’appareil via
l’application HomeConnect™.
→

"Sécurité", Page32

¡ Les commandes sur l’appareil même ont toujours
priorité. Pendant ce temps, la commande via
l'application HomeConnect™ n'est pas possible.

10.1 Connecter l'appareil au réseau

domestique WLAN (Wi-Fi) avec la

fonction WPS

Si votre routeur dispose d'une fonction WPS, vous pouvez
connecter automatiquement l'appareil à votre réseau
domestique WLAN (Wi-Fi).
1. Appuyez sur .
a s'allume et l'affichage du sous-menu indique
⁠.
2. Appuyez sur / (sous-menu) jusqu'à ce que
l'affichage du sous-menu indique et que l'affichage
des réglages du sous-menu indique .
3. Appuyez sur (réglage du sous-menu).
a L'affichage des réglages du sous-menu montre une
animation pendant 2minutes. L'appareil est prêt pour la
connexion automatique au réseau domestique WLAN
(Wi-Fi).
4. Pendant ce temps, activez la fonction WPS sur le
routeur.
Veuillez tenir compte à cet effet des informations
contenues dans la documentation de votre routeur.
a Si la connexion est établie avec succès, clignote
dans l'affichage des réglages du sous-menu.
5. Si l'affichage des réglages du sous-menu indique
cela signifie qu'aucune connexion n'a pu être établie
entre l'appareil et le réseau domestique WLAN (Wi-Fi).
Vérifiez que l'appareil se trouve dans la zone de
portée du réseau domestique WLAN (Wi-Fi).
→

"Contrôler l’intensité du signal", Page47

Répétez l’opération ou établissez une connexion
manuelle →

Page46

.
6. Connectez l'appareil à l'appli HomeConnect.
→

Page46

10.2 Connecter l’appareil au réseau

domestique WLAN (Wi-Fi) sans la

fonction WPS

Si votre routeur ne dispose d'aucune fonction WPS, vous
pouvez connecter manuellement l'appareil à votre réseau
domestique WLAN (Wi-Fi). L’appareil établit
temporairement son propre réseau WLAN. Vous pouvez
connecter un appareil mobile au réseau WLAN et
transférer les informations du réseau domestique WLAN
(Wi-Fi) sur votre appareil.
Exigence:L'appli HomeConnect™est configurée sur
l'appareil mobile.
1. Appuyez sur .
a s'allume et l'affichage du sous-menu indique
⁠.
2. Appuyez sur / (sous-menu) jusqu'à ce que
l'affichage du sous-menu indique et que l'affichage
des réglages du sous-menu indique .
3. Appuyez sur (réglage du sous-menu).
a L'appareil établit un réseau WLAN propre avec le nom
de réseau «HomeConnect».
a L'affichage des réglages du sous-menu montre une
animation. L'appareil est prêt pour la connexion
manuelle au réseau domestique WLAN (Wi-Fi) .
4. Suivez les instructions figurant dans l'appli
HomeConnect™ sur l'appareil mobile.
a Les informations du réseau domestique WLAN (Wi-Fi)
seront transférées sur l'appareil.
a Si la connexion est établie avec succès, clignote
dans l'affichage des réglages du sous-menu.
5. Si l'affichage des réglages du sous-menu indique
cela signifie qu'aucune connexion n'a pu être établie
entre l'appareil et le réseau domestique WLAN (Wi-Fi).
Vérifiez que l'appareil se trouve dans la zone de
portée du réseau domestique WLAN (Wi-Fi).
→

"Contrôler l’intensité du signal", Page47

Répétez l’opération.

10.3 Connecter l'appareil à l'appli

HomeConnect™

Si vous avez connecté automatiquement votre appareil à
votre réseau domestique WLAN (Wi-Fi) , vous pouvez
connecter votre appareil avec l'appli HomeConnect™.
Exigence
¡ L'appareil est connecté au réseau domestique WLAN
(Wi-Fi). →

Page46

¡ L'appli HomeConnect™est configurée sur l'appareil
mobile.
1. Appuyez sur .
a s'allume et l'affichage du sous-menu indique
⁠.
2. Appuyez sur / (sous-menu) jusqu'à ce que
l'affichage du sous-menu indique et que l'affichage
des réglages du sous-menu indique .
3. Appuyez sur (réglage du sous-menu).
a L'affichage des réglages du sous-menu montre une
animation.
4. Suivez les instructions figurant dans l'appli
HomeConnect™jusqu'à ce que l'opération soit
terminée.
a Si la connexion est établie avec succès, l'affichage des
réglages du sous-menu indique .
5. Si l'affichage des réglages du sous-menu indique ,
aucune connexion n'a pu être établie entre l'appareil et
l'appli HomeConnect™.
Vérifiez dans l'appli HomeConnect™ si l'appareil
mobile est connecté au réseau domestique WLAN
(Wi-Fi) .
Répétez l’opération.
6. Si l'affichage des réglages du sous-menu indique ,
réinitialisez les réglages HomeConnect™. →

Page47

View the manual for the Bosch B36FD50SNS here, for free. This manual comes under the category freezers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bosch B36FD50SNS or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 11
M
Michael Pattavina August 31, 2023

My ice maker stops quite often and a E2 error shows. If I unplug it and plug it back in it will make ice for a while and stop again

My ice maker stops quite often and a E2 error shows. If I unplug it and plug it back in it will make ice for a while and stop...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

The freezer Bosch B36FD50SNS frequently stops and shows an E2 error. If disconnecting and reconnecting the power allows it to produce ice for a certain period before stopping again, there are a few potential causes and steps you can try: 1. Showroom mode: Check if the freezer is in showroom mode, which disables cooling functions. To disable showroom mode, press and hold the designated button for 15 seconds until you hear three audible signals. The control panel and interior lighting will briefly turn off, then you can check if the freezer is cooling. 2. Temperature alarm: The E2 error may indicate a temperature alarm. Turn off the freezer and unplug it from the power supply for 5 minutes. Then, plug it back in and turn it on again. If the error message still appears, it is recommended to contact customer service for further assistance. 3. Exterior ventilation grilles: Make sure there are no obstructions in front of the exterior ventilation grilles, as blocked grilles can affect the freezer's temperature regulation. 4. Water connection and hose: If water is leaking or dripping from the ice and water dispenser, check if the water connections are securely fastened and if the water hose is undamaged. Replace the water hose if necessary.

This answer is automatically generated
M
Mercedes May 24, 2024

B36FD50SNB/02 Is my model number. My freezer door has a gap on one side. It won’t seal shut. The seals are in good condition. Please advise.

C
Christine KordtApril 24, 2023

Door functions (water and ice) stopped working. We changed the water filter and still nothing- what should our next step be?

A
Ashley HouvourasMarch 24, 2024

My ice maker stops making ice on a regular basis … it will work for a couple days then stops. We have to turn the breaker off to reset it and sometimes that works . We changed the water filter and it made ice for two days after we changed it and now it has stopped again

S
SUZANNE COBBSeptember 3, 2023

I just purchased the B36FD50SNS/02 refrigerator. When I tested to see if the door alarm works by leaving the door open, it did NOT work after leaving the door open for 15 minutes or more. I obviously activated the door alarm button on the inside of the fridge.

F
FrankOctober 11, 2023

Why is the ice maker spitting out ice cubes? How do I make it stop

J
James bruceMay 13, 2024

Why does the Ice machine pop all the time.

Z
ZENDA BEECHINGSeptember 17, 2023

Where is the water shut off for ice maker

T
Tom HarrisNovember 24, 2023

Can you send me a service manual for the ice maker on model B36FD50SNS/01.

A
A. BlichfeldMarch 14, 2024

having difficulty installing replacement filter E-nr: B36FD50SNS/01

The Bosch B36FD50SNS is a freezer that offers ample storage space for your frozen food items. It has a sleek and modern design that will complement any kitchen decor. The stainless steel finish adds a touch of elegance to the overall look. With its spacious interior, the B36FD50SNS provides a generous 20.7 cubic feet of storage capacity. This allows you to store a large amount of frozen food, making it perfect for households with big families or individuals who like to stock up on groceries. The freezer is equipped with advanced features to ensure optimal performance. The NoFrost technology prevents the build-up of ice, eliminating the need for manual defrosting. This also helps to maintain a consistent temperature, preserving the quality of your food. The B36FD50SNS has multiple storage options to accommodate various items. The adjustable glass shelves allow you to customize the interior layout to suit your needs. The deep door bins provide additional storage space for smaller items such as ice cream containers or frozen vegetables. With its energy-efficient design, the B36FD50SNS helps you save on electricity bills. The freezer is equipped with LED lighting, which illuminates the interior in a bright and energy-efficient manner. Overall, the Bosch B36FD50SNS offers a spacious and reliable freezer solution for your kitchen. Its sleek design, advanced features, and energy-efficient operation make it a great addition to any household.

General
BrandBosch
ModelB36FD50SNS
Productfreezer
LanguageEnglish
FiletypeUse and Care Manual (PDF), Installation Guide (PDF), User manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch B36FD50SNS below.

How often should I defrost my freezer?

It is recommended to completely defrost your freezer at least once every six months.

How should I transport a freezer?

A freezer must be transported upright at all times. It is very bad for a freezer to be transported on its side as oil from the compressor can end up in the evaporator.

What do I do about a smelly freezer?

A commonly used method is to temporarily place a cup of vinegar in the freezer.

How do I set the temperature on my Bosch B36FD50SNS freezer?

A convenient way to set the temperature on your freezer is by using the control panel located on the front of the appliance. Simply press the "Temperature" button and then adjust the desired temperature using the "+" or "-" buttons.

How can I maximize the freezer's energy efficiency?

To optimize energy efficiency, ensure that the freezer is properly sealed by regularly cleaning the door gaskets and ensuring they are free from obstructions. Additionally, avoid placing hot or warm items directly inside the freezer as this can cause it to work harder to cool down.

What should I do if I notice frost buildup inside my freezer?

If you observe frost buildup inside the freezer, there are a few steps you can take. Firstly, check if the freezer door is closed securely and not left ajar. Secondly, make sure the temperature is set appropriately. Lastly, check if the door gaskets are sealing properly and not damaged. If the issue persists, it may be worth scheduling a service visit.

How can I safely defrost my Bosch B36FD50SNS freezer?

To defrost your freezer, start by removing all items and placing them in a cool area or another freezer if available. Turn off the freezer and keep the freezer door open to allow the ice to melt naturally. You can expedite the process by placing a towel or shallow pan to collect the melting water. Once the ice has melted, wipe down the interior with a clean cloth and then switch the freezer back on.

My freezer is making unusual noises, how can I troubleshoot this?

If your freezer is producing unusual noises, it is recommended to check for a few potential issues. Firstly, ensure that the freezer is level and stable on the floor. Sometimes, vibrations can occur if it is not properly aligned. Secondly, check if any items inside the freezer are touching or knocking against the walls, shelves, or other objects. These can cause rattling or vibrating sounds. Finally, make sure that the condenser coils located at the back of the freezer are clean and free from dust or debris, as this can also lead to noise.

Is the manual of the Bosch B36FD50SNS available in English?

Yes, the manual of the Bosch B36FD50SNS is available in English .

Is your question not listed? Ask your question here

No results