View the manual for the Bosch APC-AMC2-2WCF here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Bosch APC-AMC2-2WCF or do you need help? Ask your question here

The Bosch APC-AMC2-2WCF is a product that falls under the category of not categorized. With a weight of 503 g, a width of 90 mm, a depth of 63 mm, and a height of 232 mm, this product is compact and lightweight, making it easy to handle and transport. The display type of this product is LCD, allowing for clear and precise information to be displayed. In terms of certification, the Bosch APC-AMC2-2WCF holds an IP30 certification. This certification indicates that the product has a protection rating against dust and solid objects with a diameter greater than 2.5 mm. However, it may not have sufficient protection against the entry of water. Unfortunately, beyond these specifications, no other information is available to provide a more detailed and meaningful description of the Bosch APC-AMC2-2WCF. Therefore, it is not possible to provide further insight into the features, functions, or benefits of this product. In summary, the Bosch APC-AMC2-2WCF is a not categorized product with a weight of 503 g and dimensions of 90 mm in width, 63 mm in depth, and 232 mm in height. It features an LCD display type and holds an IP30 certification, indicating its limited protection against dust and solid objects. However, due to the lack of additional information, no further description or evaluation of this product can be provided.
| Brand | Bosch |
| Model | APC-AMC2-2WCF | APC-AMC2-2WCF |
| Product | not categorized |
| EAN | 4060039090256 |
| Language | English |
| Filetype | User manual (PDF) |
| Case design | - |
| Maximum number of doors | 2 door(s) |
| Built-in UPS | - |
| Interface | RJ-45 / RS-485 |
| Display type | LCD |
| Weight | 503 g |
| Width | 90 mm |
| Depth | 63 mm |
| Height | 232 mm |
| DC voltage range | 10 - 30 V |
| Certification | IP30 |
| Operating temperature (T-T) | 0 - 50 °C |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch APC-AMC2-2WCF below.
The Bosch APC-AMC2-2WCF has a weight of 503 g.
The Bosch APC-AMC2-2WCF has the following certifications: IP30.
The Bosch APC-AMC2-2WCF has a height of 232 mm.
The Bosch APC-AMC2-2WCF has a width of 90 mm.
The Bosch APC-AMC2-2WCF has a depth of 63 mm.
No, the Bosch APC-AMC2-2WCF supports a maximum of 2 doors. This means that it is suitable for small-scale applications with only a few doors.
The Bosch APC-AMC2-2WCF has an LCD display. This type of display provides clear and easy-to-read information for the user.
To troubleshoot if the Bosch APC-AMC2-2WCF is not functioning properly, follow these steps: 1. Check the power supply: Ensure that the voltage supplied to the controller is sufficient. Make sure the power is turned on and the power supply is providing enough voltage to power the controller. 2. Verify network connection: If the controller is not online, check the network connection. Plug the Ethernet cable securely into the controller. Also, ensure that the Ethernet interface is configured correctly. Refer to the manual for instructions on configuring the Ethernet interface. 3. Adjust DIL switch settings: If the controller is not working as expected, check the DIL switch settings. Set DIL switch 5 to ON if the SDEB protocol is selected, or set it to OFF if the BPA protocol is selected. 4. Power cycle the controller: Switch off the power of the controller and then turn it back on again. This can help reset any temporary issues. 5. Check the controller configuration: Verify the configuration settings of the controller. If necessary, delete all configuration data by resetting the device to factory default. Refer to the manual for instructions on resetting the controller software. If the problem persists or if you are unsure of the problem, it is recommended to contact After Sales Support for further assistance.
If the Bosch APC-AMC2-2WCF does not respond to user inputs, follow these steps: 1. Check the connection: Ensure that all cables and connections are securely plugged in. Verify that the controller is properly connected to the power supply and the network. 2. Restart the controller: Power off the controller and then turn it back on again. This can help reset any temporary issues. 3. Check the input devices: Verify that the input devices, such as locks or sensors, are functioning correctly. Ensure that they are properly connected to the controller and that there are no loose or damaged wires. 4. Reset the software: If the issue persists, you can reset the software of the controller. Insert a screwdriver into the reset button hole and press the reset button for at least three seconds. The controller will delete its application program and then download a fresh copy of the program and configuration. 5. Reset to factory default: If the problem still persists, you can reset the controller to factory default settings. Follow the instructions in the manual to reset the software and open the upper case of the controller. Set all six DIL switches of the RS-485 selector to ON and press the reset button on the board. If the problem continues, it is recommended to contact After Sales Support for further assistance.
To troubleshoot if the Bosch APC-AMC2-2WCF is not connecting to the network, follow these steps: 1. Check the network connection: Ensure that the Ethernet cable is securely plugged into the controller. Verify that the cable is not damaged and is connected to a functioning network port. 2. Configure the Ethernet interface: Make sure that the Ethernet interface is configured correctly. Refer to the manual for instructions on how to configure the Ethernet interface. Ensure that the correct settings, such as IP address and subnet mask, are entered. 3. Verify network compatibility: Ensure that the network you are connecting to is compatible with the controller. Use a CAT5 or higher version Ethernet cable to connect the controller to the network. 4. Restart the controller: Power off the controller and then turn it back on again. This can help refresh the network connection and resolve any temporary issues. 5. Flush DNS cache: If you have connected the controller to a network using DHCP and it is not recognized by the remote server, you can flush the DNS cache to accelerate the recognition process. Run the command "ipconfig /flushdns" to flush the DNS cache. If the issue persists, it is recommended to contact After Sales Support for further assistance.
If the Bosch APC-AMC2-2WCF is not providing the expected output, follow these steps: 1. Check the power supply: Ensure that the controller is receiving sufficient power. Verify that the power supply is connected properly and providing the correct voltage. 2. Verify the input devices: Check the input devices connected to the controller, such as locks or sensors. Ensure that they are functioning correctly and properly connected to the controller. Check for any loose or damaged wires. 3. Review the configuration settings: Verify the configuration settings of the controller. Ensure that the settings are correctly set according to your requirements. If necessary, refer to the manual for instructions on how to configure the controller. 4. Check for error messages: Look for any error messages or indicators on the controller's display or interface. These messages can provide valuable information about the issue and help in troubleshooting. 5. Reset the controller: If the problem persists, you can try resetting the controller to its factory default settings. Follow the instructions in the manual to perform a reset. Note that this will erase all configuration data, so make sure to backup any important settings before proceeding. If the issue continues, it is recommended to contact After Sales Support for further assistance.
To resolve any issues related to the Bosch APC-AMC2-2WCF not powering on or turning off unexpectedly, follow these steps: 1. Check the power supply: Ensure that the power supply is connected properly to the controller and that it is providing the correct voltage. Verify that the power cable is securely plugged in and that there are no loose connections. 2. Verify the power source: Ensure that the power source is functioning correctly. Check if there is power in the outlet by plugging in another device. If there is no power, try using a different outlet or check the circuit breaker. 3. Reset the controller: If the controller is not responding or turning off unexpectedly, try resetting it. Disconnect the power supply, wait for a few seconds, and then reconnect it. This can help resolve any temporary issues. 4. Check for overheating: Ensure that the controller is not overheating. Make sure that the ventilation slots are not blocked and that the controller is placed in a well-ventilated area. If necessary, clean the ventilation slots to remove any dust or debris. 5. Contact After Sales Support: If the issue persists or if you are unsure of the problem, it is recommended to contact After Sales Support for further assistance. They can provide expert guidance and help resolve any technical issues with the controller. Remember to always follow safety precautions and consult the manual for specific instructions if available.
Yes, the manual of the Bosch APC-AMC2-2WCF is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0