View the manual for the Bosch AKE 40 S here, for free. This manual comes under the category saws and has been rated by 7 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Bosch AKE 40 S or do you need help? Ask your question here


The Bosch AKE 40 S is a powerful saw designed for cutting wood, making it suitable for various woodworking projects. With a power of 1800 W, this saw provides ample power to effortlessly slice through wood with precision. The chain bar length of 400 mm allows for a wide cutting area, making it ideal for both small and large tasks. Featuring a chain gauge of 1.1 mm, the Bosch AKE 40 S ensures a clean and accurate cut every time. The chain speed of 9 m/s enables efficient cutting, saving time and effort. Weighing 4100 g, this saw is relatively lightweight, enhancing maneuverability and reducing user fatigue during prolonged use. The AC power source ensures a consistent power supply, eliminating the need for frequent battery changes. Constructed with sturdy materials, the Bosch AKE 40 S is built to withstand rigorous use and promises durability over time. Its design aims to promote reliability, ensuring that the tool remains functional even after extended periods of use. Overall, the Bosch AKE 40 S is a powerful and efficient saw, well-suited for woodworking projects of various sizes. Its 1800 W motor, 400 mm chain bar length, and 1.1 mm chain gauge make it a reliable choice for cutting wood with precision. With a weight of 4100 g, this saw balances power with maneuverability, allowing users to operate it comfortably. Designed with longevity in mind, the Bosch AKE 40 S is built to withstand constant use, making it a dependable tool for woodworkers.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch AKE 40 S below.
The Bosch AKE 40 S has a weight of 4100 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Make sure the power cord is securely plugged in and that the power source is functioning properly. Additionally, check if the safety switch located near the handle is engaged.
To adjust the chain tension, locate the chain tensioning wheel on the side of the saw near the blade. Use a suitable tool to turn the wheel clockwise to increase tension or counterclockwise to decrease tension as needed.
The chain may loosen over time due to normal wear. Ensure that you are correctly tensioning the chain before each use. If the chain continues to loosen excessively, it may be necessary to replace it or have the saw serviced.
Fill the chain oil reservoir located on the saw with a suitable chain lubricating oil. Ensure the oil level is adequate before each use. While operating the saw, the chain will automatically be lubricated by the oil reservoir.
Always wear appropriate personal protective equipment, including safety goggles, gloves, and ear protection. Ensure the work area is clear of debris and bystanders. Avoid cutting near electrical cables or other hazardous materials. Familiarize yourself with the safety features and operation of the saw before using it.
Yes, with a power of 1800 W, the Bosch AKE 40 S offers a high level of power for cutting through wood.
The chain gauge of the Bosch AKE 40 S is 1.1 mm, which is a standard size for chainsaws and allows for efficient cutting.
Yes, with a chain speed of 9 m/s, the Bosch AKE 40 S offers a fast cutting speed, allowing you to complete your tasks quickly.
The power source of the Bosch AKE 40 S is AC, meaning it is designed to be powered by an electrical outlet, providing consistent power for extended use.
Yes, the manual of the Bosch AKE 40 S is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 4the cover is stuck. I put it on too tight. Does it tighten with use?How can I remove it?
still no have power supply my bosch AKE40S even i charged 7hrs now,what is the main reason,although i used outlet and electric is 240w-260w..microwave oven outlet..
How do you clean oil channel when it is not working
chain saw stopped working for no apparent reason