View the manual for the Bosch AKE 35 here, for free. This manual comes under the category saws and has been rated by 2 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Bosch AKE 35 or do you need help? Ask your question here

The Bosch AKE 35 is a saw that offers a power output of 1800 watts. With a chain bar length of 350 millimeters, it is suitable for a wide range of cutting applications. The saw's chain speed is 9 meters per second, allowing for efficient and precise cuts. One of the notable features of the Bosch AKE 35 is its automatic oiling system, ensuring that the chain remains properly lubricated during operation. This helps to prolong the life of the chain and improves cutting performance. Weighing in at 4000 grams, the saw is relatively lightweight considering its power output. This makes it easier to handle and maneuver during use. The Bosch AKE 35 is powered by an AC source, providing consistent and reliable performance. Overall, the Bosch AKE 35 combines power, precision, and convenience. Its 1800 watt motor and 350 millimeter chain bar length make it suitable for various cutting tasks. The automatic oiling system ensures the chain remains properly lubricated, while the lightweight design enhances user comfort during operation.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch AKE 35 below.
The Bosch AKE 35 has a weight of 4000 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
A proper chain tension is essential for safe and effective cutting. To adjust the chain tension, locate the tensioning knob on the side of the saw. Rotate the knob clockwise to increase tension or counterclockwise to decrease tension, until the chain is snug against the guide bar but can still be pulled easily by hand.
It is crucial to use the correct type of oil for optimal chain lubrication. We recommend using high-quality bar and chain oil, designed specifically for use in chainsaws. This ensures proper lubrication and extends the life of the chain and guide bar.
Safety is paramount when starting your saw. To safely start the Bosch AKE 35, place the saw on a stable surface, engage the chain brake by pushing the front handguard forward until it clicks, and then firmly press the lock-off button. With your foot securely positioned on the rear handle, use your other hand to pull the starter cord until the engine fires. Release the lock-off button and allow the engine to idle for a moment before starting the cutting operation.
Knowing the maximum cutting depth helps ensure efficient and safe cutting. The Bosch AKE 35 has a maximum cutting depth of approximately 35 centimeters (or 14 inches) when using the entire length of the guide bar. Remember to consider the material's thickness and always make controlled and precise cuts.
Regular maintenance is vital for optimal performance. To maintain the guide bar and chain, it is recommended to regularly clean the guide bar groove, remove any debris, and inspect for any signs of wear. Additionally, keep the chain sharp by using a suitable file or chain sharpener to ensure efficient and safe cutting. Always refer to the manufacturer's guidelines for detailed maintenance instructions.
Yes, the Bosch AKE 35 has a power of 1800 W. This high power rating ensures strong cutting performance and makes it suitable for heavy-duty tasks.
Yes, the Bosch AKE 35 has a chain speed of 9 m/s. This fast chain speed enables efficient and quick cutting, making it ideal for tackling tough cutting jobs.
Yes, the Bosch AKE 35 has automatic oiling. This feature ensures that the chain is properly lubricated during operation, reducing friction and extending the life of the chain.
Yes, the Bosch AKE 35 operates on AC power. This means that it can be conveniently plugged into a power source, providing continuous and reliable power for uninterrupted operation.
Yes, the manual of the Bosch AKE 35 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 2I have a Bosch AKE35, and I think the chain has 'stretched' as I cannot tension it so it can continue to be used. What size replacement chain do I need to order? Thanks
Hello, My AKE 35 (NOT S) does not have a tensioning knob on it. How do I anyhow adjust the chain tension?