View the manual for the Bosch AHS 7000 Pro-T here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Bosch AHS 7000 Pro-T or do you need help? Ask your question here

The Bosch AHS 7000 Pro-T is a powerful and efficient electric saw designed for professional use. With a blade diameter of 34 millimeters and an output power of 700 watts, this saw offers excellent cutting performance. The idle speed reaches a maximum of 3000 RPM, allowing for quick and precise cuts. The blade bore of 700 millimeters ensures compatibility with a wide range of saw blades, providing versatility for different cutting tasks. Weighing 4500 grams, the Bosch AHS 7000 Pro-T is relatively lightweight, making it easy to handle and maneuver during operation. The power source for this saw is AC, ensuring continuous and reliable operation. With its high-quality construction and materials, the Bosch AHS 7000 Pro-T ensures durability and long-lasting performance. The saw is designed to withstand demanding professional use and can withstand the test of time. Whether you are cutting through wood, plastic, or other materials, the Bosch AHS 7000 Pro-T delivers efficient and reliable results. In conclusion, the Bosch AHS 7000 Pro-T is a powerful and reliable electric saw suitable for professional use. With its 34 millimeter blade diameter, 700 watt output power, and 700 millimeter blade bore, it offers excellent cutting performance and versatility. Weighing 4500 grams, it is lightweight and easy to handle. With its durable construction and AC power source, it ensures long-lasting performance and continuous operation.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch AHS 7000 Pro-T below.
The Bosch AHS 7000 Pro-T has a weight of 4500 g.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Ensure that the power cord is properly connected to a functioning power outlet and check if the on/off switch is in the "on" position. If the problem persists, it might be due to a faulty electrical connection or motor issue, and it is recommended to contact a professional for assistance.
To adjust the cutting height, locate the height adjustment lever or knob on the tool. Depending on the model, it may be positioned at the front or rear. Turn or slide the lever/knob to the desired cutting height, ensuring it locks into place securely.
The Bosch AHS 7000 Pro-T utilizes self-lubricating blades and does not require oiling. Therefore, it is not necessary to apply any oil to the blades.
Firstly, ensure that the tool is switched off and disconnected from the power source. Using a sturdy tool or stick, carefully push the stuck branch out from in between the blades, working from the opposite side of the cutting edge. Take caution to avoid any contact with the blades to prevent injury.
It is not recommended to use the hedge trimmer in wet conditions as water can affect the tool's electrical components, posing a safety risk. It is advised to wait for the hedge to dry or choose a different time to perform the trimming. Always prioritize safety when operating power tools.
The blade diameter of the Bosch AHS 7000 Pro-T is 34 mm. This is a standard size for a saw blade and allows for precise cutting.
The Bosch AHS 7000 Pro-T has an output power of 700 W. This is a high power rating for a saw, which means it can handle tough cutting tasks with ease.
The idle speed (max) of the Bosch AHS 7000 Pro-T is 3000 RPM. This high idle speed allows for fast and efficient cutting, making it a great tool for professional use.
The blade bore size of the Bosch AHS 7000 Pro-T is 700 mm. This is a standard bore size for a saw blade and ensures compatibility with a wide range of blades.
The power source of the Bosch AHS 7000 Pro-T is AC. This means it needs to be plugged into a power outlet to function. This makes it more convenient for continuous and heavy-duty use, as it doesn't rely on battery power.
Yes, the manual of the Bosch AHS 7000 Pro-T is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0