View the manual for the Bosch AHS 6000 PRO here, for free. This manual comes under the category hedge trimmers and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the Bosch AHS 6000 PRO or do you need help? Ask your question here
| Brand | Bosch |
| Model | AHS 6000 PRO |
| Product | hedge trimmer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch AHS 6000 PRO below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.
To ensure electrical safety when using the Bosch AHS 6000 PRO hedge trimmer: - Use approved extension cables that comply with H05VV-F or H05RN-F types. - Consider using a Residual Current Device (RCD) with a tripping current of not more than 30 mA for increased electrical safety. - Regularly inspect the connection lead for any damage and replace if necessary. - If the supply cord is damaged, have it replaced by a Bosch approved Service Agent. - Ensure that the mains plug attached to the machine is fitted correctly to the power supply cable. - Use only approved 13 A electric plugs and fuses for products sold in GB. - Always start and stop the hedge trimmer following the specified instructions to prevent accidents. - Position the extension cord over your shoulder and keep it behind you at all times during cutting to avoid damage. - Prioritize safety by switching off, removing the plug, and checking for any cable damage before adjusting or cleaning the hedge trimmer.
To ensure the safe and reliable operation of your Bosch AHS 6000 PRO hedge trimmer, follow these maintenance checks regularly: 1. Before any maintenance, always unplug the trimmer from the power supply. 2. Wear gloves when handling or cleaning the cutting blade. 3. Clean the cutting blade after each use and lubricate it with a protective spray, especially during longer cutting sessions. 4. Visually inspect the cutting blade for any damage and check the tightness of blade bolts. 5. Ensure the blade is covered with the blade guard provided. 6. Thoroughly clean the exterior of the trimmer using a soft brush and cloth, avoiding water, solvents, or polishes. 7. Store the hedge trimmer in a secure, dry place away from children and avoid placing objects on top of it. Performing these maintenance checks regularly will help keep your hedge trimmer in optimal condition for safe and reliable operation.
To ensure electrical safety when using the Bosch AHS 6000 PRO hedge trimmer, follow these steps: 1. Use the hedge trimmer in dry conditions and avoid using it in the rain. 2. Always switch off the trimmer and unplug it before adjusting, cleaning, or if the cable is damaged. 3. Keep a safe distance of at least 3 meters from other people and animals when operating the trimmer. 4. Wear appropriate protective gear such as sturdy footwear, gloves, and safety glasses. 5. Inspect the area for any obstacles before starting and remove them. 6. Check the cutter blades and cable for damage before each use. 7. Operate the trimmer with both hands and never hold it by the guard. 8. Store the trimmer in a dry and secure place out of reach of children. 9. Use only approved extension cables and consider using a Residual Current Device (RCD) for increased safety. 10. Regularly inspect the connection lead for damage and replace if necessary.
To avoid damage to the cutting blades and the drive when cutting with the Bosch AHS 6000 PRO hedge trimmer, follow these precautions: 1. Ensure the hedge trimmer is double insulated and does not require an earth connection. 2. Only use approved extension cables that comply with H05VV-F or H05RN-F types. 3. Use a Residual Current Device (RCD) with a tripping current of not more than 30 mA for increased electrical safety. 4. Position the extension cord over your shoulder to the rear and ensure it is behind you at all times during cutting. 5. Cut stems up to 24 mm in thickness and move steadily along the line of cut to feed stems directly into the cutter blades. 6. Cut the sides of the hedge first, then the top, and use a piece of string as an alignment guide for a level finish. 7. Take care to avoid cutting into objects like wire to prevent damage to the cutting blades and the drive.
Yes, the manual of the Bosch AHS 6000 PRO is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0