View the manual for the Bosch AHS 600-24ST here, for free. This manual comes under the category hedge trimmers and has been rated by 2 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Bosch AHS 600-24ST or do you need help? Ask your question here
| Brand | Bosch |
| Model | AHS 600-24ST |
| Product | hedge trimmer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch AHS 600-24ST below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.
If the Bosch AHS 600-24ST hedge trimmer does not operate when you turn it on, follow these steps: 1. Check the power supply and ensure the plug is securely connected. 2. Verify that the extension cord is in good condition and not damaged. 3. Press and hold the rear switch lever, then squeeze the front lever to start the trimmer. 4. If the trimmer still does not operate, release the switch levers to stop it. 5. Inspect the blade for any obstructions or blockages that may be preventing the trimmer from functioning. 6. If the blade is stuck, switch off the trimmer immediately and unplug it before removing the obstruction. 7. Always hold the trimmer away from yourself with both hands and maintain a stable position while operating. These steps should help troubleshoot and resolve the issue with the hedge trimmer not operating.
If the motor runs but the blades remain stationary during operation of the Bosch AHS 600-24ST hedge trimmer, follow these steps: 1. Check for internal faults in the motor. 2. Contact a service agent for assistance. 3. If the cutting blade is hot, it may be blunt or have dents. 4. Have the blade sharpened or overhauled accordingly. 5. Apply lubricant spray to reduce friction and ensure smooth blade movement. 6. Always ensure the machine is disconnected from the power source before inspecting or servicing it. 7. Remember that the blades may continue to move briefly after the hedge trimmer is turned off, so avoid touching them during this time.
To properly clean and store your Bosch AHS 600-24ST hedge trimmer for optimal performance and longevity, follow these steps: 1. After each use, inspect the hedge trimmer for any loose, dislodged, or damaged parts, including the blade, fixings, and components. 2. Check that the covers and guards are undamaged and correctly fitted before storing. 3. Clean the hedge trimmer by removing any debris or residue from the blades and body using a brush or cloth. 4. Store the hedge trimmer in a dry, high, or locked-up place out of the reach of children to prevent damage and ensure safety. 5. Replace any worn or damaged parts as needed to maintain the hedge trimmer's functionality. 6. Do not attempt to repair the hedge trimmer yourself unless you are qualified to do so. 7. Ensure that any replacement parts used are approved by Bosch for compatibility and safety.
Yes, the manual of the Bosch AHS 600-24ST is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0