View the manual for the Bosch AHS 42-16 here, for free. This manual comes under the category hedge trimmers and has been rated by 4 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Bosch AHS 42-16 or do you need help? Ask your question here
The Bosch AHS 42-16 hedge trimmer is a lightweight and compact tool designed for trimming hedges and shrubs. It features a 420mm blade length and 16mm tooth spacing, allowing for precise cutting of small to medium-sized branches. The trimmer is powered by a 420W motor, providing ample power for efficient trimming tasks. The AHS 42-16 is equipped with diamond-ground blades for clean and precise cuts, ensuring a neat finish to your hedges. The blade tip protector helps prevent damage when cutting along walls and paths, extending the life of the blades. The trimmer also has a transparent hand guard for added safety during use. With a weight of just 3.6kg, the Bosch AHS 42-16 is easy to maneuver and control, reducing fatigue during extended use. The ergonomic design and low vibration levels further enhance user comfort. The trimmer is corded, requiring a power source for operation. Overall, the Bosch AHS 42-16 hedge trimmer is a practical tool for maintaining small to medium-sized hedges and shrubs, offering a balance of power, precision, and ease of use.
| Brand | Bosch |
| Model | AHS 42-16 |
| Product | hedge trimmer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch AHS 42-16 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of hedge trimmer, it is therefore wise to wear hearing protection to be sure.
To assemble the Bosch AHS 42-16 hedge trimmer, start by connecting the two halves of the handle securely. Then, attach the blade cover by aligning it with the blade and sliding it into place until it locks.
To adjust the cutting height of the Bosch AHS 42-16 hedge trimmer, locate the cutting height adjustment lever on the side of the tool. Slide the lever up or down to achieve the desired cutting height.
Regularly inspect the blades of your Bosch AHS 42-16 hedge trimmer for any signs of dullness or damage. If needed, use a sharpening stone or file to gently sharpen the cutting edges to maintain optimal performance.
Always wear appropriate safety gear, including gloves and safety goggles, when using the Bosch AHS 42-16 hedge trimmer. Ensure the area is clear of any obstacles and bystanders before starting the tool. Additionally, avoid operating the trimmer in wet conditions to prevent potential electrical hazards.
After each use, unplug the Bosch AHS 42-16 hedge trimmer and remove any debris or plant residue from the blades. Inspect the power cord for any damage or wear. Regularly lubricate the blade with a recommended oil to keep it running smoothly. Store the trimmer in a dry place, safely away from children and pets.
Yes, the manual of the Bosch AHS 42-16 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 2why will my hedge trimmer not start?
What fuse is for this trimmer