View the manual for the Bosch AdvancedTableCut 52 here, for free. This manual comes under the category saws and has been rated by 2 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Bosch AdvancedTableCut 52 or do you need help? Ask your question here

| Brand | Bosch |
| Model | AdvancedTableCut 52 | 0 603 B12 000 |
| Product | saw |
| EAN | 3165140887571 |
| Language | English |
| Filetype | User manual (PDF) |
| Idle speed (max) | 8200 RPM |
| Cutting depth (90º) | 52 mm |
| Cutting depth (45º) | 35 mm |
| Sound pressure level | 90 dB |
| Sound power level | 100 dB |
| Sound level uncertainty | 3 dB |
| Rotational speed (max) | 8200 RPM |
| Cutting depth (90º) | 52 mm |
| Cutting depth (45º) | 35 mm |
| Sound pressure level | 90 dB |
| Sound power level | 100 dB |
| Uncertainty K | 3 dB |
| Saw blade included | - |
| Saw blade included | - |
| Diamond disc | - |
| Diamond disc | - |
| Power source | AC |
| AC input voltage | 220 - 230 V |
| AC input voltage | 220 - 230 V |
| Protection class | II |
| Protection class | II |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch AdvancedTableCut 52 below.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
To set up the Bosch AdvancedTableCut 52, begin by ensuring that the machine is on a stable and level surface. Then, securely attach the workpiece support and fence as instructed, ensuring proper alignment. Finally, double-check that all adjustments and settings are correctly configured for your specific cutting needs.
Adjusting the cutting depth on the Bosch AdvancedTableCut 52 is simple. First, locate the depth adjustment control, usually located on the side or front of the machine. Then, turn the control clockwise to increase the cutting depth and counterclockwise to decrease it. Ensure that you set the desired depth before operating the saw.
Prior to using the Bosch AdvancedTableCut 52, always wear appropriate personal protective equipment, such as safety glasses, hearing protection, and gloves. Additionally, ensure that the saw is in good working condition, the blade is properly installed and tightened, and that the workpiece is secured and stable before cutting. Remember to always follow safe operating procedures to prevent accidents.
Changing the blade on the Bosch AdvancedTableCut 52 is a straightforward process. First, ensure that the saw is turned off and unplugged. Locate the blade changing mechanism, usually near the blade guard or underneath the table. Follow the instructions to safely remove the old blade and securely install the new one, ensuring proper blade orientation and tightness.
Regular maintenance is crucial for maintaining the performance and longevity of the Bosch AdvancedTableCut 52. Some important tasks include cleaning the saw after each use to remove dust and debris, checking and adjusting the blade alignment and tension periodically, lubricating moving parts when necessary, and inspecting the power cord and plug for any damage. Performing these tasks will help keep your saw in optimal condition.
The maximum idle speed of Bosch AdvancedTableCut 52 is 8200 RPM. This high speed allows for efficient cutting and increased productivity.
The sound pressure level of Bosch AdvancedTableCut 52 is 90 dB. This means that the saw produces a moderate level of noise during operation.
The power source of Bosch AdvancedTableCut 52 is AC, which means it needs to be plugged into an electrical outlet for operation.
The protection class of Bosch AdvancedTableCut 52 is II. This indicates that the saw provides an extra layer of protection against electric shock.
The maximum rotational speed of Bosch AdvancedTableCut 52 is 8200 RPM. This high speed allows for precise and efficient cutting of various materials.
Yes, the manual of the Bosch AdvancedTableCut 52 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Bosch and is the answer not in the manual?
Question and answer
Number of questions: 0