Bosch 8 Logixx WIS24141 manual

Bosch 8 Logixx WIS24141
9.7 · 1
PDF manual
 · 8 pages
English
manualBosch 8 Logixx WIS24141
1 2 3 4 5
6
End of programme when ...
... the indicator light End is on.
Terminating the programme
For programmes at high temperature:
Cool washing: Select 2 Rinse/Freshen Up.
Select $ Start/Pause.
For programmes at low temperature:
Select Spin or > Drain.
Select $ Start/Pause.
Change programme if ...
... you have mistakenly selected a wrong programme:
Reselect programme.
Select $ Start/Pause.
The new programme starts from the beginning.
Cancel Programme
Select $ Start/Pause.
If required, top up washing (do not leave door open
for a long time – water from the washing could run out
of the open door).
Select $ Start/Pause.
Correct installation according
to separate installation instructions.
Checking the machine
Never switch on a damaged machine!
Inform your customer service!
Insert mains plug
With dry hands only!
Take hold of the plug only!
Turn on the tap
Dispenser II: Detergent for main wash, softener,
bleach, stain remover
Sorting and inserting the washing
Follow manufacturer’s care information!
According to the information on the care labels.
According to type; colour; soiling and temperature.
Do not exceed maximum load. a Page 7
Follow important instructions! a Page 6
Insert large and small items of washing!
Close the washing machine door. Do not jam items of washing between the
washing machine door and rubber seal.
Add detergent and care product
Dose according to:
amount of washing, soiling, water hardness (available from your water utility
company) and manufacturer’s instructions.
Pour liquid detergent into corresponding dispenser and place in drum.
Caution when opening the detergent drawer while the appliance is running!

Your washing machine

Congratulations – You have opted for a modern, high-quality
domestic appliance manufactured by Bosch. The washing machine is
distinguished by its economical consumption of water and energy.
Each appliance which leaves our factory is inspected thoroughly to
ensure that it functions properly and is in perfect condition.
Further information on our products, accessories, spare parts and
services can be found at: www.bosch-home.com or contact our
customer service centres.
Intended use

Contents Page

ʋ Intended use........................................................................................1
ʋ Programmes ........................................................................................1
ʋ Selecting and adjusting a programme ...........................................3
ʋ Washing............................................................................................3/4
ʋ After washing.......................................................................................4
ʋ Individual settings ...............................................................................5
ʋ Important information .........................................................................6
ʋ Overview of programmes..................................................................7
ʋ Safety instructions...............................................................................8
ʋ Consumption values...........................................................................8
ʋ Care.......................................................................................................9
ʋ Information about the indicator lights .............................................9
ʋ Maintenance ..................................................................................... 10
ʋ What to do if … ................................................................................. 11
Protection of the environment/Conservation tips
Utilise the maximum amount of washing for the particular
programme.
Wash normally soiled washing without prewash.
The selectable temperatures apply to the care labels on the
textiles. The temperatures in the machine may deviate from this
so that you get the optimum mix of energy-saving and washing
results.
Measure detergent according to the manufacturer’s instructions
and water hardness.
If the washing is then dried in the tumble dryer, select spin speed
according to the instructions of the dryer manufacturer.

Preparation

Before using your washing machine for the first time
wash once without any washing. aPage 9
Setting programmes
Spin speed * Programme selectorStart/
Pause
Programme selector for switching the machine
on and off and for selecting the programme.
Can be rotated in either direction.
Programmes
Detailled overview of programmes a Page 7
Spin speed can be selected individually irrespective of the
selected programme and programme progress.
L Cottons hard-wearing textiles
L Cottons ~ hard-wearing textiles
/ Mixed Load different types of washing
< Rinse/
Freshen Up
extra rinse with spin;
for hand wash, for starching
or “refreshing” washing. a Page 6
Spin washing washed by hand;
extra spin with selectable spin speed
> Drain the rinsing water when Rinse Hold
is activated (rinse stop = without final
spin)
: Wool hand/machinewashable wool
Delicates/Silk for easy-care, washable textiles
Easy-Care for easy-care textiles
Additional functions and spin speed
aIndividual settings, Page 5
$Select Start/Pause

Washing

1
2

Washing

Detergent drawers
with dispensers I, II, ~
Door handle
Dispenser ~: Fabric softener, starch
Dispenser I: Detergent for prewash
ʋ for use in the household only,
ʋ for washing machine-washable textiles and hand-
washable wool in wash liquor,
ʋ to be operated with cold drinking water and
commercially available detergents and care products
which are suitable for use in washing machines.
.
Do not leave children unattended near the
washing machine!
Children and uninstructed persons must not use
the washing machine!
Keep pets away from the washing machine!
Switch on washing machine only with base strip
attached
Dilute viscous fabric softener and fabric conditioner with water.
Prevents blockage of the overflow.

Individual settings

ʑ
Spin speed a depending on model
You can change the indicated spin speed or select Rinse Hold (rinse stop = without final spin
cycle, washing remains in the water after the last rinse cycle). Effects dependent on the
programme progress.
The maximum selectable spin speed depends on the model and the set programme.
ʑ
Additional functions a Overview of programmes, Page 7
Eco
+
Energy-optimised washing by reducing the temperature while
achieving a consistent washing result.
The washing temperature is lower than the selected temperature. For
special hygiene requirements, it is recommended that a higher
temperature be selected.
7 Prewash For heavily soiled washing. Prewash at 30 °C.
S Reduced Ironing Special spin sequence with subsequent fluffing. Gentle final spin
at reduced spin speed. Residual moisture of the washing slightly
increased.
= Aqua Plus Increased water level. Additional rinse cycle. Longer programme
duration. For areas with very soft water or for further improvement
of the rinsing result.
ʑ
$Start/Pause
For starting or interrupting the programme.
ʑ
Signal
1 step
to right
2. Set volume for ...
1. Activate setting
mode for signal
volume
set to  1 step
to right
select and
hold
+
release
... Button signals ... Information signals
set to Âset volume **set volume **
direct
** If required, select repeatedly
Blind mode *
ON–OFF
Optional:
ON–OFF
set to Â
* Long signal – function on. Short signal – function off.
1 step
to right

Important information

Before using your washing machine for the first time
Do not put any washing in the washing machine! Turn the tap on. Pour into dispenser II:
approx. 1 litre of water,
detergent (dosage according to manufacturer’s instructions for light soiling and according to
degree of water hardness).
Set programme selector to Easy-Care 60 °C and select $ Start/Pause.
At the end of the programme set the programme selector to Off.
Protecting the washing and the machine
When dosing all detergents, cleaning aids and cleaning agents, always follow
the manufacturer's instructions.
Empty pockets. Remove metal parts (paper clips, etc.).
Wash delicates in the net/bag (tights, curtains, underwired bras).
Close zips, button up covers.
Brush sand out of pockets and collars.
Remove curtain fittings or include in the net/bag.
Insert laundry
Insert large and small items of washing!
Do not jam items of washing between the washing machine door and rubber seal.
Washing with different degrees of soiling
Wash new items separately.
Light Do not prewash.
If required, pretreat stains. Select Eco
+
additional function.
Heavy Load less washing. Prewash.
If required, pretreat stains. Select Eco
+
additional function.
Soaking Load washing of the same colour.
Pour soaking agent/detergent into dispenser II according to the manufacturer’s instructions. Set
programme selector to
L Cottons 30 °C and select $ Start/Pause. After approx. 10 minutes
select $ Start/Pause to stop the programme. After the required soaking time reselect
$ Start/Pause if the programme is to be continued or change the programme.
Starching Washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch into the fabric softener
dispenser ~ according to manufacturer’s specifications (if required clean beforehand).
Dyeing/Bleaching
Dye in household quantities only. Salt may attack stainless steel! Observe specifications of the
dye manufacturer! Do not bleach washing in the washing machine!
Refreshing Programme 2 Rinse/Freshen Up.
For items of washing which were stored away or not used for a prolonged period, to remove
odours and creases which were caused by folding and storage.
Use finishing agent for a “fresh” fragrance.
Emergency release e.g. if power failure occurs
The programme continues running when the power supply is restored.
If the washing is still to be removed, the door can be opened as described below:
Risk of scalding!
Detergent solution and washing may be hot. If required, leave to
cool down.
Do not reach into the drum in case it is still rotating.
Do not open the door if you can still see water through the glass.
1. Set programme selector to Off, pull out the mains plug.
2. Removing base strip a see separate installation instructions.
3. Drain the water. aPage 10
4. Pull down emergency release with a tool and release.
Door can then be opened.
5. Attaching base strip a see separate installation instructions.
Additional
functions
3
Door
Control panel
Status
displays
Switching off
Turn the programme selector to Off.
Turn off tap
Not required for Aqua-Stop models. aInformation,
Installation Instructions
Remove the washing
Open washing machine door and remove washing.
If Rinse Hold (rinse stop = without final spin) active:
Set programme selector to > Drain or Spin.
Select $ Start/Pause.
Remove any foreign objects – risk of rusting.
Leave detergent drawer and door open so that
residual water can evaporate.
(* depending on model)
Emergency lock release
Detergent-solution pump
Drainage hose

View the manual for the Bosch 8 Logixx WIS24141 here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Bosch 8 Logixx WIS24141 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandBosch
Model8 Logixx WIS24141
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch 8 Logixx WIS24141 below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

How do I troubleshoot if the Bosch 8 Logixx WIS24141 washing machine is not starting?

To troubleshoot if the Bosch 8 Logixx WIS24141 washing machine is not starting, you can follow these steps: 1. Check if the Start/Pause button is selected. Make sure the button is pressed to start the washing machine. 2. Ensure that the door of the washing machine is closed properly. If the door is not closed, the machine will not start. 3. Verify if the detergent solution is not drained. If the Rinse Hold option is selected, the machine will not start the wash cycle. You can deselect the Rinse Hold option to allow the detergent solution to drain. 4. Clean the drain pump. If the drain pump is clogged, it can prevent the machine from starting. Refer to page 10 of the manual for instructions on how to clean the drain pump. 5. Check the outlet pipe and drainage hose for any blockages. If these are blocked, it can hinder the water flow and prevent the machine from starting. Clean the outlet pipe and drainage hose if necessary. By following these troubleshooting steps, you should be able to resolve the issue of the Bosch 8 Logixx WIS24141 washing machine not starting.

What should I do if the selected programme on the Bosch 8 Logixx WIS24141 washing machine is not working properly?

If the selected programme on the Bosch 8 Logixx WIS24141 washing machine is not working properly, you can try the following steps to troubleshoot the issue: 1. Check if you have mistakenly selected the wrong programme. Reselect the programme and press the Start/Pause button to start the new programme from the beginning. 2. Ensure that the washing machine is properly installed according to the separate installation instructions. Make sure the machine is not damaged and inform customer service if needed. 3. Verify that the door of the washing machine is closed properly. If the door is not closed, the programme may not start. Close the door securely. 4. Check if the detergent and care products are added correctly. Follow the manufacturer's instructions for dosing the detergent based on the amount of washing, soiling, and water hardness. Pour liquid detergent into the corresponding dispenser and place it in the drum. 5. Make sure you are not exceeding the maximum load capacity of the washing machine. Overloading the machine can affect the performance of the selected programme. Remove any excess laundry if necessary. By following these troubleshooting steps, you should be able to address the issue of the selected programme not working properly on the Bosch 8 Logixx WIS24141 washing machine.

How can I troubleshoot if the Bosch 8 Logixx WIS24141 washing machine is not spinning the clothes properly?

To troubleshoot if the Bosch 8 Logixx WIS24141 washing machine is not spinning the clothes properly, you can follow these steps: 1. Check if the load is unbalanced. Unevenly distributed laundry can cause the machine to not spin properly. Rearrange the clothes in the drum to ensure a balanced load. 2. Verify if the spin speed is set correctly. Make sure you have selected the appropriate spin speed for the type of fabric and the level of moisture you want to achieve. Refer to the programme settings in the manual for guidance. 3. Ensure that the drain pump and outlet pipe are not clogged. A blocked drain pump or outlet pipe can prevent the water from being expelled during the spin cycle. Clean the drain pump and check the outlet pipe for any obstructions. 4. Check if the machine is level. An unlevelled machine can cause excessive vibrations during the spin cycle. Adjust the feet of the washing machine to ensure it is stable and level on the floor. 5. If the issue persists, it is recommended to contact customer service for further assistance. They will be able to provide specific troubleshooting steps or arrange for a technician to inspect the machine if necessary. By following these troubleshooting steps, you should be able to address the issue of the Bosch 8 Logixx WIS24141 washing machine not spinning the clothes properly.

What should I do if the Bosch 8 Logixx WIS24141 washing machine is not draining the water after the wash cycle?

To troubleshoot if the Bosch 8 Logixx WIS24141 washing machine is not draining the water after the wash cycle, you can follow these steps: 1. Check if the drainage hose is properly connected and not kinked or blocked. Ensure that the hose is securely attached to the machine and that there are no obstructions in the hose. 2. Clean the drain pump and filter. The drain pump and filter may be clogged with debris, preventing proper drainage. Refer to page 10 of the manual for instructions on how to clean the drain pump and filter. 3. Verify if the outlet pipe is clear. Make sure that the outlet pipe is not blocked or restricted, as this can impede the flow of water. Clean the outlet pipe if necessary. 4. Check if the selected programme includes a Rinse Hold option. If the Rinse Hold option is selected, the machine will not drain the water after the wash cycle. Deselect the Rinse Hold option to allow the water to drain. 5. If the issue persists, it is recommended to contact customer service for further assistance. They will be able to provide specific troubleshooting steps or arrange for a technician to inspect the machine if necessary. By following these troubleshooting steps, you should be able to address the issue of the Bosch 8 Logixx WIS24141 washing machine not draining the water after the wash cycle.

How do I troubleshoot if the clothes in the Bosch 8 Logixx WIS24141 washing machine are not getting cleaned properly?

To troubleshoot if the clothes in the Bosch 8 Logixx WIS24141 washing machine are not getting cleaned properly, you can follow these steps: 1. Check if you have selected the appropriate programme for the type of fabric and level of soiling. Refer to the programme settings in the manual for guidance on selecting the right programme. 2. Ensure that you are not overloading the machine. Overloading can prevent proper agitation and rinsing, resulting in ineffective cleaning. Remove any excess laundry if necessary. 3. Verify if you are using the correct amount and type of detergent. Follow the manufacturer's instructions for dosing the detergent based on the load size, soiling level, and water hardness. Use a suitable detergent for the type of fabric being washed. 4. Check if the water temperature is set correctly. Different fabrics require different water temperatures for optimal cleaning. Adjust the temperature setting according to the fabric care instructions. 5. Clean the drum and detergent dispenser regularly. Accumulated dirt and detergent residue can affect the cleaning performance. Refer to the cleaning instructions in the manual for guidance on cleaning the drum and detergent dispenser. By following these troubleshooting steps, you should be able to improve the cleaning performance of the Bosch 8 Logixx WIS24141 washing machine.

Is the manual of the Bosch 8 Logixx WIS24141 available in English?

Yes, the manual of the Bosch 8 Logixx WIS24141 is available in English .

Is your question not listed? Ask your question here

No results