Bosch 8 Logixx WAS32464 manual

Bosch 8 Logixx WAS32464
8.5 · 59
PDF manual
 · 10 pages
English
manualBosch 8 Logixx WAS32464
1

Safety instructions

The washing machine is heavy - take care when lifting.
Caution: frozen hoses can crack/burst. Do not install the washing machine outdoors or
in areas exposed to frost.
The washing machine could be damaged. Do not lift the appliance by protruding
components (e.g. the washing machine door).
In addition to the instructions provided in this document, special regulations from the
relevant water and electric utility companies may apply.
If in doubt, have a technician connect the appliance.
Route hoses and cables in such a way that there is no risk of tripping.

Environmentally-friendly disposal

Dispose of packaging in an environmentally friendly manner.
This appliance is labelled in accordance with European Directive 2002/96/EC on
Waste Electrical and Electronic Equipment - WEEE.
The directive provides an EU-wide framework for the return and recycling of used
appliances.

Installation surface

The machine must be stable so that it does not move around.
The surface on which it is installed must be firm and level.
Soft floors/floor coverings are not suitable.
Installation on a pedestal
The feet of the washing machine must be secured with holding brackets *.
* Order no. WMZ 2200, WX 9756, CZ 110600, Z 7080X0
Installation on a wood joist floor
If possible, place the washing machine in a corner.
Screw a water-resistant wooden board (min. 30 mm thick) to the floor.
The feet of the washing machine must be secured with holding brackets *.
* See above for order no.

Installing the appliance depending on model

Install the appliance before connecting it to the power supply.
Risk of electric shock.
For models with a continuous appliance covering plate or a square service flap, the
appliance covering plate can be replaced by a metal cover.
Instead of the appliance covering plate, you must have a metal cover * fitted by an expert.
* Order no. WMZ 2043, WZ 20430
For models with a non-continuous appliance covering plate or a round service flap, the
appliance covering plate must not be removed.
Only install the washing machine underneath a continuous worktop that is securely
connected to adjacent cabinets.
Recess width of 60 cm required.
2

Scope of delivery depending on model

Also required, depending on the connection:
1 hose clamp Ø 24-40 mm (specialist retailers) to connect to a siphon
a Page 4; water connection
Useful tools
Spirit level for levelling.
Spanner with
WAF13: for loosening the transport safety devices a Page 3 and
WAF17: for aligning the appliance feet a Page 5.

Hose and cable lengths depending on model

Left-hand connection
or
Right-hand connection
Note: Using hose clips limits the possible hose lengths.
Available from specialist retailers/the after-sales service:
Extension for AquaäStop and cold water inlet hose (approx. 2.50 m).
Order no. WMZ2380, WZ10130, CZ11350, Z7070X0
Longer inlet hose (approx. 2.20 m) for standard model.
Spanner
Mains cable
Water inlet
Elbow
for fixing the drainage
hose in place
Covers
with hose clip
AquaäStop AquaäSecure/Standard
Water outlet
~
140 cm
~
95 cm
~
120 cm
~
130 cm
~
100 cm
~
135 cm
0 - max. 100 cm
Moisture inside the drum is
due to final testing.
3

Removing the transport safety devices

Before using the appliance for the first time, the 4 transport safety
devices must be completely removed and kept safe.
If you need to transport the appliance at a later date, always refit the
transport safety devices to prevent damage to the machine.
a Page 6.
Store the screw and sleeve screwed together.
1. Take the hoses (depending on model) out of the holders and the elbow.
Remove the elbow.
2. Unscrew and remove the bolts from all 4 transport safety devices.
3. Take the mains cable out of the holder. Remove the sleeves.
4. Insert the covers. Secure tightly by pressing on the snap-in hook. Insert the hose clip.
5. Secure the hoses in the hose clips.
4

Water connection depending on model

Risk of electric shock. Do not immerse the Aqua-Stop safety device in water
(contains an electric valve).
To prevent leaks or water damage, observe the instructions in this section.
Caution: only operate the washing machine using cold drinking water.
Do not connect to the mixer tap of an unpressurised hot-water boiler.
Do not use a used inlet hose. Only use the inlet hose supplied or one which was
purchased from an authorised specialist retailer.
If in doubt, have a technician connect the appliance.
Water inlet
Water inlet hose:
Caution: do not kink, squash, modify or cut through
(otherwise its strength is no longer guaranteed).
Optimum water pressure in the supply network: 100-1000 kPa (1-10 bar)
When the tap is on, the water flow is at least 8 l/min.
If the water pressure is higher than this, a pressure reducing valve must be installed.
Model: AquaäStop
AquaäSecure
Standard
1. Connect the water inlet hose to the tap.
Caution: only tighten the screw connections by
hand.
2. Open the water tap carefully, checking the leak
tightness of the connection points.
Caution: the screw connection is under mains
water pressure.
Water outlet
Water outlet hose:
Caution: do not kink or pull lengthways.
Height difference between the installation surface and the drain:
0 - max. 100 cm
Outlet into a sink
Caution: secure the drain hose so that it cannot slip out.
Caution: the plug must not block drainage from the sink. During pumping,
check whether the water is draining away quickly enough. The end of the
drain hose must not be immersed in the water that is pumped out! This
would result in the risk of water being sucked back into the washing
machine!
Drainage into a siphon:
Caution: the connection point must be secured with a hose clamp,
Ø 24-40 mm (specialist retailers).
.
Outlet into a plastic pipe with rubber bushing or into a drainage pit:
Caution: secure the drain hose so that it cannot slip out.
max.
90°
max.
90°
min.
10 mm
min.
10 mm
3/4
3/4

View the manual for the Bosch 8 Logixx WAS32464 here, for free. This manual comes under the category washing machines and has been rated by 59 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Bosch 8 Logixx WAS32464 or do you need help? Ask your question here

Need help?

Do you have a question about the Bosch and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 32
L
Lena nilsson August 17, 2021

I have a Bosch Logixx 8 which has been perfect. It is a few years old. It has stopped in a program mix and now the display shows E:23 blinking. It occasionally beeps 2 times followed by 3 beeps. I have managed to empty it, but now it is continuously pumping out and beeping no matter which program I choose. It is not possible to open it.

I have a Bosch Logixx 8 which has been perfect. It is a few years old. It has stopped in a program mix and now the display sh...
zoom-in
View photo
This message has been automatically translated
S
Stina August 2, 2021

I can't open the door, the machine got locked and the handle came off in my hand. What do I do?!

I can't open the door, the machine got locked and the handle came off in my hand. What do I do?!
zoom-in
View photo
This message has been automatically translated
J
Johanna IlmanderFebruary 7, 2021

A child lock is installed on my Bosch washing machine Logixx 8, I cannot open it. What should I do? Regards, Johanna

This message has been automatically translated
S
Sandra March 21, 2021

Hello. My Bosch (about 10 years) suddenly cannot be started. I ran a cycle and suddenly it stopped. The start button does not light up, but the display does. "Beeping sound". I replaced the door lock about 2 years ago. No error code, no blown fuses in the house, and I have tried unplugging it. Any good tips?

Hello. My Bosch (about 10 years) suddenly cannot be started. I ran a cycle and suddenly it stopped. The start button does not...
zoom-in
View photo
This message has been automatically translated
S
SipalFebruary 25, 2021

Bosch Logixx 8 VarioPerfect. It is not possible to change the program when it is 2.30 to 30 or 40 or 50. How can I proceed to solve the problem?

This message has been automatically translated
B
BirgithNovember 24, 2019

I am getting error code E:80 and the door cannot be opened. I have emptied the water, unplugged it, tried again, but I can’t figure out what to do. Does anyone have any suggestions for a solution?

This message has been automatically translated
S
SivDecember 11, 2020

"I could not open the door. I managed to break the handle. I pulled too hard. How do I open the door?"

This message has been automatically translated
K
KutteDecember 20, 2015

The door cannot be opened after the program has run. It seems like the lock is not "releasing", the handle that is pulled feels a bit loose, how can it be opened in an alternative way? Is it possible to remove the handle itself to possibly access the locking mechanism?

This message has been automatically translated
C
Charlotte LundeMay 9, 2021

How do I open the door? The washing is finished, but the door cannot be opened.

This message has been automatically translated

General
BrandBosch
Model8 Logixx WAS32464 | WAS32464SN
Productwashing machine
EAN4242002651057
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)
Power
A+++
Energy consumption washing per cycle- kWh
Power consumption (typical)2300 W
Current10 A
Water consumption per cycle- L
Other features
Power requirements220 - 240V, 50Hz
Annual energy consumption washing189 kWh
Washing classA
Dimensions (WxDxH)600 x 590 x 842 mm
Design
Built-in displayYes
Display typeLED
Loading typeFront-load
Appliance placementFreestanding
Cord length1.75 m
Door hingeLeft
Door opening angle165 °
Drum volume65 L
Product colorWhite
Door colorSilver
Performance
Spin-drying classA
Number of washing programs-
Drum capacity8 kg
Maximum spin speed1600 RPM
TimerYes
Noise level (wash)49 dB
AquaStop functionYes
Delayed start timerYes
Foam control systemYes
Load balancing systemYes
Delay start (max)24 h
Noise level (spin)74 dB
Hygiene/anti-allergy, Black
Ergonomics
Child lockYes
Weight & dimensions
Weight79000 g
Width600 mm
Depth590 mm
Height842 mm
Door opening diameter320 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bosch 8 Logixx WAS32464 below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

What is the weight of the Bosch 8 Logixx WAS32464?

The Bosch 8 Logixx WAS32464 has a weight of 79000 g.

What is the height of the Bosch 8 Logixx WAS32464?

The Bosch 8 Logixx WAS32464 has a height of 842 mm.

What is the width of the Bosch 8 Logixx WAS32464?

The Bosch 8 Logixx WAS32464 has a width of 600 mm.

What is the depth of the Bosch 8 Logixx WAS32464?

The Bosch 8 Logixx WAS32464 has a depth of 590 mm.

Why is my washing machine not turning on?

Check if the power cord is properly plugged into the socket and if there is electricity supply. It's important to ensure the circuit breaker is not tripped.

Why is my laundry still wet after the wash cycle?

Verify if you have appropriately selected the spin speed for your load. Higher spin speeds extract more water. Additionally, check if you have overloaded the machine, as this can affect the washing and spinning performance.

How can I remove unpleasant odors from my washing machine?

Periodically run a maintenance cycle with a washing machine cleaner. It helps to eliminate any residues and odors that might have built up over time. Also, remember to keep the door or lid slightly open after each use to let the drum dry and prevent mold or mildew growth.

What should I do if the machine displays an error code?

Take note of the error code shown on the display and try to troubleshoot the issue. For instance, error code E18 indicates a drain pump issue, while E04 might refer to a door lock problem. Check the corresponding sections of the manual to find potential solutions.

How can I ensure the washing machine operates efficiently?

Regularly clean the detergent dispenser drawer and remove any lint or debris from the lint filter. Avoid using excessive amounts of detergent, as it can lead to poor washing results and potentially clog the machine. Also, ensure the water supply hose is not kinked or blocked to maintain a good flow.

Does the Bosch 8 Logixx WAS32464 have a built-in display?

Yes, the Bosch 8 Logixx WAS32464 has a built-in display.

What is the annual energy consumption for washing with the Bosch 8 Logixx WAS32464?

The annual energy consumption for washing with the Bosch 8 Logixx WAS32464 is 189 kWh.

Does the Bosch 8 Logixx WAS32464 have a child lock feature?

Yes, the Bosch 8 Logixx WAS32464 has a child lock feature.

What is the maximum spin speed of the Bosch 8 Logixx WAS32464?

The maximum spin speed of the Bosch 8 Logixx WAS32464 is 1600 RPM.

How loud is the washing process with the Bosch 8 Logixx WAS32464?

The noise level during washing with the Bosch 8 Logixx WAS32464 is 49 dB.

Is the manual of the Bosch 8 Logixx WAS32464 available in English?

Yes, the manual of the Bosch 8 Logixx WAS32464 is available in English .

Is your question not listed? Ask your question here

No results