Boneco U7137 manual

Boneco U7137
7.2 · 1
PDF manual
 · 84 pages
English
manualBoneco U7137
RZ_BD_Ultrasonic 7137/38.indd 18.7.2005, 10:48 Uhr2

Manual

View the manual for the Boneco U7137 here, for free. This manual comes under the category humidifiers and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Boneco U7137 or do you need help? Ask your question here

Need help?

Do you have a question about the Boneco and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Boneco U7137 specifications

Below you will find the product specifications and the manual specifications of the Boneco U7137.

General
BrandBoneco
ModelU7137 | U7137
Producthumidifier
EAN7611408010848
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Water tank capacity5 L
Suitable for room volume up to150 m³
Humidity output up to400 g/h
Noise level25 dB
Other features
HumidistatYes
Design
Product colorWhite
Weight & dimensions
Weight3700 g
Dimensions (WxDxH)170 x 320 x 320 mm
Power
Power40 W
Power supply input frequency50 - 50 Hz
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Boneco U7137 below.

What is the weight of the Boneco U7137?

The Boneco U7137 has a weight of 3700 g.

Does the Boneco U7137 have a water tank capacity of 5 L?

Yes, the Boneco U7137 has a water tank capacity of 5 L. This means that it can hold a large amount of water, allowing for longer periods of use without needing to refill.

Does the Boneco U7137 have a humidistat?

Yes, the Boneco U7137 has a humidistat. This feature allows the user to set and maintain the desired humidity level, providing optimal comfort and convenience.

Is the Boneco U7137 suitable for room volumes up to 150 m³?

Yes, the Boneco U7137 is suitable for room volumes up to 150 m³. This indicates that it is designed to effectively humidify larger spaces, making it suitable for living rooms, bedrooms, or even small offices.

What is the humidity output of the Boneco U7137?

The Boneco U7137 has a humidity output of up to 400 g/h. This high output ensures fast and efficient humidification, creating a more comfortable indoor environment.

What is the noise level of the Boneco U7137?

The Boneco U7137 has a noise level of 25 dB. This is considered to be very low, allowing for quiet operation without causing any disruptions or disturbances, especially during nighttime use.

How do I know if the Boneco U7137 humidifier is operating correctly?

To determine if the Boneco U7137 humidifier is operating correctly, follow these steps: 1. Check the power supply: Ensure that the humidifier is plugged into a functioning power outlet and that the power cord is securely connected. 2. Verify the water level: Check the water tank to ensure it is filled with clean, cold water from the tap. Make sure the water level is above the minimum level indicated. If the water tank is empty, the red light indicator will turn on. 3. Switch on the humidifier: Use the on/off switch to turn on the humidifier. The green light indicator should illuminate, indicating that the humidifier is operating. 4. Observe mist production: After the humidifier is turned on, observe if it is producing a visible mist. The mist should be released from the vapor outlet. If there is no mist, ensure that the water tank is properly inserted and that the water level is sufficient. 5. Monitor humidity levels: The Boneco U7137 humidifier is designed to automatically control the humidity level according to the desired setting. Monitor the humidity levels in the room to ensure they are within the recommended range of 40-60%. By following these steps, you can determine if the Boneco U7137 humidifier is operating correctly.

What should I do if the Boneco U7137 humidifier is not producing any mist?

If the Boneco U7137 humidifier is not producing any mist, you can try the following steps to troubleshoot the issue: 1. Check the water level: Ensure that the water tank is filled with clean, cold water from the tap. Make sure the water level is above the minimum level indicated. If the water tank is empty, the humidifier will not produce mist. 2. Verify proper assembly: Ensure that all parts of the humidifier, including the water tank and vapor outlet, are securely assembled. If any part is not properly inserted or connected, it may prevent mist production. 3. Clean the nebulizer: Over time, mineral deposits or impurities in the water can accumulate on the nebulizer, affecting mist production. Follow the cleaning instructions in the manual to clean the nebulizer and remove any buildup. 4. Check for clogs: Inspect the vapor outlet for any clogs or blockages. Use a soft brush or cloth to gently clean the vapor outlet and remove any obstructions that may be hindering mist production. 5. Ensure proper operation: Make sure the humidifier is switched on using the on/off switch. Check the indicator lights - a green light indicates normal operation, while a red light indicates an empty water tank. By following these steps, you can troubleshoot the issue of the Boneco U7137 humidifier not producing mist.

How can I ensure the safety of children around the Boneco U7137 humidifier?

To ensure the safety of children around the Boneco U7137 humidifier, follow these steps: 1. Read the safety instructions: Familiarize yourself with the safety instructions provided in the manual. These instructions highlight potential hazards and precautions to take when using the humidifier. 2. Supervise children: Always supervise children when they are near the humidifier. Children may not recognize the hazards associated with electrical appliances, so it is important to ensure their safety. 3. Keep children away from the humidifier: Prevent children from touching or tampering with the humidifier. Make sure they understand that the humidifier is not a toy and should not be played with. 4. Proper operation: Only allow adults or responsible individuals who are familiar with the operating instructions to operate the humidifier. Children and individuals under the influence of medication, alcohol, or drugs should not operate the appliance. 5. Safe placement: Place the humidifier on a dry, level surface where it is not easily knocked over by children. Avoid placing it directly on the floor or next to heating sources to prevent damage to the flooring and potential accidents. By following these steps, you can ensure the safety of children around the Boneco U7137 humidifier.

What should I do if the water tank of the Boneco U7137 humidifier is leaking?

If the water tank of the Boneco U7137 humidifier is leaking, you can take the following steps to address the issue: 1. Turn off and unplug the humidifier: Before addressing the leaking water tank, ensure that the humidifier is turned off and unplugged from the power source to prevent any electrical hazards. 2. Check for any visible damage: Inspect the water tank for any cracks, holes, or damage that may be causing the leakage. If you identify any visible damage, it may be necessary to replace the water tank. 3. Clean and dry the tank: Empty the water tank and clean it thoroughly with mild soap and water. Rinse it well to remove any residue or impurities. Ensure that the tank is completely dry before reassembling it. 4. Verify proper assembly: Ensure that the water tank is properly inserted and securely closed. Check that the tank cap is tightly sealed to prevent any water from leaking out. 5. Monitor for leaks: After reassembling the water tank, place it back onto the humidifier base and monitor it closely for any signs of leakage. If the leaking persists, it is recommended to contact the manufacturer or authorized service center for further assistance. By following these steps, you can address the issue of a leaking water tank in the Boneco U7137 humidifier.

Can I use fragrances or essential oils in the water tank of the Boneco U7137 humidifier?

No, you should not use fragrances or essential oils in the water tank of the Boneco U7137 humidifier. The manual specifically states that water additives, such as fragrances, essential oils, and water fresheners, should not be used. Even a small amount of these additives can cause cracks in the tank material, which can damage the humidifier and void the manufacturer's warranty. The material of the tank is not designed for the use of such additives. Therefore, it is recommended to only use clean, cold water from the tap to fill the water tank of the Boneco U7137 humidifier. By following this guideline, you can ensure the proper functioning and longevity of the humidifier.

How do I know if the Boneco U7137 humidifier is operating safely?

To ensure that the Boneco U7137 humidifier is operating safely, follow these steps: 1. Read the operating instructions carefully before using the humidifier and keep them for future reference. 2. Connect the unit only to alternating current with the voltage specified on the rating label. 3. Use the humidifier indoors and within the specified technical data. Using it for a purpose for which it is not intended could pose serious dangers to health and life. 4. Always supervise children when they are near the humidifier, as they may not recognize the hazards associated with electrical appliances. 5. Do not use the humidifier if there is any damage to the appliance or cable, after a malfunction, after the appliance has been dropped, or if it has been damaged in any other way. 6. Only operate the humidifier when it is completely assembled. 7. Disconnect the appliance from the mains power before filling/emptying the water tank, cleaning/maintenance, assembling/dismantling of individual parts, and before moving the appliance. 8. Place the humidifier on a dry, level surface and avoid placing it directly on the floor or next to heating sources. 9. Do not pour water into the vapor outlet of the evaporator. 10. Do not use any additives such as fragrances, essential oils, or water fresheners in the water tank, as they can damage the tank material and void the manufacturer's warranty. By following these safety instructions, you can ensure the safe operation of the Boneco U7137 humidifier.

What should I do if the Boneco U7137 humidifier is not producing enough mist?

If the Boneco U7137 humidifier is not producing enough mist, you can try the following steps to troubleshoot the issue: 1. Check if the power cable is properly plugged in. Ensure that the humidifier is receiving power. 2. Verify that there is enough water in the tank. If the empty light is flashing, it indicates that the tank is empty. Fill the tank with water. 3. Increase the desired humidity level setting. If the desired humidity level is lower than the actual humidity level, the humidifier may not produce enough mist. Adjust the setting accordingly. 4. Rinse the humidifier with clear water to remove any residues of washing-up liquid that may be affecting the mist output. 5. Set the vapour output to the maximum setting. After 10 minutes, the humidifier should start working properly again if the water temperature was too low. 6. Clean the membrane to remove any mineral deposits that may be obstructing the mist output. 7. If you notice white dust around the humidifier, it may indicate that the demineralization cartridge is exhausted. Replace the demineralization cartridge or resin. By following these troubleshooting steps, you should be able to resolve the issue of the Boneco U7137 humidifier not producing enough mist.

How do I fill the water tank of the Boneco U7137 humidifier correctly?

To fill the water tank of the Boneco U7137 humidifier correctly, follow these steps: 1. Always unplug the unit before removing the water tank to ensure safety. 2. Check for any foreign objects in the water tank and remove them if present. 3. Take off the water tank cap to access the tank for filling. 4. Fill the tank with clean, cold water from the tap. Ensure that the water is clean to prevent any impurities from affecting the humidifier's performance. 5. Close the cap of the water tank securely to prevent any leakage. 6. Place the filled water tank on the base of the humidifier. 7. Insert the vapour outlet into the designated slot on the water tank. 8. After ensuring that the tank is securely in place, insert the plug of the humidifier into a socket. 9. Switch on the appliance using the on/off switch. 10. The green light should come on, indicating that the humidifier is operating correctly. By following these steps, you can fill the water tank of the Boneco U7137 humidifier correctly and ensure its proper functioning.

What should I do if the Boneco U7137 humidifier is not turning on?

If the Boneco U7137 humidifier is not turning on, you can try the following steps to troubleshoot the issue: 1. Check if the power cable is properly plugged into the socket and the humidifier. 2. Ensure that the socket is receiving power by testing it with another device. 3. Verify that the water tank is properly filled and securely placed on the base of the humidifier. 4. Make sure that the water tank cap is closed tightly to ensure proper contact with the humidifier. 5. Check if the humidifier is set to the "on" position using the on/off switch. 6. If the humidifier has a timer function, ensure that it is not set to turn off automatically. 7. Check if the water level in the tank is below the minimum level. If so, refill the tank with clean, cold water. 8. If the humidifier has a pre-heating function, make sure it is turned on if necessary. 9. If none of the above steps resolve the issue, contact customer support for further assistance. By following these troubleshooting steps, you should be able to identify and resolve the issue of the Boneco U7137 humidifier not turning on.

Can I use fragrances or essential oils in the water tank of the Boneco U7137 humidifier?

No, you should not use fragrances or essential oils in the water tank of the Boneco U7137 humidifier. The manual specifically states that water additives, such as fragrances, essential oils, and water fresheners, must not be used. Even a small amount of these additives can cause cracks in the tank material, which can damage the tank and the entire unit. Using such additives will also void the manufacturer's warranty. It is important to follow the manufacturer's instructions and recommendations to ensure the proper functioning and longevity of the humidifier. Instead of using fragrances or essential oils in the water tank, you can focus on maintaining a clean and hygienic environment by regularly cleaning and maintaining the humidifier according to the instructions provided in the manual. By adhering to these guidelines, you can ensure the safe and effective operation of the Boneco U7137 humidifier.

How do I know if the Boneco U7137 humidifier is suitable for my room size?

To determine if the Boneco U7137 humidifier is suitable for your room size, follow these steps: 1. Consider the recommended relative humidity level: A comfortable atmosphere indoors is typically achieved with a relative humidity level between 40% and 60%. 2. Assess the size of your room: Measure the dimensions of your room, including the length, width, and height. 3. Calculate the volume of your room: Multiply the length, width, and height of your room to determine the volume in cubic meters. 4. Check the humidifier's coverage area: Refer to the product specifications or user manual to find the coverage area of the Boneco U7137 humidifier. This information will indicate the maximum room size that the humidifier can effectively humidify. 5. Compare the coverage area with your room size: If the coverage area of the humidifier is equal to or larger than the volume of your room, then the Boneco U7137 humidifier is suitable for your room size. Remember to consider other factors such as insulation, air circulation, and the presence of open doors or windows, as they can affect the overall humidity level in your room.

Why is the water tank of the Boneco U7137 humidifier not filling up completely?

There could be several reasons why the water tank of the Boneco U7137 humidifier is not filling up completely. Here are some possible causes and solutions: 1. Check for foreign objects: Make sure there are no foreign objects obstructing the water tank or its opening. Remove any debris or blockages that may be preventing the tank from filling properly. 2. Ensure proper tank placement: Ensure that the water tank is securely placed on the base of the humidifier. If the tank is not properly aligned or seated, it may not fill up completely. Adjust the tank position if necessary. 3. Verify water source: Ensure that you are using clean, cold water from the tap to fill the tank. Avoid using hot or warm water, as it may affect the functioning of the humidifier. 4. Check for water level sensor issues: The humidifier is equipped with a water level sensor that automatically shuts off the nebulizer function when the water reaches the minimum level. If the sensor is malfunctioning, it may prevent the tank from filling up completely. Contact customer support for further assistance. 5. Avoid using water additives: Do not add any conditioners, fragrances, essential oils, or other water additives to the tank. These substances can cause cracks in the tank material and affect its functionality. If the issue persists after following these steps, it is recommended to consult the user manual or contact customer support for further troubleshooting assistance.

What should I do if the Boneco U7137 humidifier is not turning on?

If the Boneco U7137 humidifier is not turning on, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the humidifier is properly plugged into a functioning power outlet. Verify that the power cord is securely connected to both the humidifier and the outlet. 2. Check the power switch: Make sure that the power switch on the humidifier is in the "on" position. If it is already in the "on" position, try toggling it off and on again to reset the device. 3. Verify the water level: Check the water level in the tank. If the water level is below the minimum level, the humidifier may not turn on. Refill the tank with clean, cold water from the tap, ensuring that the water level reaches the minimum level. 4. Clean the humidifier: If the humidifier is dirty or clogged, it may not turn on. Follow the cleaning instructions in the manual to clean the humidifier, including removing any mineral deposits or debris that may be obstructing the device. 5. Contact customer support: If the humidifier still does not turn on after following these steps, it is recommended to contact customer support for further assistance and troubleshooting. Please note that these steps are general guidelines and may vary depending on the specific model of the Boneco U7137 humidifier.

How do I clean the water tank of the Boneco U7137 humidifier?

To clean the water tank of the Boneco U7137 humidifier, follow these steps: 1. Unplug the humidifier: Before cleaning the water tank, make sure to unplug the humidifier from the power source to ensure safety. 2. Remove the water tank: Take off the water tank cap to access the tank. Carefully lift the water tank from the base of the humidifier. 3. Empty any remaining water: Pour out any remaining water from the tank into a sink or drain. Rinse the tank with clean, cold water to remove any residue or impurities. 4. Clean the tank: Use a soft brush or cloth to clean the inside of the tank. You can also use a mild detergent or vinegar solution to remove stubborn stains or mineral deposits. Rinse the tank thoroughly with clean water to remove any cleaning solution. 5. Dry the tank: After cleaning, ensure that the tank is completely dry before reassembling it. You can air dry the tank or use a clean towel to dry it manually. 6. Reassemble the humidifier: Once the tank is dry, securely place it back on the base of the humidifier. Make sure the tank is properly aligned and the cap is closed tightly. By following these steps, you can effectively clean the water tank of the Boneco U7137 humidifier and maintain its performance.

Why is the Boneco U7137 humidifier not producing enough mist?

If the Boneco U7137 humidifier is not producing enough mist, you can try the following steps to troubleshoot the issue: 1. Check the water level: Ensure that the water tank is filled to the recommended level. If the water level is too low, the humidifier may not be able to produce enough mist. Refill the tank with clean, cold water from the tap. 2. Clean the nebulizer: The nebulizer is responsible for creating the mist. Over time, it can become clogged with mineral deposits or debris, affecting its performance. Follow the cleaning instructions in the manual to clean the nebulizer and remove any obstructions. 3. Adjust the mist output: Check the mist output settings on the humidifier. If it is set to a low or medium level, increase the mist output to a higher setting. This will allow the humidifier to produce more mist. 4. Check the room temperature: The temperature of the room can affect the humidifier's mist production. If the room is too cold, the mist may not be as visible. Increase the room temperature slightly to see if it improves the mist output. 5. Replace the filter: If your humidifier has a replaceable filter, check if it needs to be replaced. A clogged or dirty filter can restrict the airflow and reduce mist production. Follow the instructions in the manual to replace the filter if necessary. By following these steps, you can address common issues that may be causing the Boneco U7137 humidifier to not produce enough mist.

Is the manual of the Boneco U7137 available in English?

Yes, the manual of the Boneco U7137 is available in English .

Is your question not listed? Ask your question here

No results