BMW X1 sDrive28i (2015) manual

BMW X1 sDrive28i (2015)
7.8 · 1
PDF manual
 · 297 pages
English
manualBMW X1 sDrive28i (2015)

Seat position and height

Before installing a child restraint fixing system,
move the front passenger seat as far back as
possible and adjust its height to the highest
position to obtain the best possible position for
the belt and to offer optimal protection in the
event of an accident.
Do not change the seat position and height af‐
ter this.

Backrest width

Before mounting a child restraint fixing system
on the front passenger seat, open the backrest
width, refer to page 48, completely. Do not
change the backrest width after this.
Backrest width for the child seat
Before installing a child restraint fixing
system in the front passenger seat, the back‐
rest width must be opened completely. Do not
change the adjustment after this; otherwise,
the stability of the child seat will be reduced.◀

Child seat security

The rear safety belts and the safety belt for the
front passenger can be locked to prevent ex‐
tension in order to permit attachment of child
restraint fixing systems.

Locking the safety belt

1.
Pull out the belt webbing completely.
2. Secure the child restraint fixing system
with the belt.
3. Allow the belt webbing to be pulled in and
pull it taut against the child restraint fixing
system. The safety belt is locked.

Unlocking the safety belt

1. Open the belt buckle.
2. Remove the child restraint fixing system.
3. Allow the belt webbing to be pulled in com‐
pletely.

LATCH child restraint fixing

system

LATCH: Lower Anchors and Tether for Chil‐
dren.
Note
Manufacturer's information for LATCH
child restraint fixing systems
To mount and use the LATCH child restraint
fixing systems, observe the operating and
safety information from the system manufac‐
turer; otherwise, the level of protection may be
reduced.◀

Mounts for the lower LATCH anchors

The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child
is restrained by the internal harnesses.
Correctly engage the lower LATCH an‐
chors
Make sure that the lower LATCH anchors have
properly engaged and that the child restraint
fixing system is resting snugly against the
backrest; otherwise, the degree of protection
offered may be reduced.◀
Seite 55
Transporting children safely Controls
55
Online Edition for Part no. 01 40 2 954 052 - II/15

Manual

View the manual for the BMW X1 sDrive28i (2015) here, for free. This manual comes under the category cars and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the BMW X1 sDrive28i (2015) or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BMW and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BMW X1 sDrive28i (2015) specifications

Below you will find the product specifications and the manual specifications of the BMW X1 sDrive28i (2015).

General
BrandBMW
ModelX1 sDrive28i (2015)
Productcar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BMW X1 sDrive28i (2015) below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

Where can I find the VIN number of my BMW?

The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the BMW X1 sDrive28i (2015)for the exact location of the VIN number.

What is a VIN number?

The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.

When does my BMW need maintenance?

Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.

When should I change the brake fluid of my BMW?

It is recommended to change the brake fluid every two years.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

One or more doors won't open from the inside. Now what?

The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How should I secure cargo in the BMW X1 sDrive28i (2015) to ensure safety during braking and avoidance maneuvers?

To secure cargo in the BMW X1 sDrive28i (2015) for safety during braking and avoidance maneuvers, follow these steps: 1. Stow heavy cargo as far forward and as low as possible, ideally behind the backrests. 2. Cover sharp edges and corners of the cargo to prevent injuries. 3. Avoid piling cargo higher than the top edge of the backrests. 4. If needed, fold down the rear backrests to accommodate cargo. 5. Use the partition net to protect passengers and ensure objects cannot penetrate it. 6. Place protective material around sharp or pointed objects that could bump against the rear window. 7. Secure smaller and lighter items with retaining straps, a cargo net, or draw straps. 8. Secure larger and heavy objects with cargo straps attached to lashing eyes in the cargo area. 9. Never stow heavy and hard objects in the passenger compartment without securing them to prevent dangers during braking and avoidance maneuvers. 10. Ensure not to exceed approved vehicle weight limits to maintain safety and comply with traffic laws.

What precautions should I take to prevent exceeding the approved gross vehicle weight or approved axle loads in the BMW X1 sDrive28i (2015)?

To prevent exceeding the approved gross vehicle weight or approved axle loads in the BMW X1 sDrive28i (2015), follow these precautions: 1. Avoid overloading the vehicle to prevent overheating and tire damage. 2. Ensure no fluids leak into the cargo area to avoid vehicle damage. 3. Determine the combined weight of occupants and cargo should not exceed the specified limit. 4. Calculate the available cargo and luggage load capacity by subtracting the combined weight of occupants from the specified limit. 5. Distribute cargo weight properly by stowing heavy cargo as far forward and low as possible. 6. Secure cargo using retaining straps, cargo nets, or cargo straps to prevent danger to occupants during braking and maneuvers. 7. Never exceed the approved gross vehicle weight or axle loads to maintain safety and comply with traffic laws.

Is the manual of the BMW X1 sDrive28i (2015) available in English?

Yes, the manual of the BMW X1 sDrive28i (2015) is available in English .

Is your question not listed? Ask your question here

No results