BMW X1 sDrive28i (2015) manual

BMW X1 sDrive28i (2015)
7.8 · 1
PDF manual
 · 297 pages
English
manualBMW X1 sDrive28i (2015)
The system stores and maintains the speed.

Accelerating using the lever

Accelerating slightly:
Press the lever to the resistance point, arrow 1,
until the desired speed is reached.
Accelerating significantly:
Press the lever beyond the resistance point,
arrow 1, until the desired speed is reached.
The vehicle accelerates without pressure on
the accelerator pedal. The system stores and
maintains the speed.

Decreasing speed

Repeatedly pull the lever to the resistance
point or beyond, arrow 2, until the desired
speed is displayed.
Each time the lever is pulled to the resist‐
ance point, the desired speed is decreased
by approx. 1 mph/1 km/h.
Each time the lever is pulled beyond the
resistance point, the desired speed is re‐
duced by up to 5 mph/10 km/h until the
minimum speed of 20 mph/30 km/h is ach‐
ieved.
The system stores and maintains the speed.

Deactivating cruise control

Push the lever upwards or downwards, ar‐
row 3.
The displays in the speedometer go out.
In addition, the system is automatically deacti‐
vated when:
The brakes are applied.
Selector lever position N is engaged or
transmission position D is disengaged.
When DTC is activated or DSC is deacti‐
vated.
When DSC or ABS is intervening.
Cruise control is not deactivated by depressing
the accelerator pedal. Once the accelerator
pedal is released, the stored speed is achieved
again and maintained.

Warning light

The warning lamp comes on when
cruise control has been deactivated
as a result of DSC intervention, for
example. A message appears on the Control
Display.

Resuming a speed stored beforehand

Press the button, arrow 4. The last stored
speed is resumed and maintained.
In the following cases, the stored speed value
is deleted and cannot be called up again:
When driving stability control systems in‐
tervene.
When selector lever position N is engaged
or transmission position D is disengaged.
When the ignition is switched off.

Displays in the instrument cluster

1 Stored speed
2 Selected speed is displayed briefly
If the display --- mph or --- km/h appears
briefly, conditions may not be adequate to op‐
erate the system.
Call up Check Control messages, refer to
page 83.
Seite 104
Controls Driving comfort
104
Online Edition for Part no. 01 40 2 954 052 - II/15

Manual

View the manual for the BMW X1 sDrive28i (2015) here, for free. This manual comes under the category cars and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the BMW X1 sDrive28i (2015) or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BMW and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BMW X1 sDrive28i (2015) specifications

Below you will find the product specifications and the manual specifications of the BMW X1 sDrive28i (2015).

General
BrandBMW
ModelX1 sDrive28i (2015)
Productcar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BMW X1 sDrive28i (2015) below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

Where can I find the VIN number of my BMW?

The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the BMW X1 sDrive28i (2015)for the exact location of the VIN number.

What is a VIN number?

The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.

When does my BMW need maintenance?

Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.

When should I change the brake fluid of my BMW?

It is recommended to change the brake fluid every two years.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

One or more doors won't open from the inside. Now what?

The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How should I secure cargo in the BMW X1 sDrive28i (2015) to ensure safety during braking and avoidance maneuvers?

To secure cargo in the BMW X1 sDrive28i (2015) for safety during braking and avoidance maneuvers, follow these steps: 1. Stow heavy cargo as far forward and as low as possible, ideally behind the backrests. 2. Cover sharp edges and corners of the cargo to prevent injuries. 3. Avoid piling cargo higher than the top edge of the backrests. 4. If needed, fold down the rear backrests to accommodate cargo. 5. Use the partition net to protect passengers and ensure objects cannot penetrate it. 6. Place protective material around sharp or pointed objects that could bump against the rear window. 7. Secure smaller and lighter items with retaining straps, a cargo net, or draw straps. 8. Secure larger and heavy objects with cargo straps attached to lashing eyes in the cargo area. 9. Never stow heavy and hard objects in the passenger compartment without securing them to prevent dangers during braking and avoidance maneuvers. 10. Ensure not to exceed approved vehicle weight limits to maintain safety and comply with traffic laws.

What precautions should I take to prevent exceeding the approved gross vehicle weight or approved axle loads in the BMW X1 sDrive28i (2015)?

To prevent exceeding the approved gross vehicle weight or approved axle loads in the BMW X1 sDrive28i (2015), follow these precautions: 1. Avoid overloading the vehicle to prevent overheating and tire damage. 2. Ensure no fluids leak into the cargo area to avoid vehicle damage. 3. Determine the combined weight of occupants and cargo should not exceed the specified limit. 4. Calculate the available cargo and luggage load capacity by subtracting the combined weight of occupants from the specified limit. 5. Distribute cargo weight properly by stowing heavy cargo as far forward and low as possible. 6. Secure cargo using retaining straps, cargo nets, or cargo straps to prevent danger to occupants during braking and maneuvers. 7. Never exceed the approved gross vehicle weight or axle loads to maintain safety and comply with traffic laws.

Is the manual of the BMW X1 sDrive28i (2015) available in English?

Yes, the manual of the BMW X1 sDrive28i (2015) is available in English .

Is your question not listed? Ask your question here

No results