BMW 740i (2001) manual

BMW 740i (2001)
9.1 · 1
PDF manual
 · 216 pages
English
manualBMW 740i (2001)
151n
Index Data Technology Repairs Car care Controls Overview

Engine oil Coolant

Comply with the applicable envi-
ronmental laws regulating the dis-
posal of used oil.<
Recommendation: Have the oil
changed by your BMW center.
Continuous exposure to used oil
has caused cancer in laboratory
testing.
Any skin areas that come into contact
with oil should therefore be thoroughly
washed with soap and water.
Store oils, greases, and similar materi-
als so that they are inaccessible to chil-
dren. Comply with all warnings on the
containers.<
Do not add coolant to the cooling
system when the engine is hot.
Escaping coolant can cause burns.
To avoid the possibility of damage later
on, never use anything other than fac-
tory-approved, nitrite and amino-free
extended-duty antifreeze with corrosion
protectant. Your authorized BMW cen-
ter is familiar with the official specifica-
tions.
Antifreeze and anti-corrosion agents
are hazardous to health. Store anti-
freeze and anti-corrosion agents in their
original containers where they are inac-
cessible to children.
Extended-duty antifreeze with corro-
sion inhibitor contains ethylene glycol -
a flammable substance. For this reason,
do not spill antifreeze with corrosion in-
hibitor on hot engine components. It
could catch fire and cause serious
burns.<
Comply with the applicable envi-
ronmental laws regulating the dis-
posal of extended-duty antifreeze with
corrosion inhibitor.<

Checking coolant level

Correct coolant level when the engine
is cold (approx. 687/206):
Unscrew the cap from the expansion
tank.
The coolant level is correct when the
end of the red float is aligned with the
upper edge of the filler opening (refer to
the arrow in the illustration), or max.
0.8 in (2 cm) higher, for instance up to
the second mark on the float (see also
the schematic diagramm next to the
cap).
380de081
Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW Group

Manual

View the manual for the BMW 740i (2001) here, for free. This manual comes under the category cars and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the BMW 740i (2001) or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BMW and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BMW 740i (2001) specifications

Below you will find the product specifications and the manual specifications of the BMW 740i (2001).

The BMW 740i, a luxury sedan released in 2001, features a powerful V8 engine that provides ample acceleration and performance on the road. The car is known for its spacious interior, offering comfort and room for passengers. With a focus on luxury, the BMW 740i includes high-quality materials throughout the cabin, providing a premium driving experience. In terms of technology, the 2001 BMW 740i comes equipped with a range of features such as a premium sound system, navigation system, and advanced safety features. These technologies enhance the overall driving experience and add convenience for the driver and passengers. The exterior design of the BMW 740i is elegant and timeless, with a sleek silhouette and classic BMW styling cues. The car's aerodynamic shape contributes to its performance and efficiency on the road. Overall, the BMW 740i (2001) is a well-rounded luxury sedan that offers a blend of performance, comfort, and technology for drivers who prioritize a premium driving experience.

General
BrandBMW
Model740i (2001)
Productcar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BMW 740i (2001) below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

Where can I find the VIN number of my BMW?

The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the BMW 740i (2001)for the exact location of the VIN number.

What is a VIN number?

The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.

When does my BMW need maintenance?

Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.

When should I change the brake fluid of my BMW?

It is recommended to change the brake fluid every two years.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

One or more doors won't open from the inside. Now what?

The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How do I open the engine compartment of the BMW 740i (2001)?

To open the engine compartment of the BMW 740i (2001), follow these steps: 1. Make sure the vehicle is parked and the engine is turned off. 2. Locate the hood release lever inside the car. It is usually located on the driver's side, below the dashboard. 3. Pull the hood release lever to release the hood latch. 4. Exit the car and go to the front of the vehicle. 5. Locate the secondary hood release lever, which is located near the center of the front grille. 6. Pull the secondary hood release lever to fully release the hood latch. 7. Lift the hood and prop it open with the hood support rod, which is usually located on the underside of the hood. 8. You now have access to the engine compartment of the BMW 740i (2001). Please note that these instructions are specific to the BMW 740i (2001) model. Always refer to the owner's manual for detailed instructions and safety precautions.

What are the engine specifications for the BMW 740i (2001)?

The engine specifications for the BMW 740i (2001) are as follows: - Displacement: The engine has a displacement of 4,398 cubic centimeters (268.4 cubic inches). - Number of cylinders: The engine has 12 cylinders. - Maximum output: The maximum output of the engine is 282 horsepower at 5,400 revolutions per minute (rpm). - Maximum torque: The maximum torque of the engine is 324 foot-pounds (439 Newton-meters) at 3,700 rpm. - Compression ratio: The compression ratio of the engine is 10.0. - Stroke/bore: The stroke of the engine is 3.26 inches (82.7 millimeters) and the bore is 3.62 inches (92.0 millimeters). - Fuel-injection system: The engine is equipped with a digital-electronic engine-management system. These specifications provide an overview of the engine's performance and characteristics.

Is the manual of the BMW 740i (2001) available in English?

Yes, the manual of the BMW 740i (2001) is available in English .

Is your question not listed? Ask your question here

No results