BMW 318i (1998) manual

BMW 318i (1998)
8.8 · 6
PDF manual
 · 179 pages
English
manualBMW 318i (1998)
132

Exterior finish

To provide effective corrosion protec-
tion, multilayer paintwork is applied at
the factory. Cataphoretic immersion
priming techniques are supplemented
using special body-cavity protectants,
with the application of specially-devel-
oped and extensively tested materials.
The entire underbody is sprayed with a
flexible PVC layer before final compre-
hensive application of a wax-based
protectant.
Regular maintenance makes an impor-
tant contribution to maintaining the
safety and value of your vehicle.
Increasing awareness of the effects of
harmful environmental factors on vehi-
cle finishes have led paint and vehicle
manufacturers to initiate ongoing pro-
grams designed to further improve the
durability of their finishes. Despite the
high quality of the resulting products,
local and regional factors can still have
a negative effect on your car's paint-
work. These should guide you in deter-
mining the frequency and extent of your
efforts to maintain the vehicle finish.
Depending upon material and type of
impact (perforation of paint layer), phys-
ical stresses from sand, road salt,
gravel, etc. can cause corrosion to start
extending beneath the finish, starting at
the point of impact.
Road dirt, tar spots, dead insects, ani-
mal droppings (strong alkali effect) and
tree excretions (resins and pollen) all
contain substances capable of causing
damage when allowed to remain on
your car's finish for any period of time
(spots, etching, flaking, separation in
the top coat).
In industrial areas, deposits from fly ash,
lime, oily soot, sulphur dioxide in pre-
cipitation (acid rain) and other environ-
mental pollutants will damage the car's
surface (usually limited to the external
horizontal surfaces) unless adequate
protection is provided.
In coastal regions, high levels of atmo-
spheric salt and humidity promote cor-
rosion.
In tropical zones, temperatures of over
100 5F (approx. 406) in the shade pre-
vail, in addition to heavy ultraviolet radi-
ation and high humidity. Under those
circumstances, light-colored paints
reach temperatures of up to 175 5F
(approx. 806) and dark paints up to
250 5F (approx. 1206).

Caring for the vehicle finish

As a precaution against damage result-
ing from exposure to aggressive sub-
stances, we recommend that you wash
the car weekly when it is used in an
area with high levels of air pollution or
aggressive natural substances (tree
resin, pollen).
Remove particularly aggressive sub-
stances immediately in order to prevent
changes to, and discoloration of, the
paint. Such substances are e.g., gaso-
line spilled during refueling, oil, grease,
brake fluid and bird droppings.
Any contamination remaining on the
surface of the vehicle will be especially
conspicuous after washing. Use clean-
ing fluid or alcohol with a clean cloth or
cotton pad to remove. You can use tar
remover to remove any spots on the fin-
ish of the vehicle, but should never
apply it or any other aggressive
cleanser to lenses or headlamp covers.
These areas should then be waxed to
maintain protection.

bA full range of car-care products is

available from your BMW Retailer.c

Caring for your car

Online Edition for Part No. 01 41 9 790 377 - © 07/98 BMW AG

Manual

View the manual for the BMW 318i (1998) here, for free. This manual comes under the category cars and has been rated by 6 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the BMW 318i (1998) or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BMW and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BMW 318i (1998) specifications

Below you will find the product specifications and the manual specifications of the BMW 318i (1998).

The BMW 318i is a four-door compact executive car that was first introduced in 1991. The 1998 model featured a 1.9-liter inline-four engine, which produced a maximum power output of around 138 horsepower. This rear-wheel drive vehicle offered a choice of a manual or automatic transmission. In terms of dimensions, the BMW 318i measured approximately 174 inches in length, 67 inches in width, and had a wheelbase of about 107 inches. It had a curb weight of around 3,000 pounds. The 1998 BMW 318i came equipped with a range of standard features including power windows, air conditioning, cruise control, and a tilt and telescopic steering wheel. Safety features included dual front airbags, antilock brakes, and stability control. The interior of the BMW 318i was well-designed and offered comfortable seating for up to five passengers. The trunk had a decent amount of space for a vehicle in its class. While the 1998 BMW 318i provided a smooth and comfortable ride, its performance may not have been as impressive as some other models in its range. The acceleration was adequate, but not particularly quick. Additionally, the handling was precise, but lacking in excitement. Overall, the BMW 318i (1998) was a reliable and well-built car that offered a decent level of comfort and safety features. It may not have been the most powerful or exhilarating option in its class, but it provided a satisfactory driving experience for those seeking a compact executive vehicle.

General
BrandBMW
Model318i (1998)
Productcar
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BMW 318i (1998) below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

Where can I find the VIN number of my BMW?

The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the BMW 318i (1998)for the exact location of the VIN number.

What is a VIN number?

The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.

When does my BMW need maintenance?

Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.

When should I change the brake fluid of my BMW?

It is recommended to change the brake fluid every two years.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

One or more doors won't open from the inside. Now what?

The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

Why is the engine oil warning light on?

This could indicate a low oil level or a potential issue with the oil pressure. It is recommended to check the oil level on the dipstick and refill if necessary. If the warning light persists after refilling, it is advisable to have the car inspected by a professional.

How do I change the windshield wiper blades?

To replace the windshield wiper blades, lift the wiper arm away from the windshield and locate the release tab. Press the tab, then slide the blade assembly downwards to remove it. Align the new blade and slide it in until it clicks into place. Finally, lower the wiper arm back onto the windshield.

What should I do if the car overheats?

If your car's temperature gauge shows that it is overheating, it is important to pull over safely and turn off the engine immediately. Allow the engine to cool down before attempting any troubleshooting. Check the coolant level under the hood once the engine is cooled. If it is low, refill it to the appropriate level and check for any leaks. If the problem persists, it is best to consult a professional mechanic.

How do I change a flat tire?

Firstly, find a safe location away from traffic to change the tire. Use the included jack to raise the vehicle off the ground at the recommended jacking points. Remove the lug nuts by turning counterclockwise, and then take off the flat tire. Place the spare tire onto the wheel studs and hand-tighten the lug nuts. Lower the vehicle and tighten the lug nuts in a star pattern. Finally, ensure all lug nuts are properly tightened.

How can I reset the Service Interval indicator?

To reset the Service Interval indicator, turn on the ignition without starting the engine. Use the trip odometer button to scroll through the different menus until you reach the Service Interval display. Press and hold the button until the display resets to the new interval. Be aware that this may vary depending on the specific model and year of your BMW 318i.

Is the manual of the BMW 318i (1998) available in English?

Yes, the manual of the BMW 318i (1998) is available in English .

Is your question not listed? Ask your question here

No results