To manually set the time select Manual time setting and set your data and time.
When setting the time manually, please set to the expected time you will use the BlackVue(not the present time).
If you connect the GPSreceiver:
If you run the dashcam with the GPS receiver connected, it is possible to sync with GPS time. To sync with GPS time, select your GMT time
zone. The factory setting is GMT -11.
Some examples of GMT time osets are:
-GMT-7: Los Angeles
-GMT-4: New York
-GMT+0: London
-GMT+1: Paris
-GMT+3: Moscow
-GMT+8: Singapore
-GMT+9: Seoul
-GMT+10: Sydney
If you are unsure of your GMT oset please look up your city on https://greenwichmeantime.com/
* Selecting Daylight saving time will advance the clock by one hour.
Video settings
–Resolution
Select the resolution and frame rate. For example, “FHD@30 + FHD@30” means the front camera records Full HD video at 30 frames per
second, and the rear camera records Full HD video at 30 frames per second.
Manual
View the manual for the BlackVue DR590-2CH here, for free. This manual comes under the category dashcams and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the BlackVue DR590-2CH or do you need help? Ask your question here
Need help?
Do you have a question about the BlackVue and is the answer not in the manual?
Question and answer
Number of questions: 0