Blackmagic Design Video Assist manual

Blackmagic Design Video Assist
8.7 · 2
PDF manual
 · 848 pages
English
manualBlackmagic Design Video Assist

Gravar Imagens HDMI Limpas a partir de Câmeras DSLR

Algumas câmeras DSLR gravam vídeos de 8 bits internamente e outras são capazes de
fornecer uma imagem de vídeo nítida através de suas saídas HDMI. Ao conectar a saída HDMI
da câmera DSLR ao seu Video Assist, você pode dispensar a compressão interna da câmera
e realizar a gravação usando codecs ProRes ou Avid DNx de 10 bits de alta qualidade. Algumas
câmeras DSLR podem produzir imagens 4:2:2 de 10 bits, obtendo uma qualidade de vídeo
superior do que a compressão 4:2:0 de 8 bits gravada internamente.
Muitas câmeras DSLR também estão limitadas a gravações de duração curta, portanto um
benefício adicional da gravação externa é poder dispensar essas limitações de gravação.
Isto é particularmente útil ao gravar eventos ao vivo ou entrevistas para documentários.
Para tirar o máximo proveito desse recurso, você precisará configurar a sua câmera para
produzir uma imagem limpa com as sobreposições desativadas. Isso geralmente é feito
alterando as configurações da saída HDMI da câmera DSLR, assim nenhuma informação de
status é exibida no sinal de vídeo. Isto é importante porque caso algumas sobreposições
estejam visíveis na sua imagem através da saída HDMI, elas serão gravadas no seu vídeo,
o que provavelmente você não quer que aconteça.
Para verificar se as sobreposições da câmera DSLR não estão visíveis:
1 Deslize a tela de toque para cima ou para baixo para ocultar os medidores na tela,
assim você monitora apenas a imagem da sua câmera DSLR. Nos modelos Video
Assist de 7", a barra de ferramentas na parte superior da tela LCD é independente
e separada da imagem. Isso significa que você pode monitorar a imagem inteira
nitidamente e ainda consegue visualizar a barra de ferramentas superior.
2 Com os medidores ocultos na tela, verifique cuidadosamente se o vídeo de saída
da câmera DSLR não exibe informações além da sua imagem de vídeo limpa. Caso
seja possível visualizar as sobreposições da câmera na tela LCD do seu Video Assist,
altere a saída HDMI ou exiba as configurações de menu na sua câmera para que as
sobreposições HDMI sejam desativadas.
Com uma saída HDMI limpa da sua câmera, agora você será capaz de gravar vídeos de
melhor qualidade.

Reprodução

Os controles de transporte se encontram na barra de ferramentas inferior. Caso a barra de
ferramentas inferior não esteja sendo exibida, basta deslizar a tela para cima ou para baixo
para revelá-la.
Reproduzir Para reproduzir seus clipes, toque no ícone de reprodão.
Parar
Durante a reprodução, toque no ícone "Parar" ou "Pausar" para congelar
momentaneamente a reprodução em um quadro de vídeo.
Saltar
Você pode avançar ou recuar seus clipes tocando repetidamente
os ícones de avanço ou recuo. Tocar no ícone de recuo uma vez
reiniciará o clipe atual.
Shuttle
Segure o botão de avanço ou retrocesso para alternar para o modo
shuttle. Agora você pode avançar ou retroceder em velocidades de x1/2
a x50 tocando nos botões shuttle. Pressione Parar ou Reproduzir para
configurar os botões de volta ao modo de salto.
703Reprodução

Manual

View the manual for the Blackmagic Design Video Assist here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Blackmagic Design Video Assist or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Blackmagic Design and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
J
James June 16, 2024

How to get hdmi input to sdi output

Blackmagic Design Video Assist specifications

Below you will find the product specifications and the manual specifications of the Blackmagic Design Video Assist.

The Blackmagic Design Video Assist is a video recording accessory specifically designed for professional use. With a compact size, it features a 5-inch display with a resolution of 1920 x 1080 pixels, providing sharp and clear visuals. The LED backlight ensures optimal brightness and visibility, making it suitable for various lighting conditions. Additionally, the touchscreen functionality allows for easy navigation and control. While it does not include a built-in speaker, it offers multiple connectivity options for audio playback. It has an HDMI output and headphone out port, enabling users to connect external speakers or headphones for monitoring purposes. Furthermore, it supports 6G-SDI input, providing flexibility for professional video production setups. In terms of storage, the Video Assist has one memory slot compatible with SD, SDHC, and SDXC memory cards. This allows for convenient and expandable storage options, ensuring ample space for recording and storing video files. With two HDMI ports, including one HDMI in port, the Video Assist allows for seamless integration with other devices, such as cameras or monitors. This enhances versatility and flexibility during video production, enabling real-time monitoring or signal routing. Overall, the Blackmagic Design Video Assist is a reliable and feature-rich video recording accessory. Its compact size, high-resolution display, touchscreen functionality, and multiple connectivity options make it a suitable choice for professional videographers and filmmakers.

General
BrandBlackmagic Design
ModelVideo Assist | HYPERD/AVIDAS5HD
Productspeaker
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Optical drive
Optical drive includedNo
Display
Display diagonal5 "
Display resolution1920 x 1080 pixels
LED backlightYes
TouchscreenYes
Aspect ratio16:9
Design
Product colorBlack
Built-in speaker(s)No
Storage
Number of memory slots1
Compatible memory cardsSD, SDHC, SDXC
Ports & interfaces
HDMI ports quantity2
HDMI in1
HDMI outputYes
Headphone outYes
6G‑SDI inputYes
6G‑SDI outputYes
Power connectorYes
USB 2.0 ports quantity1
Serial Digital Interface (SDI) standardSMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 425M
Power
Power supply typeBattery/DC
Input voltage12 V
Battery technologyLithium-Ion (Li-Ion)
Battery typeLP-E6
Packaging content
AC adapter includedYes
ManualYes
Software includedYes
Batteries includedNo
Bundled softwareDaVinci Resolve grading software
Weight & dimensions
Width143 mm
Depth30.5 mm
Height90 mm
Weight362 g
System requirements
Mac operating systems supportedMac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 8.1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-21 - 45 °C
Operating relative humidity (H-H)0 - 90 %
Features
Analog signal format systemNTSC, PAL
Supported video modes720p, 1080i, 1080p, 2160p
Supported chroma subsampling4:2:2
SDI metadata supportHD RP188
Audio sampling rate48 kHz
Audio sampling rate24 bit
Color depth10 bit
Color gamutsBT.601, BT.709
Copy protectionYes
Supported codecsProRes 422 HQ, ProRes 422, ProRes422 LT, ProRes Proxy, DNxHD 220x, DNxHD 145, DNxHD 45, DNxHD 220xMXF, DNxHD 145 MXF, DNxHD 45MXF
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Blackmagic Design Video Assist below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the weight of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a weight of 362 g.

What is the screen size of the Blackmagic Design Video Assist?

The screen size of the Blackmagic Design Video Assist is 5 ".

What is the height of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a height of 90 mm.

What is the screen resolution of the display of the Blackmagic Design Video Assist?

The screen resolution of the Blackmagic Design Video Assist is 1920 x 1080 pixels.

What is the width of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a width of 143 mm.

What is the depth of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a depth of 30.5 mm.

How do I connect my Blackmagic Design Video Assist to my camera?

To connect the Video Assist to your camera, use the appropriate HDMI or SDI cable provided. The HDMI cable can plug into the "HDMI In" port on the Video Assist and the corresponding HDMI output on your camera. Alternatively, you can utilize an SDI cable by connecting it to the SDI input/output ports, ensuring the cable is securely attached on both ends.

How can I adjust the brightness of the screen on the Video Assist?

To adjust the brightness on your Video Assist, locate the "Brightness" control in the settings menu. It allows you to increase or decrease the brightness level to suit your preference. Navigate to the settings by pressing the "Menu" button on the Video Assist, then use the arrow buttons to find the brightness control.

What is the maximum storage capacity supported by the Video Assist?

The Blackmagic Design Video Assist supports SD cards and UHS-II SD cards up to a maximum capacity of 256GB. Please ensure you are using a compatible SD card to avoid any potential issues with storage capacity.

Can I record audio using the Video Assist? If so, how?

Yes, you can record audio using the Video Assist. Connect your microphone or audio source to the audio input on the Video Assist using a standard 3.5mm jack. Ensure the audio input level is adjusted correctly in the settings menu to capture clear sound. Remember to monitor the audio levels during recording to ensure optimal audio quality.

How do I update the firmware on the Video Assist?

To update the firmware on your Video Assist, first, download the latest firmware from the official Blackmagic Design website onto a USB flash drive. Insert the USB drive into the USB port of the Video Assist. Navigate to the settings menu, find the "Firmware Update" option, and select it. The Video Assist will detect the firmware file on the USB drive and guide you through the update process.

Does Blackmagic Design Video Assist have an optical drive?

No, Blackmagic Design Video Assist does not have an optical drive. This means that the user cannot play CDs or DVDs directly on this device.

What is the display diagonal of Blackmagic Design Video Assist?

The display diagonal of Blackmagic Design Video Assist is 5 inches. This size allows for a compact and portable design.

Does Blackmagic Design Video Assist have a touchscreen?

Yes, Blackmagic Design Video Assist has a touchscreen. This feature enhances user experience and allows for easier navigation and control of the device.

Does Blackmagic Design Video Assist have a built-in speaker?

No, Blackmagic Design Video Assist does not have a built-in speaker. This means that the user will need external speakers or headphones to listen to audio.

How many HDMI ports does Blackmagic Design Video Assist have?

Blackmagic Design Video Assist has 2 HDMI ports. This allows for easy connectivity with other devices such as cameras or monitors.

Is the manual of the Blackmagic Design Video Assist available in English?

Yes, the manual of the Blackmagic Design Video Assist is available in English .

Is your question not listed? Ask your question here

No results