Blackmagic Design Video Assist manual

Blackmagic Design Video Assist
8.7 · 2
PDF manual
 · 848 pages
English
manualBlackmagic Design Video Assist
이는, 마이크가 라인 레벨 출력 장에 비해 출력의 세기가 약간 떨어기 때문에 이를 Blackmagic
Video Assist 7" 모델에서 증켜 최적화하기 위한 설. XLR 아날로그 입력을 사용하지 않고
스 비디오에 임베드된
SDIHDMI 채널 1/2를 그대로 사용하려면, ‘디오’를 선택하세요. Video
Assist 7" 12G 모델에서는, 소스 선택 아래에 위치한 오디오 미터에서 XLR의 레벨을 조절할 수
있습니다.
참고 사용하는 Video Assist의 전원을 껐다가 다시 켜도 지정해둔 설정 사항은 그대로
유지됩니다. 연결을 변경할 경우, 오디오 설정을 반드시 초기화하세요.

XLR 패드

소란스럽고 시끄러운 소음이 돌발적으로 발생하는 환경에서 촬영하는 경우, XLR 패딩 기능을 ‘ON’으
설정하세요. 이는 오디오 레벨을 약간 낮추고 좀 더 넓은 오디오 레벨 범위를 제공하여 클리핑 현상을
지하기 위한 설정니다. 일반적인 오디오 환경에서 촬영할 경우, 이 기능을 ‘

OFF’로 설정하세요.

팬텀 파워
자체 전원 공급형이 아닌 마이크를 연결할 경우, 팬텀 파워를 지원하는 XLR넥터를 통해 전원을 공급할
수 있습니다. 간단히 해당 설정을 ‘

ON’으로 변경하세요.

참고 팬텀 파워가 공급되면 일부 배터리 전원식 마이크가 손상될 위험이 있으므로 마이크 사용
시 해당 설정을 반드시 ‘

OFF’로 설정하세요.

오디오 채널 녹
Blackmagic Video Assist 12G HDR델은 한번에 최대 16개의 오디오 채널을 녹음할 수 있습니다.
2개에서 16개까지의 채널이 지원되므로 원하는 만큼의 채널을 사용해 보세요.

메뉴 설정

모니터링
Video Assist는 다양한 탭 메뉴를 통해 추가 설정이 가능합니다.
카드에 드롭 프레임 현상 발생 시
끔 높은 프레임 레이트 포맷으로 녹화하기 위UHS-I SD 같이 속도가 느린 저장 미디어를 사용할 시,
드롭 프레임 현상을 경험할 수 있습니다. 이러한 경우, 사용자의 워크플로에 따라 녹를 중단하고 싶은
경우가 있습니다.
Blackmagic Video Assist 12G HDR델의 경우, ‘녹화 중단’을 선택하여 녹화를 중단하면 됩니. 만
계속 녹화하면서 드롭 프레임 현상 발생 여부를 확인하고 싶을 경우, ‘경고’를 선택합니다. 미디어의 문제가
감지되면

LCD 화면 오른쪽 하단 모서리에 느낌표가 나타납니다.

3D LUT 디스플레이

3D LUT 디스플레이’ 토글 스위치를 눌러 선택된 3D LUT를 켜고 끌 수 있습니다. 선된 디스플레이
LUT이 하나도 없을 경우에는 이 옵션이 비활성화 됩니다. LUT를 불러오는 방법에 대한 자세한 정보는
본 설명서의 뒷편에 대시보드 메뉴와 관련하여 ‘

LUT’ 탭을 참고하세요.

494
설정 변경하

Manual

View the manual for the Blackmagic Design Video Assist here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Blackmagic Design Video Assist or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Blackmagic Design and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
J
James June 16, 2024

How to get hdmi input to sdi output

Blackmagic Design Video Assist specifications

Below you will find the product specifications and the manual specifications of the Blackmagic Design Video Assist.

The Blackmagic Design Video Assist is a video recording accessory specifically designed for professional use. With a compact size, it features a 5-inch display with a resolution of 1920 x 1080 pixels, providing sharp and clear visuals. The LED backlight ensures optimal brightness and visibility, making it suitable for various lighting conditions. Additionally, the touchscreen functionality allows for easy navigation and control. While it does not include a built-in speaker, it offers multiple connectivity options for audio playback. It has an HDMI output and headphone out port, enabling users to connect external speakers or headphones for monitoring purposes. Furthermore, it supports 6G-SDI input, providing flexibility for professional video production setups. In terms of storage, the Video Assist has one memory slot compatible with SD, SDHC, and SDXC memory cards. This allows for convenient and expandable storage options, ensuring ample space for recording and storing video files. With two HDMI ports, including one HDMI in port, the Video Assist allows for seamless integration with other devices, such as cameras or monitors. This enhances versatility and flexibility during video production, enabling real-time monitoring or signal routing. Overall, the Blackmagic Design Video Assist is a reliable and feature-rich video recording accessory. Its compact size, high-resolution display, touchscreen functionality, and multiple connectivity options make it a suitable choice for professional videographers and filmmakers.

General
BrandBlackmagic Design
ModelVideo Assist | HYPERD/AVIDAS5HD
Productspeaker
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Optical drive
Optical drive includedNo
Display
Display diagonal5 "
Display resolution1920 x 1080 pixels
LED backlightYes
TouchscreenYes
Aspect ratio16:9
Design
Product colorBlack
Built-in speaker(s)No
Storage
Number of memory slots1
Compatible memory cardsSD, SDHC, SDXC
Ports & interfaces
HDMI ports quantity2
HDMI in1
HDMI outputYes
Headphone outYes
6G‑SDI inputYes
6G‑SDI outputYes
Power connectorYes
USB 2.0 ports quantity1
Serial Digital Interface (SDI) standardSMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 425M
Power
Power supply typeBattery/DC
Input voltage12 V
Battery technologyLithium-Ion (Li-Ion)
Battery typeLP-E6
Packaging content
AC adapter includedYes
ManualYes
Software includedYes
Batteries includedNo
Bundled softwareDaVinci Resolve grading software
Weight & dimensions
Width143 mm
Depth30.5 mm
Height90 mm
Weight362 g
System requirements
Mac operating systems supportedMac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 8.1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-21 - 45 °C
Operating relative humidity (H-H)0 - 90 %
Features
Analog signal format systemNTSC, PAL
Supported video modes720p, 1080i, 1080p, 2160p
Supported chroma subsampling4:2:2
SDI metadata supportHD RP188
Audio sampling rate48 kHz
Audio sampling rate24 bit
Color depth10 bit
Color gamutsBT.601, BT.709
Copy protectionYes
Supported codecsProRes 422 HQ, ProRes 422, ProRes422 LT, ProRes Proxy, DNxHD 220x, DNxHD 145, DNxHD 45, DNxHD 220xMXF, DNxHD 145 MXF, DNxHD 45MXF
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Blackmagic Design Video Assist below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the weight of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a weight of 362 g.

What is the screen size of the Blackmagic Design Video Assist?

The screen size of the Blackmagic Design Video Assist is 5 ".

What is the height of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a height of 90 mm.

What is the screen resolution of the display of the Blackmagic Design Video Assist?

The screen resolution of the Blackmagic Design Video Assist is 1920 x 1080 pixels.

What is the width of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a width of 143 mm.

What is the depth of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a depth of 30.5 mm.

How do I connect my Blackmagic Design Video Assist to my camera?

To connect the Video Assist to your camera, use the appropriate HDMI or SDI cable provided. The HDMI cable can plug into the "HDMI In" port on the Video Assist and the corresponding HDMI output on your camera. Alternatively, you can utilize an SDI cable by connecting it to the SDI input/output ports, ensuring the cable is securely attached on both ends.

How can I adjust the brightness of the screen on the Video Assist?

To adjust the brightness on your Video Assist, locate the "Brightness" control in the settings menu. It allows you to increase or decrease the brightness level to suit your preference. Navigate to the settings by pressing the "Menu" button on the Video Assist, then use the arrow buttons to find the brightness control.

What is the maximum storage capacity supported by the Video Assist?

The Blackmagic Design Video Assist supports SD cards and UHS-II SD cards up to a maximum capacity of 256GB. Please ensure you are using a compatible SD card to avoid any potential issues with storage capacity.

Can I record audio using the Video Assist? If so, how?

Yes, you can record audio using the Video Assist. Connect your microphone or audio source to the audio input on the Video Assist using a standard 3.5mm jack. Ensure the audio input level is adjusted correctly in the settings menu to capture clear sound. Remember to monitor the audio levels during recording to ensure optimal audio quality.

How do I update the firmware on the Video Assist?

To update the firmware on your Video Assist, first, download the latest firmware from the official Blackmagic Design website onto a USB flash drive. Insert the USB drive into the USB port of the Video Assist. Navigate to the settings menu, find the "Firmware Update" option, and select it. The Video Assist will detect the firmware file on the USB drive and guide you through the update process.

Does Blackmagic Design Video Assist have an optical drive?

No, Blackmagic Design Video Assist does not have an optical drive. This means that the user cannot play CDs or DVDs directly on this device.

What is the display diagonal of Blackmagic Design Video Assist?

The display diagonal of Blackmagic Design Video Assist is 5 inches. This size allows for a compact and portable design.

Does Blackmagic Design Video Assist have a touchscreen?

Yes, Blackmagic Design Video Assist has a touchscreen. This feature enhances user experience and allows for easier navigation and control of the device.

Does Blackmagic Design Video Assist have a built-in speaker?

No, Blackmagic Design Video Assist does not have a built-in speaker. This means that the user will need external speakers or headphones to listen to audio.

How many HDMI ports does Blackmagic Design Video Assist have?

Blackmagic Design Video Assist has 2 HDMI ports. This allows for easy connectivity with other devices such as cameras or monitors.

Is the manual of the Blackmagic Design Video Assist available in English?

Yes, the manual of the Blackmagic Design Video Assist is available in English .

Is your question not listed? Ask your question here

No results