Blackmagic Design Video Assist manual

Blackmagic Design Video Assist
8.7 · 2
PDF manual
 · 848 pages
English
manualBlackmagic Design Video Assist

3D-LUT anzeigen

Tippen Sie auf das Einstellungs-Icon, um Ihre ausgewählte 3D-Display-LUT ein- oder auszuschalten. Wenn
keine Display-LUT ausgewählt ist, ist die Option „3D-LUT anzeigen“ deaktiviert. Weitere Informationen zum
Laden von LUTs über das Dashboard-Menü, siehe Abschnitt „LUTs“ weiter hinten im Handbuch.

Nur blau

Ihr Blackmagic Video Assist bietet einen „Nur blau“-Modus, der lediglich den blauen Kanal in Form eines
Schwarzweißbildes anzeigt. Da Bildrauschen in einem digitalen Videosignal am stärksten im blauen Kanal
sichtbar ist, können Sie es anhand dieser Funktion auf Rauschen prüfen. Das Schwarzweißbild können Sie
auch als Hilfe beim Kontrollieren der Kamerafokussierung verwenden. Aktivieren Sie denNur blau“-Modus,
indem Sie „Ein“ wählen.

LCD-Bildschirmrotation

Wenn Sie die automatische Bildschirmrotation deaktivieren möchten, wählen Sie „Aus“. Das Display bleibt
nun fest in der aktuellen Position, auch wenn Sie es herumdrehen. Eine weitere Einstellung dreht den
Bildschirm um 180°. Die Anzeige bleibt hierbei in der Kopfüber-Position. Das ist praktisch, wenn das Gerät
verkehrt herum an einem Kamerarig befestigt ist. Um die automatische Bildschirmrotation zu aktivieren,
wählen Sie „Auto“.

Anamorphe Entzerrung

Ihr Blackmagic Video Assist verfügt über eine Funktion für anomorphotisches Entstauchen. Damit können
Sie sich von einer Kamera mit anamorphotischem Objektiv horizontal gestauchte Bilder korrekt horizontal
anzeigen lassen. Wie stark Ihr Bild für die Korrektur entstaucht werden muss, richtet sich nach dem
Stauchungsfaktor des jeweiligen anamorphotischen Objektivs. Entsprechend des Stauchungsgrads
verschiedener anamorphotischer Objektive, können Sie die Entstauchungswerte „x 1,33“, „x1,66“ oder
x2“ wählen. Um die Entstauchung zu deaktivieren, wählen Sie „Aus“.

Setup

Video Assist/Gerätename

Den Namen Ihres Video Assist ändern Sie, indem Sie auf das Stift-Icon rechts vom Namen tippen. Das
erleichtert Ihnen die Zuordnung des Geräts in Setups mit mehr als einem Video Assist.

Datum und Uhrzeit

Halten Sie die Datums- und Uhrzeiteinstellungen auf dem aktuellsten Stand, um nachzuvollziehen, an
welchem Datum und zu welcher Zeit ein Clip aufgenommen wurde.
So stellen Sie Datum und Uhrzeit ein:
1 Tippen Sie auf das Stift-Icon, um die Einstellungen zu bearbeiten.
2 Tippen Sie auf die Pfeile für Tag, Monat, Jahr oder Zeit, um eine Einstellung zu modifizieren.
3 Tippen Sie auf „Speichern“, um die Änderung zu bestätigen.

Sprache

Der Blackmagic Video Assist unterstützt viele Sprachen einschließlich Englisch, Deutsch, Französisch,
Italienisch, Spanisch, Portugiesisch, Türkisch, Russisch, Chinesisch, Koreanisch und Japanisch.
So geben Sie auf den 12G-Modellen des Video Assist die Sprache vor:
1 Tippen Sie zuerst auf „Sprache“ und dann auf die gewünschte Sprache.
2 Tippen Sie auf „Aktualisieren“, um zur SETUP-Registerkarte zurückzukehren.
HINWEIS Wie Sie eine Sprache auf den Modellen Blackmagic Video Assist oder Blackmagic
Video Assist4K laden, siehe „Blackmagic Video Assist Setup“ weiter hinten im Handbuch.
264Ändern von Einstellungen

Manual

View the manual for the Blackmagic Design Video Assist here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Blackmagic Design Video Assist or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Blackmagic Design and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
J
James June 16, 2024

How to get hdmi input to sdi output

Blackmagic Design Video Assist specifications

Below you will find the product specifications and the manual specifications of the Blackmagic Design Video Assist.

The Blackmagic Design Video Assist is a video recording accessory specifically designed for professional use. With a compact size, it features a 5-inch display with a resolution of 1920 x 1080 pixels, providing sharp and clear visuals. The LED backlight ensures optimal brightness and visibility, making it suitable for various lighting conditions. Additionally, the touchscreen functionality allows for easy navigation and control. While it does not include a built-in speaker, it offers multiple connectivity options for audio playback. It has an HDMI output and headphone out port, enabling users to connect external speakers or headphones for monitoring purposes. Furthermore, it supports 6G-SDI input, providing flexibility for professional video production setups. In terms of storage, the Video Assist has one memory slot compatible with SD, SDHC, and SDXC memory cards. This allows for convenient and expandable storage options, ensuring ample space for recording and storing video files. With two HDMI ports, including one HDMI in port, the Video Assist allows for seamless integration with other devices, such as cameras or monitors. This enhances versatility and flexibility during video production, enabling real-time monitoring or signal routing. Overall, the Blackmagic Design Video Assist is a reliable and feature-rich video recording accessory. Its compact size, high-resolution display, touchscreen functionality, and multiple connectivity options make it a suitable choice for professional videographers and filmmakers.

General
BrandBlackmagic Design
ModelVideo Assist | HYPERD/AVIDAS5HD
Productspeaker
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Optical drive
Optical drive includedNo
Display
Display diagonal5 "
Display resolution1920 x 1080 pixels
LED backlightYes
TouchscreenYes
Aspect ratio16:9
Design
Product colorBlack
Built-in speaker(s)No
Storage
Number of memory slots1
Compatible memory cardsSD, SDHC, SDXC
Ports & interfaces
HDMI ports quantity2
HDMI in1
HDMI outputYes
Headphone outYes
6G‑SDI inputYes
6G‑SDI outputYes
Power connectorYes
USB 2.0 ports quantity1
Serial Digital Interface (SDI) standardSMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 425M
Power
Power supply typeBattery/DC
Input voltage12 V
Battery technologyLithium-Ion (Li-Ion)
Battery typeLP-E6
Packaging content
AC adapter includedYes
ManualYes
Software includedYes
Batteries includedNo
Bundled softwareDaVinci Resolve grading software
Weight & dimensions
Width143 mm
Depth30.5 mm
Height90 mm
Weight362 g
System requirements
Mac operating systems supportedMac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 8.1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-21 - 45 °C
Operating relative humidity (H-H)0 - 90 %
Features
Analog signal format systemNTSC, PAL
Supported video modes720p, 1080i, 1080p, 2160p
Supported chroma subsampling4:2:2
SDI metadata supportHD RP188
Audio sampling rate48 kHz
Audio sampling rate24 bit
Color depth10 bit
Color gamutsBT.601, BT.709
Copy protectionYes
Supported codecsProRes 422 HQ, ProRes 422, ProRes422 LT, ProRes Proxy, DNxHD 220x, DNxHD 145, DNxHD 45, DNxHD 220xMXF, DNxHD 145 MXF, DNxHD 45MXF
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Blackmagic Design Video Assist below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the weight of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a weight of 362 g.

What is the screen size of the Blackmagic Design Video Assist?

The screen size of the Blackmagic Design Video Assist is 5 ".

What is the height of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a height of 90 mm.

What is the screen resolution of the display of the Blackmagic Design Video Assist?

The screen resolution of the Blackmagic Design Video Assist is 1920 x 1080 pixels.

What is the width of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a width of 143 mm.

What is the depth of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a depth of 30.5 mm.

How do I connect my Blackmagic Design Video Assist to my camera?

To connect the Video Assist to your camera, use the appropriate HDMI or SDI cable provided. The HDMI cable can plug into the "HDMI In" port on the Video Assist and the corresponding HDMI output on your camera. Alternatively, you can utilize an SDI cable by connecting it to the SDI input/output ports, ensuring the cable is securely attached on both ends.

How can I adjust the brightness of the screen on the Video Assist?

To adjust the brightness on your Video Assist, locate the "Brightness" control in the settings menu. It allows you to increase or decrease the brightness level to suit your preference. Navigate to the settings by pressing the "Menu" button on the Video Assist, then use the arrow buttons to find the brightness control.

What is the maximum storage capacity supported by the Video Assist?

The Blackmagic Design Video Assist supports SD cards and UHS-II SD cards up to a maximum capacity of 256GB. Please ensure you are using a compatible SD card to avoid any potential issues with storage capacity.

Can I record audio using the Video Assist? If so, how?

Yes, you can record audio using the Video Assist. Connect your microphone or audio source to the audio input on the Video Assist using a standard 3.5mm jack. Ensure the audio input level is adjusted correctly in the settings menu to capture clear sound. Remember to monitor the audio levels during recording to ensure optimal audio quality.

How do I update the firmware on the Video Assist?

To update the firmware on your Video Assist, first, download the latest firmware from the official Blackmagic Design website onto a USB flash drive. Insert the USB drive into the USB port of the Video Assist. Navigate to the settings menu, find the "Firmware Update" option, and select it. The Video Assist will detect the firmware file on the USB drive and guide you through the update process.

Does Blackmagic Design Video Assist have an optical drive?

No, Blackmagic Design Video Assist does not have an optical drive. This means that the user cannot play CDs or DVDs directly on this device.

What is the display diagonal of Blackmagic Design Video Assist?

The display diagonal of Blackmagic Design Video Assist is 5 inches. This size allows for a compact and portable design.

Does Blackmagic Design Video Assist have a touchscreen?

Yes, Blackmagic Design Video Assist has a touchscreen. This feature enhances user experience and allows for easier navigation and control of the device.

Does Blackmagic Design Video Assist have a built-in speaker?

No, Blackmagic Design Video Assist does not have a built-in speaker. This means that the user will need external speakers or headphones to listen to audio.

How many HDMI ports does Blackmagic Design Video Assist have?

Blackmagic Design Video Assist has 2 HDMI ports. This allows for easy connectivity with other devices such as cameras or monitors.

Is the manual of the Blackmagic Design Video Assist available in English?

Yes, the manual of the Blackmagic Design Video Assist is available in English .

Is your question not listed? Ask your question here

No results