Blackmagic Design Video Assist manual

Blackmagic Design Video Assist
8.7 · 2
PDF manual
 · 848 pages
English
manualBlackmagic Design Video Assist
question sur le niveau XLR Micro. Les micros acheminent en général un signal plus faible que les
équipements dotés de sorties de niveau ligne. Le signal est légèrement amplifié par le Video Assist 7”
afin d’optimiser le niveau d’enregistrement. Si vous souhaitez éviter les entrées XLR analogiques et
conserver les signaux SDI ou HDMI intégrés aux canaux 1 et 2 de la source vidéo, sélectionnez
Vidéo. Sur le modèle 12G 7”, les indicateurs audio situés au-dessous de la sélection des sources
permettent de modifier le niveau de la source XLR.
REMARQUE Le Video Assist garde vos paramètres en mémoire même après le
redémarrage de l’appareil. N’oubliez pas de réinitialiser les paramètres audio lorsque vous
changez les connexions.

Atténuation XLR

Si vous tournez dans des environnements bruyants, vous pouvez régler la fonction Atténuation XLR
sur On. Cela permettra de réduire légèrement le niveau audio et d’obtenir une portée un peu plus
importante qui empêchera lécrêtage du son. Si vous tournez en condition normale, réglez cette
fonction sur Off.

Alimentation fantôme

Lorsque vous connectez des micros qui ne sont pas autonomes, vous pouvez les alimenter avec
l’alimentation fantôme via le connecteur XLR. Réglez simplement ce paramètre sur On.
REMARQUE Veillez à ce que lalimentation fantôme soit désactivée lorsque vous utilisez
des micros alimentés par batterie, car cela peut endommager certains micros.

Enregistrer des canaux audio

Le Blackmagic Video Assist 12G HDR peut enregistrer simultanément jusquà 16 canaux audio.
Choisissez le nombre de canaux à enregistrer de 2 à 16 canaux.

Menus de paramétrage

Moniteur

Le Video Assist comprend également des paramètres additionnels auxquels vous pouvez accéder
via les menus à onglets.

Si perte d’images

Lorsque vous utilisez des supports plus lents, tels que des cartes SD UHS-I, pour enregistrer dans
des formats à hautes fréquences d’images, il se peut qu’il y ait des pertes d’images. Selon votre
workflow, vous pourriez vouloir que l’enregistrement s’arrête lors d’une perte d’images.
Sur le Blackmagic Video Assist 12G HDR, faites cela en sélectionnant Stopper l’enregistrement.
Si vous souhaitez poursuivre l’enregistrement, mais être averti lors d’une perte d’images,
sélectionnez Alerter. Un point dexclamation s’affichera alors en bas à droite de l’écran.

Affichage LUT 3D

Déplacez le bouton Affichage LUT 3D pour l’activer ou le désactiver. Loption daffichage de
la LUT 3D sera désactivée lorsqu’aucune LUT n’est sélectionnée. Pour plus d’informations sur
le chargement d’une LUT, consultez la section « LUTs » de ce manuel.
186Modifier les paramètres

Manual

View the manual for the Blackmagic Design Video Assist here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Blackmagic Design Video Assist or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Blackmagic Design and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
J
James June 16, 2024

How to get hdmi input to sdi output

Blackmagic Design Video Assist specifications

Below you will find the product specifications and the manual specifications of the Blackmagic Design Video Assist.

The Blackmagic Design Video Assist is a video recording accessory specifically designed for professional use. With a compact size, it features a 5-inch display with a resolution of 1920 x 1080 pixels, providing sharp and clear visuals. The LED backlight ensures optimal brightness and visibility, making it suitable for various lighting conditions. Additionally, the touchscreen functionality allows for easy navigation and control. While it does not include a built-in speaker, it offers multiple connectivity options for audio playback. It has an HDMI output and headphone out port, enabling users to connect external speakers or headphones for monitoring purposes. Furthermore, it supports 6G-SDI input, providing flexibility for professional video production setups. In terms of storage, the Video Assist has one memory slot compatible with SD, SDHC, and SDXC memory cards. This allows for convenient and expandable storage options, ensuring ample space for recording and storing video files. With two HDMI ports, including one HDMI in port, the Video Assist allows for seamless integration with other devices, such as cameras or monitors. This enhances versatility and flexibility during video production, enabling real-time monitoring or signal routing. Overall, the Blackmagic Design Video Assist is a reliable and feature-rich video recording accessory. Its compact size, high-resolution display, touchscreen functionality, and multiple connectivity options make it a suitable choice for professional videographers and filmmakers.

General
BrandBlackmagic Design
ModelVideo Assist | HYPERD/AVIDAS5HD
Productspeaker
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Optical drive
Optical drive includedNo
Display
Display diagonal5 "
Display resolution1920 x 1080 pixels
LED backlightYes
TouchscreenYes
Aspect ratio16:9
Design
Product colorBlack
Built-in speaker(s)No
Storage
Number of memory slots1
Compatible memory cardsSD, SDHC, SDXC
Ports & interfaces
HDMI ports quantity2
HDMI in1
HDMI outputYes
Headphone outYes
6G‑SDI inputYes
6G‑SDI outputYes
Power connectorYes
USB 2.0 ports quantity1
Serial Digital Interface (SDI) standardSMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 425M
Power
Power supply typeBattery/DC
Input voltage12 V
Battery technologyLithium-Ion (Li-Ion)
Battery typeLP-E6
Packaging content
AC adapter includedYes
ManualYes
Software includedYes
Batteries includedNo
Bundled softwareDaVinci Resolve grading software
Weight & dimensions
Width143 mm
Depth30.5 mm
Height90 mm
Weight362 g
System requirements
Mac operating systems supportedMac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supportedWindows 10, Windows 8.1
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-21 - 45 °C
Operating relative humidity (H-H)0 - 90 %
Features
Analog signal format systemNTSC, PAL
Supported video modes720p, 1080i, 1080p, 2160p
Supported chroma subsampling4:2:2
SDI metadata supportHD RP188
Audio sampling rate48 kHz
Audio sampling rate24 bit
Color depth10 bit
Color gamutsBT.601, BT.709
Copy protectionYes
Supported codecsProRes 422 HQ, ProRes 422, ProRes422 LT, ProRes Proxy, DNxHD 220x, DNxHD 145, DNxHD 45, DNxHD 220xMXF, DNxHD 145 MXF, DNxHD 45MXF
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Blackmagic Design Video Assist below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the weight of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a weight of 362 g.

What is the screen size of the Blackmagic Design Video Assist?

The screen size of the Blackmagic Design Video Assist is 5 ".

What is the height of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a height of 90 mm.

What is the screen resolution of the display of the Blackmagic Design Video Assist?

The screen resolution of the Blackmagic Design Video Assist is 1920 x 1080 pixels.

What is the width of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a width of 143 mm.

What is the depth of the Blackmagic Design Video Assist?

The Blackmagic Design Video Assist has a depth of 30.5 mm.

How do I connect my Blackmagic Design Video Assist to my camera?

To connect the Video Assist to your camera, use the appropriate HDMI or SDI cable provided. The HDMI cable can plug into the "HDMI In" port on the Video Assist and the corresponding HDMI output on your camera. Alternatively, you can utilize an SDI cable by connecting it to the SDI input/output ports, ensuring the cable is securely attached on both ends.

How can I adjust the brightness of the screen on the Video Assist?

To adjust the brightness on your Video Assist, locate the "Brightness" control in the settings menu. It allows you to increase or decrease the brightness level to suit your preference. Navigate to the settings by pressing the "Menu" button on the Video Assist, then use the arrow buttons to find the brightness control.

What is the maximum storage capacity supported by the Video Assist?

The Blackmagic Design Video Assist supports SD cards and UHS-II SD cards up to a maximum capacity of 256GB. Please ensure you are using a compatible SD card to avoid any potential issues with storage capacity.

Can I record audio using the Video Assist? If so, how?

Yes, you can record audio using the Video Assist. Connect your microphone or audio source to the audio input on the Video Assist using a standard 3.5mm jack. Ensure the audio input level is adjusted correctly in the settings menu to capture clear sound. Remember to monitor the audio levels during recording to ensure optimal audio quality.

How do I update the firmware on the Video Assist?

To update the firmware on your Video Assist, first, download the latest firmware from the official Blackmagic Design website onto a USB flash drive. Insert the USB drive into the USB port of the Video Assist. Navigate to the settings menu, find the "Firmware Update" option, and select it. The Video Assist will detect the firmware file on the USB drive and guide you through the update process.

Does Blackmagic Design Video Assist have an optical drive?

No, Blackmagic Design Video Assist does not have an optical drive. This means that the user cannot play CDs or DVDs directly on this device.

What is the display diagonal of Blackmagic Design Video Assist?

The display diagonal of Blackmagic Design Video Assist is 5 inches. This size allows for a compact and portable design.

Does Blackmagic Design Video Assist have a touchscreen?

Yes, Blackmagic Design Video Assist has a touchscreen. This feature enhances user experience and allows for easier navigation and control of the device.

Does Blackmagic Design Video Assist have a built-in speaker?

No, Blackmagic Design Video Assist does not have a built-in speaker. This means that the user will need external speakers or headphones to listen to audio.

How many HDMI ports does Blackmagic Design Video Assist have?

Blackmagic Design Video Assist has 2 HDMI ports. This allows for easy connectivity with other devices such as cameras or monitors.

Is the manual of the Blackmagic Design Video Assist available in English?

Yes, the manual of the Blackmagic Design Video Assist is available in English .

Is your question not listed? Ask your question here

No results