View the manual for the Black & Decker GL7033 here, for free. This manual comes under the category grass trimmers and has been rated by 15 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Black & Decker GL7033 or do you need help? Ask your question here




The Black & Decker GL7033 grass trimmer is an electric AC-powered tool designed for efficient lawn maintenance. With a power of 700 W, it provides sufficient performance to tackle various grass trimming tasks. The trimmer features a 100 mm height adjustment capability, allowing users to easily adapt to different grass lengths. Its cutting diameter measures up to 330 mm, enabling users to cover a wide area with each pass. Equipped with a plant protector, this grass trimmer ensures that nearby plants and flowers are not accidentally harmed during operation. It utilizes a 2 mm line diameter, providing adequate cutting power without unnecessarily damaging the grass. The trimmer comes with 10 m of line length, allowing for extended use before needing to be refilled. Operating at a rotational speed of 7000 RPM, the trimmer efficiently cuts through grass with ease. It includes a secondary handle for improved maneuverability and control, reducing fatigue during use. Weighing 3200 g, it strikes a balance between sturdiness and portability. The Black & Decker GL7033 grass trimmer is sold individually, with one piece included per pack. With a robust construction and reliable design, this trimmer is built to withstand regular use over time. It offers a practical solution for maintaining a neat and well-groomed lawn without the hassle of manual labor.
| Brand | Black & Decker |
| Model | GL7033 | GL7033-QS |
| Product | grass trimmer |
| Language | English |
| Filetype | User manual (PDF) |
| Power | 700 W |
| Power source | Electric AC |
| Height adjustment | 100 mm |
| Cutting diameter (max) | 330 mm |
| Plant protector | Yes |
| Line diameter | 2 mm |
| Line length supplied | 10 m |
| Rotational speed | 7000 RPM |
| Secondary handle | Yes |
| Product color | Black, Red |
| Weight | 3200 g |
| Quantity per pack | 1 pc(s) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Black & Decker GL7033 below.
The Black & Decker GL7033 has a weight of 3200 g.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
First, ensure the trimmer is switched off and unplugged. Then, align the upper and lower handles, sliding the lower handle into the upper handle until they lock in place. Finally, tighten the handle screws securely using the included tools.
To adjust the cutting height, locate the height adjustment lever on the trimmer head. Push the lever forward or backward to select your desired cutting height. Ensure the lever clicks into place for a secure adjustment.
This can happen if the line spool is empty or if the line is jammed. First, ensure the trimmer is switched off and unplugged. Then, remove the spool cover and check if the line is tangled or jammed. If so, carefully remove any debris and reassemble the spool. If the spool is empty, replace it with a new spool of trimmer line.
Start by switching off and unplugging the trimmer. Locate the line spool cover and twist it counterclockwise to remove it. Take out the empty spool and replace it with a new one. Make sure to feed the line correctly through the guiding holes, following the arrows on the spool for the proper winding direction. Finally, reattach the spool cover by twisting it clockwise until it clicks into place.
If the trimmer starts to overheat during use, switch it off immediately and unplug it. Allow it to cool down for at least 15 minutes before continuing. Check for any obstructions around the motor vents and clear them if necessary. Overheating can occur due to prolonged use or cutting thick and dense vegetation, so it's essential to take regular breaks to prevent overheating.
Yes. This means that the grass trimmer can be plugged into a power outlet, providing a consistent and reliable source of power.
Yes. This height adjustment feature allows the user to customize the cutting height of the grass trimmer, resulting in a more precise and efficient trimming experience.
Yes. With a cutting diameter of 330 mm, the grass trimmer can cover a larger area in less time, making it suitable for trimming larger lawns.
Yes. The plant protector feature helps to prevent accidental damage to surrounding plants and vegetation while using the grass trimmer, ensuring a neat and tidy trimming result.
Yes. The inclusion of a secondary handle provides additional comfort and control during operation, making it easier for the user to maneuver the grass trimmer and achieve precise trimming results.
Yes, the manual of the Black & Decker GL7033 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Black & Decker and is the answer not in the manual?
Question and answer
Number of questions: 4Hello, please, how do I remove the cover to rewind the cutting line on this model?
This message has been automatically translatedThe line is not feeding automatically and is getting tangled in large pieces, what should I do?
This message has been automatically translatedI need a spare part for my Black & Decker GL 7033 Weed Wacker which uses the blue 'Heavy Duty Line' 10 pieces in a box, each 32 cm long. During use, the vibrations have caused the line on one side to cut through the grey plastic of the CAP. Unfortunately, I cannot find a picture of the inside of this Cap, which is of a special design compatible with the 32cm heavy duty line which has a black hexagon (side 8mm) at the centre. I also cannot find the actual Part No. of this CAP. I have found a photo of the outside of such a grey plastic cap, but there is no way to know if the design inside is compatible with the 32cm blue line. Please contact me with the full technical description and the Part No. Price, Availability and delivery to Switzerland. I would be grateful for urgent action due to interruption of my garden project. Many thanks. If you prove an upload link, I can seny photograps of the defective/damaged Cap. Best regards = John C. Crowther Street: Padrus 260 Town: Morissen Zip: 7143 Switzerland
How is the Handel removed to replace power lead