Bertazzoni KTI120PRO1XA manual

Bertazzoni KTI120PRO1XA
7.5 · 1
PDF manual
 · 12 pages
English
manualBertazzoni KTI120PRO1XA
2
N = 4x
(2,9x9,5)
L = 8x
(4,2x44,4)
I = 8x
M = 2x
(2,9x9,5 RST)
2x

Manual

View the manual for the Bertazzoni KTI120PRO1XA here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Bertazzoni KTI120PRO1XA or do you need help? Ask your question here

Need help?

Do you have a question about the Bertazzoni and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Bertazzoni KTI120PRO1XA specifications

Below you will find the product specifications and the manual specifications of the Bertazzoni KTI120PRO1XA.

General
BrandBertazzoni
ModelKTI120PRO1XA | KTI120PRO1XA
Productexhaust hood
EAN8054309282034
LanguageEnglish
FiletypeUser manual (PDF)
Lighting
Number of bulbs4 bulb(s)
Bulb typeLED
Design
Motor includedYes
Number of motors1
Built-in displayYes
Display typeLED
Control typeTouch
TypeIsland
Product colorStainless steel
TimerYes
Performance
Number of speeds3
Maximum extraction power700 m³/h
Intensive speedYes
Type of extractionDucted/Recirculating
Fluid dynamic efficiency class-
Lighting efficiency class-
Grease filtering efficiency class-
Noise level96 dB
Power
Energy efficiency classA
Annual energy consumption- kWh
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Motor power- W
Connected load270 W
Filtering
Filter cleaning indicatorYes
Grease filter typeStainless steel
Weight & dimensions
Width1198 mm
Depth599 mm
Height (min)630 mm
Height (max)820 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bertazzoni KTI120PRO1XA below.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

What is the width of the Bertazzoni KTI120PRO1XA?

The Bertazzoni KTI120PRO1XA has a width of 1198 mm.

What is the depth of the Bertazzoni KTI120PRO1XA?

The Bertazzoni KTI120PRO1XA has a depth of 599 mm.

What energy label does the Bertazzoni KTI120PRO1XA have?

The Bertazzoni KTI120PRO1XA has energy label A.

Is the manual of the Bertazzoni KTI120PRO1XA available in English?

Yes, the manual of the Bertazzoni KTI120PRO1XA is available in English .

Is your question not listed? Ask your question here

No results