BenQ W2000W manual

BenQ W2000W
5.4 · 1
PDF manual
 · 63 pages
English
manualBenQ W2000W
50
Maintenance

Replacing the lamp

To reduce the risk of electrical shock, always turn the projector off and disconnect the power cable
before changing the lamp.
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the
lamp.
To reduce the risk of injuries to fingers and damage to internal components, use caution when removing
lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not
touch the empty lamp compartment when the lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a
proper manner.
To assure optimal performance from the projector, it is recommended that you purchase a qualified
projector lamp for lamp replacement.
If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make
sure that no one is underneath the lamp socket to avoid any possible injury or damage to the human eyes
caused by fractured lamp.
Ensure good ventilation when handling broken lamps. We recommend that you use respirators, safety
glasses, goggles or face shield and wear protective clothing such as gloves.
1. Turn the power off and disconnect the projector from the power outlet. If the lamp is hot, avoid

burns by waiting for approximately 45 minutes until the lamp has cooled.

2. Loosen the screws that secure the lamp cover on the top

of the projector until the lamp cover loosens.

3. Remove the lamp cover from the projector.

4. Confirm a position of the lamp protection film to put a

new film on the same position later, then remove and

dispose of the lamp protection film.

Do not turn the power on with the lamp cover removed.
Do not insert your fingers between the lamp and the
projector as the sharp edges inside the projector may cause
injuries.

5. Disconnect the lamp connector from the projector as

illustrated.

6. Loosen the screw that secures the lamp.

7. Lift the handle so that it stands up.

2
1
3
4

Manual

View the manual for the BenQ W2000W here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the BenQ W2000W or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ W2000W specifications

Below you will find the product specifications and the manual specifications of the BenQ W2000W.

The BenQ W2000W video projector utilizes DLP projection technology to deliver high-quality visuals. It supports various video modes, including 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p, ensuring compatibility with different content sources. With a brightness of 2000 ANSI lumens and a contrast ratio of 15000:1, this projector delivers clear and vibrant images on screen. The native aspect ratio of 16:9 and a zoom ratio of 1.3:1 provide flexibility in adjusting the image size according to the viewing environment. The service life of the light source is 3500 hours in standard mode and extends to 6000 hours in economic mode, offering long-term usage without the need for frequent replacements. Featuring an offset of 105%, the projector supports graphics resolutions ranging from 640 x 480 (VGA) to 1920 x 1200 (WUXGA). The W2000W is tuned to achieve Rec. 709 color standards, ensuring accurate and lifelike color reproduction for a cinematic viewing experience. Additionally, the included WDP02 Wireless Full HD Kit enables convenient wireless projection in uncompressed 1080p resolution. In summary, the BenQ W2000W video projector combines advanced technology with precise color calibration to provide a high-quality home cinema experience.

General
BrandBenQ
ModelW2000W | 9H.Y1J77.18G
Productvideo projector
EAN4718755063046
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projection technologyDLP
Projector brightness2000 ANSI lumens
Contrast ratio (typical)15000:1
Number of colors1.073 billion colors
Native aspect ratio16:9
Keystone correction, vertical-30 - 30 °
Vertical scan range23 - 120 Hz
Horizontal scan range15 - 102 kHz
Screen size compatibility60 - 300 "
Projector native resolution1080p (1920x1080)
Projection distance- m
Video
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Analog signal format systemNTSC, PAL, SECAM
3DYes
Full HDYes
3D ReadyYes
HD-ReadyYes
Lens system
Focal length range16.88 - 21.88 mm
Aperture range (F-F)2.59 - 2.87
Throw ratio1.15 - 1.5:1
Zoom ratio1.3:1
Offset105 %
Vertical lens shift range0 - 10 °
Light source
Service life of light source (economic mode)6000 h
Service life of light source3500 h
Lamp power240 W
Light source typeLamp
Weight & dimensions
Width380.5 mm
Depth277 mm
Height121.7 mm
Weight3600 g
Features
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR
Noise level29 dB
Noise level (economic mode)27 dB
Ports & interfaces
VGA (D-Sub) ports quantity1
Composite video in1
Component video (YPbPr/YCbCr) in1
HDMI ports quantity3
Mobile High-Definition Link (MHL)Yes
PC Audio inYes
USB 2.0 ports quantity3
Serial interface typeRS-232
12V triggerYes
Audio (L/R) in1
S-Video inputs quantity-
DVI portNo
PC Audio outYes
AC (power) inYes
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers2
RMS rated power20 W
Packaging content
Handheld remote controlYes
ManualYes
Cables includedAC
Warranty cardYes
Quick start guideYes
Power
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Display
Built-in displayNo
Design
Product typeStandard throw projector
Product colorBeige, White
Market positioningHome cinema
PlacementDesktop, Ceiling
Network
Ethernet LAN (RJ-45) ports0
Ethernet LANNo
Wi-FiNo
Other features
RS-232 ports1
Storage
Card reader integratedNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ W2000W below.

What is the weight of the BenQ W2000W?

The BenQ W2000W has a weight of 3600 g.

What is the height of the BenQ W2000W?

The BenQ W2000W has a height of 121.7 mm.

What is the width of the BenQ W2000W?

The BenQ W2000W has a width of 380.5 mm.

What is the depth of the BenQ W2000W?

The BenQ W2000W has a depth of 277 mm.

Is the manual of the BenQ W2000W available in English?

Yes, the manual of the BenQ W2000W is available in English .

Is your question not listed? Ask your question here

No results