BenQ W2000W manual

BenQ W2000W
5.4 · 1
PDF manual
 · 63 pages
English
manualBenQ W2000W
41
Menu Functions

System Setup : Basic menu

Submenu Functions and Descriptions

Language

Sets the language for the On-Screen Display (OSD) menus.

Background Color

Sets the background color when there is no signal to the projector.

Splash Screen

Allows you to select which logo screen is displayed during projector start-up.
You can choose BenQ logo screen, Blue screen, or Black screen.

Projector Position

The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See Choosing a location for details.

Auto Off

Prevents unnecessary projection when no signal is detected for a long time.
See Setting Auto Off for details.

Direct Power On

When the function is set to On, the projector will be turned on automatically
once the power is fed through the power cable. When the function is set to
Off, you’ll have to turn on the projector by pressing on the projector or
on the remote control.

Menu Settings

Menu Type

Switches to the Basic OSD menu.

Menu Position

Sets the OSD menu position.

Menu Display Time

Sets the length of time the OSD will remain active after your last key press.

Blank Reminder Message

Sets whether the reminder message is displayed by the projector while the
image is hidden.

Source Rename

Renames the current input source to your desired name.
On the Source Rename window, use / / / to set the desired
characters for the connected source item.
When done, press OK to save the changes.

Auto Source

Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it acquires a
signal. If the function is set to Off, the projector will select the last used input
source.

Wireless IR Sync

Sets an IR frequency for the connected source devices when the Wireless FHD
kit is used. With the IR blaster cable, receiver, transmitter, and source devices
correctly connected, you can remotely control the source devices with their
remote controls at the receiver (projector) side.
The default IR blaster frequency is 47 KHz which is compatible with most
remote controls. Therefore, you need not change the IR frequency in most of
cases. See the Wireless FHD kit’s user documentation for more details.

Manual

View the manual for the BenQ W2000W here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the BenQ W2000W or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ W2000W specifications

Below you will find the product specifications and the manual specifications of the BenQ W2000W.

The BenQ W2000W video projector utilizes DLP projection technology to deliver high-quality visuals. It supports various video modes, including 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p, ensuring compatibility with different content sources. With a brightness of 2000 ANSI lumens and a contrast ratio of 15000:1, this projector delivers clear and vibrant images on screen. The native aspect ratio of 16:9 and a zoom ratio of 1.3:1 provide flexibility in adjusting the image size according to the viewing environment. The service life of the light source is 3500 hours in standard mode and extends to 6000 hours in economic mode, offering long-term usage without the need for frequent replacements. Featuring an offset of 105%, the projector supports graphics resolutions ranging from 640 x 480 (VGA) to 1920 x 1200 (WUXGA). The W2000W is tuned to achieve Rec. 709 color standards, ensuring accurate and lifelike color reproduction for a cinematic viewing experience. Additionally, the included WDP02 Wireless Full HD Kit enables convenient wireless projection in uncompressed 1080p resolution. In summary, the BenQ W2000W video projector combines advanced technology with precise color calibration to provide a high-quality home cinema experience.

General
BrandBenQ
ModelW2000W | 9H.Y1J77.18G
Productvideo projector
EAN4718755063046
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projection technologyDLP
Projector brightness2000 ANSI lumens
Contrast ratio (typical)15000:1
Number of colors1.073 billion colors
Native aspect ratio16:9
Keystone correction, vertical-30 - 30 °
Vertical scan range23 - 120 Hz
Horizontal scan range15 - 102 kHz
Screen size compatibility60 - 300 "
Projector native resolution1080p (1920x1080)
Projection distance- m
Video
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions640 x 480 (VGA), 1920 x 1200 (WUXGA)
Analog signal format systemNTSC, PAL, SECAM
3DYes
Full HDYes
3D ReadyYes
HD-ReadyYes
Lens system
Focal length range16.88 - 21.88 mm
Aperture range (F-F)2.59 - 2.87
Throw ratio1.15 - 1.5:1
Zoom ratio1.3:1
Offset105 %
Vertical lens shift range0 - 10 °
Light source
Service life of light source (economic mode)6000 h
Service life of light source3500 h
Lamp power240 W
Light source typeLamp
Weight & dimensions
Width380.5 mm
Depth277 mm
Height121.7 mm
Weight3600 g
Features
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR
Noise level29 dB
Noise level (economic mode)27 dB
Ports & interfaces
VGA (D-Sub) ports quantity1
Composite video in1
Component video (YPbPr/YCbCr) in1
HDMI ports quantity3
Mobile High-Definition Link (MHL)Yes
PC Audio inYes
USB 2.0 ports quantity3
Serial interface typeRS-232
12V triggerYes
Audio (L/R) in1
S-Video inputs quantity-
DVI portNo
PC Audio outYes
AC (power) inYes
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers2
RMS rated power20 W
Packaging content
Handheld remote controlYes
ManualYes
Cables includedAC
Warranty cardYes
Quick start guideYes
Power
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Display
Built-in displayNo
Design
Product typeStandard throw projector
Product colorBeige, White
Market positioningHome cinema
PlacementDesktop, Ceiling
Network
Ethernet LAN (RJ-45) ports0
Ethernet LANNo
Wi-FiNo
Other features
RS-232 ports1
Storage
Card reader integratedNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ W2000W below.

What is the weight of the BenQ W2000W?

The BenQ W2000W has a weight of 3600 g.

What is the height of the BenQ W2000W?

The BenQ W2000W has a height of 121.7 mm.

What is the width of the BenQ W2000W?

The BenQ W2000W has a width of 380.5 mm.

What is the depth of the BenQ W2000W?

The BenQ W2000W has a depth of 277 mm.

Is the manual of the BenQ W2000W available in English?

Yes, the manual of the BenQ W2000W is available in English .

Is your question not listed? Ask your question here

No results