BenQ TW535 manual

BenQ TW535
6.8 · 1
PDF manual
 · 73 pages
English
manualBenQ TW535
Maintenance
62

Replacing the lamp (FOR SERVICE PERSONNEL

ONLY)

Hg - Lamp contains mercury. Manage in accordance with local

disposal laws. See www.lamprecycle.org.

If lamp replacement is performed while the projector is suspended
upside-down from the ceiling, make sure that no one is underneath the
lamp socket to avoid any possible injury or damage to the human eyes
caused by fractured lamp.
To reduce the risk of electrical shock, always turn the projector off and
disconnect the power cord before changing the lamp.
To reduce the risk of severe burns, allow the projector to cool for at
least 45 minutes before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal
components, use caution when removing lamp glass that has shattered
into sharp pieces.
To reduce the risk of injuries to fingers and/or compromising image
quality by touching the lens, do not touch the empty lamp
compartment when the lamp is removed.
This lamp contains mercury. Consult your local hazardous waste
regulations to dispose of this lamp in a proper manner.
To assure optimal performance from the projector, it is recommended
that you purchase a BenQ projector lamp for lamp replacement.
Ensure good ventilation when handling broken lamps. We recommend
that you use respirators, safety glasses, goggles or face shield and wear
protective clothing such as gloves.

1. Turn the power off and disconnect the projector from the

power outlet. If the lamp is hot, avoid burns by waiting for

approximately 45 minutes until the lamp has cooled.

2. Loosen the screw on the lamp cover.

Manual

View the manual for the BenQ TW535 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the BenQ TW535 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
C
Carsten IversenFebruary 19, 2022

My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal. I think the problem is on the PC/windows

BenQ TW535 specifications

Below you will find the product specifications and the manual specifications of the BenQ TW535.

General
BrandBenQ
ModelTW535 | 9H.JJX77.34E
Productvideo projector
EAN4718755076480
LanguageEnglish
FiletypeUser manual (PDF)
Projector
Projector brightness3600 ANSI lumens
Projection technologyDLP
Projector native resolutionWXGA (1280x800)
Contrast ratio (typical)15000:1
Native aspect ratio16:10
Screen size compatibility30 - 300 "
Projection distance1.002 - 12.019 m
Vertical scan range23 - 120 Hz
Horizontal scan range15 - 102 kHz
Matrix typeDMD
Light source
Lamp typeUHP
Lamp power203 W
Service life of light source (economic mode)15000 h
Lamps quantity1 lamp(s)
Service life of light source5000 h
Light source typeLamp
Features
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HIN, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR
Noise level32 dB
Noise level (economic mode)29 dB
Lens system
Zoom ratio1.2:1
Zoom capabilityYes
Focal length range21.8 - 25.6 mm
Aperture range (F-F)2.46 - 2.66
Offset104 %
Throw ratio1.55 - 1.86‎
Multimedia
Built-in speaker(s)Yes
Number of built-in speakers1
RMS rated power2 W
Design
Product typeStandard throw projector
Product colorWhite
Cable lock slotYes
Cable lock slot typeKensington
Market positioningHome cinema
PlacementDesktop
Display
Built-in display-
Video
Analog signal format systemNTSC, PAL, SECAM
Full HDNo
3DYes
Supported graphics resolutions640 x 480 (VGA), 1280 x 800 (WXGA), 1920 x 1200 (WUXGA)
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Power
Power sourceAC
Power consumption (typical)252 W
Power consumption (standby)0.5 W
Power consumption (max)260 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (economy mode)211 W
Ports & interfaces
VGA (D-Sub) ports quantity3
HDMI ports quantity2
Composite video in1
Component video (YPbPr/YCbCr) in1
DVI portNo
USB 2.0 ports quantity0
Audio (L/R) in-
S-Video inputs quantity-
PC Audio inYes
AC (power) inYes
PC Audio outYes
Mini-USB 2.0 ports quantity1
PC in (D-Sub)Yes
Serial interface typeRS-232
Network
Ethernet LAN (RJ-45) ports1
Smart TV-
Ethernet LANYes
Wi-Fi-
Other features
RS-232 ports1
Weight & dimensions
Weight2410 g
Width332.4 mm
Depth214.3 mm
Height99 mm
Packaging content
Handheld remote controlYes
Cables includedAC, HDMI, VGA
Batteries includedYes
Quick start guideYes
Warranty cardYes
Storage
Card reader integratedNo
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Operating altitude0 - 1499 m
Logistics data
Harmonized System (HS) code85286200
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ TW535 below.

What is the weight of the BenQ TW535?

The BenQ TW535 has a weight of 2410 g.

What is the height of the BenQ TW535?

The BenQ TW535 has a height of 99 mm.

What is the width of the BenQ TW535?

The BenQ TW535 has a width of 332.4 mm.

What is the depth of the BenQ TW535?

The BenQ TW535 has a depth of 214.3 mm.

Is the manual of the BenQ TW535 available in English?

Yes, the manual of the BenQ TW535 is available in English .

Is your question not listed? Ask your question here

No results