The On-Screen Display (OSD) menus can be set according to your preferences. The
following settings do not affect the projection settings, operation, or performance.
•Menu display Time in the SYSTEM SETUP: Basic > Menu Settings menu
sets the length of time the OSD will remain active after your last key press. The
time length ranges from 5 to 30 seconds in 5-second increments. Use / to
select a suitable time frame.
•Menu Position in the SYSTEM SETUP: Basic > Menu Settings menu sets
the OSD position in five locations. Use / to select a preferred position.
•Language in the SYSTEM SETUP: Basic menu sets your familiar language for
the OSD menus. See
"Using the menus" on page 30 for details.
•Reminder message in the SYSTEM SETUP: Basic > Menu Settings menu
sets whether to display reminder messages on screen. Use / to select your
desired setting.
•Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo
screen to be displayed during projector start-up. Use / to select a screen.
•Fan Speed Mode in the SYSTEM SETUP: Advanced menu is used when the
projector is installed a filter cover. Use / to set to High. See
"Indicators" on
page 65
for details.
Select the lamp saver mode
•Using the remote control.
Press SMART ECO to select Normal/
Economic/SmartEco.
•Using the OSD menu.
1.Go to SYSTEM SETUP: Advanced >
Lamp Settings > Lamp Mode.
2.Press / to select Normal/Economic/
SmartEco. The lamp brightness vary from
the different lamp mode,see the description list in table below.
If the Economic mode or SmartEco mode is selected, the light output will
be reduced and result in darker projected pictures.
Lamp ModeDescription
NormalProvides full lamp brightness
Economic
Lowers brightness to extend the lamp life and decreases the
fan noise
SmartEco
Adjusts the lamp power automatically depending on the
content brightness level
Manual
View the manual for the BenQ TW535 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the BenQ TW535 or do you need help? Ask your question here
Do you have a question about the BenQ and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
C
Carsten IversenFebruary 19, 2022
My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal.
I think the problem is on the PC/windows
+3
BenQ TW535 specifications
Below you will find the product specifications and the manual specifications of the BenQ TW535.
Need help?
Do you have a question about the BenQ and is the answer not in the manual?
Question and answer
Number of questions: 1My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal. I think the problem is on the PC/windows