We recommend you use the High Altitude Mode when your environment is 1500
m –3000 m above sea level, and ambient temperature is between 0°C–35°C.
Do not use the High Altitude Mode if your altitude is between 0 m and
1500 m and ambient temperature is between 0°C and 35°C. The projector
will be over cooled, if you turn the mode on under such a condition.
To activate the High Altitude Mode:
1.Press MENU and then press / until the SYSTEM SETUP: Advanced
menu is highlighted.
2.Press to highlight High Altitude Mode and press / to select On. A
confirmation message displays.
3.Highlight Yes and press OK.
Operation under "High Altitude Mode" may cause a higher decibel operating noise
level because of increased fan speed necessary to improve overall system cooling and
performance.
If you use this projector under other extreme conditions excluding the above, it may
display auto shut-down symptoms, which is designed to protect your projector from
over-heating. In cases like this, you should switch to High Altitude mode to solve
these symptoms. However, this is not to state that this projector can operate under
any and all harsh or extreme conditions.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s).
Be sure you have made a correct connection to the projector audio input. See
"Connection" on page 20 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound, press on
the remote control, or:
1.Press MENU and then press / until
the SYSTEM SETUP: Advanced menu
is highlighted.
2.Press to highlight Audio Settings and
press OK. The Audio Settings page
displays.
3.Highlight Mute and press / to select On.
Adjusting the sound level
To adjust the sound level, press VOL / on
the remote control, or:
1.Repeat steps 1-2 above.
2.Press to highlight Volume and press
/ to select a desired sound level.
Manual
View the manual for the BenQ TW535 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the BenQ TW535 or do you need help? Ask your question here
Do you have a question about the BenQ and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
C
Carsten IversenFebruary 19, 2022
My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal.
I think the problem is on the PC/windows
+3
BenQ TW535 specifications
Below you will find the product specifications and the manual specifications of the BenQ TW535.
Need help?
Do you have a question about the BenQ and is the answer not in the manual?
Question and answer
Number of questions: 1My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal. I think the problem is on the PC/windows