Press the ECO BLANK button from projector or remote control to turn off the
image for a period of time with up to 70% lamp power saving. Press any key on the
projector or remote control to restore the image.
•Eco Blank: Save up 70% of your lamp power.
Time to do your part in saving the planet.
When this function is activated with an audio
input connected,the audio can still be heard.
The automatic switch to ECO BLANK Mode
after the projector is turned on for over three
minutes without a display source, eliminating
unnecessary energy waste and prolonging the life
of the projector lamp
You can set the blank time in the SYSTEM SETUP: Basic > Operation Settings
> Blank Timer menu to let the projector return the image automatically after a
period of time when there is no action taken on the blank screen. The length of time
can be set from 5 to 30 minutes in 5-minute increments.
Do not block the projection lens from projecting as this could cause the
blocking object to become heated.
Freezing the image
Press FREEZE on the remote control to freeze
the image. The word 'FREEZE' will display in the
screen.
To release the function, press any key
(except the PAGE key) on the projector or
remote control.
Even if an image is frozen on the screen, the
pictures are running on the video or other device.
If the connected devices have active audio output,
you will still hear the audio even though the image
is frozen on screen.
Manual
View the manual for the BenQ TW535 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the BenQ TW535 or do you need help? Ask your question here
Do you have a question about the BenQ and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
C
Carsten IversenFebruary 19, 2022
My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal.
I think the problem is on the PC/windows
+3
BenQ TW535 specifications
Below you will find the product specifications and the manual specifications of the BenQ TW535.
Need help?
Do you have a question about the BenQ and is the answer not in the manual?
Question and answer
Number of questions: 1My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal. I think the problem is on the PC/windows