If the password function is activated, you will be
asked to enter the six-digit password every time
you turn on the projector. If you enter the wrong
password, the password error message as pictured
to the right displays lasting for three seconds, and
the message 'INPUT PASSWORD' follows. You
can retry by entering another six-digit password, or
if you did not record the password in this manual, and you absolutely do not
remember it, you can use the password recall procedure. See
"Entering the password
recall procedure" on page 32 for details.
If you enter an incorrect password 5 times in succession, the projector will
automatically shut down in a short time.
Entering the password recall procedure
1.Press and hold Auto on the projector or
remote control for 3 seconds. The projector
will display a coded number on the screen.
2.Write down the number and turn off your
projector.
3.Seek help from the local BenQ service center
to decode the number. You may be required
to provide proof of purchase documentation
to verify that you are an authorized user of the projector.
Changing the password
1.Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security
Settings > Change Password menu.
2.Press OK. The message 'INPUT CURRENT PASSWORD' displays.
3.Enter the old password.
•If the password is correct, another message 'INPUT NEW PASSWORD'
displays.
•If the password is incorrect, the password error message displays. You can
press MENU to cancel the change or try another password.
4.Enter a new password.
IMPORTANT: The digits being input will display as asterisks on-screen.
Write your selected password down here in this manual in advance or
right after the password is entered so that it is available to you should you
ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5.Confirm the new password by re-entering the new password.
Manual
View the manual for the BenQ TW535 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the BenQ TW535 or do you need help? Ask your question here
Do you have a question about the BenQ and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
C
Carsten IversenFebruary 19, 2022
My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal.
I think the problem is on the PC/windows
+3
BenQ TW535 specifications
Below you will find the product specifications and the manual specifications of the BenQ TW535.
Need help?
Do you have a question about the BenQ and is the answer not in the manual?
Question and answer
Number of questions: 1My BenQ TW535 projector does not receive signal from my PC running Windows 10 Home edition. I have tried using USB and connection via HDMI. My PC register a connection but no signal. I think the problem is on the PC/windows