BenQ RP8601K manual

BenQ RP8601K
5.8 · 1
PDF manual
 · 86 pages
English
manualBenQ RP8601K
Important safety instructions 3
• Avoid placing the display in direct sun or where direct sun or spot lighting will shine
onto the LCD panel, as the heat may damage the panel and the external casing of the
display, and the bright light will make viewing the display more difficult than necessary.
• The LCD panel consists of individual pixels to display images and is manufactured
according to the design specifications. While 99.9% of these pixels work normally,
0.01% of the pixels may remain constantly lit (in red, blue or green) or unlit. This is a
technical limitation of the LCD technology and is not a defect.
• LCD screens, like plasma (PDP) and conventional CRT (Cathode Ray Tube) screens, are
also susceptible to 'screen burn-in' or 'image retention' which can be found on the
screen as visible fixed lines and shades. To avoid such damage to the screen, avoid
displaying still images (like On-Screen Display menus, TV station logos, fixed/inactive
text or icons) for more than 30 minutes. Change the aspect ratio from time to time. Fill
the entire screen with the image and eliminate the black bars whenever possible. Avoid
displaying images in 16:9 aspect ratio over a long period of time, otherwise there may
be visible burn marks on the screen as two vertical lines.
Note: Under certain circumstances, condensation may occur on the inner side of the
cover glass, it's a natural phenomenon and will not affect the operation of the display.
This condensation will usually disappear after around 2 hours of normal operation.
• RP series does not offer image retention function, for more information, please refer to
installation guide. If a still image is required for a display, it is recommended to enable
Pixel shift. See More settings on page 37 for more information.
• RP series does not support portrait use; portrait use may cause display damage. BenQ
warranty will not cover faulty usage.

Safety notice for remote control

• Do not put the remote control in the direct heat, humidity, and avoid fire.
• Do not drop the remote control.
• Do not expose the remote control to water or moisture. Failure to do so could result
in malfunction.
• Confirm there is no object between the remote control and the remote sensor of the
product.
• When the remote control will not be used for an extended period, remove the
batteries.

Battery safety notice

The use of the wrong type of batteries may cause chemical leaks or explosion. Please
note the following:
• Always ensure that the batteries are inserted with the positive and negative terminals in
the correct direction as shown in the battery compartment.
• Different types of batteries have different characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life
or cause chemical leaks from the old batteries.
• When batteries fail to function, replace them immediately.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter
seeps out of the batteries, wipe it up immediately using a dry cloth, and replace the
batteries as soon as possible.

Manual

View the manual for the BenQ RP8601K here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the BenQ RP8601K or do you need help? Ask your question here

Need help?

Do you have a question about the BenQ and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

BenQ RP8601K specifications

Below you will find the product specifications and the manual specifications of the BenQ RP8601K.

General
BrandBenQ
ModelRP8601K | 9H.F4TTK.DE2
Productmonitor
EAN4718755075353, 5054444236513, 4718755080302, 4544438080266
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)
Display
Display diagonal86 "
Response time8 ms
Display brightness400 cd/m²
Contrast ratio (typical)1200:1
Display resolution3840 x 2160 pixels
Viewing angle, vertical178 °
Viewing angle, horizontal178 °
Color gamut65 %
Display technologyLED
HD type4K Ultra HD
TouchscreenYes
LED backlighting typeDirect-LED
Panel life30000 h
Color depth10 bit
Number of simultaneous touchpoints20
Display resolution3840 x 2160 pixels
Response time8 ms
Contrast ratio (typical)1200:1
Viewing angle, horizontal178 °
Viewing angle, vertical178 °
Backlight typeDirect LED
LED backlightYes
Number of simultaneous touchpoints20
Color gamut65 %
Screen shapeFlat
TouchscreenYes
Display diagonal86 "
Display brightness400 cd/m²
Touchscreen technologyInfrared
Touch technologyMulti-touch
HD type4K Ultra HD
Display technologyLED
Panel type-
Native aspect ratio-
Maximum refresh rate- Hz
Display number of colors-
RGB color spaceNTSC
Touchscreen technologyInfrared
Design
OrientationHorizontal
VESA mountingYes
Panel mounting interface700 x 400 mm
Product designInteractive flat panel
Product colorBlack
Placement supportedIndoor
Product colorBlack
Market positioning-
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)383 W
Power consumption (standby)0.5 W
Power consumption (typical)383 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
-
-
- kWh
- kWh
Power consumption (standby)0.5 W
Ports & interfaces
Ethernet LANYes
USB portYes
RS-232 interfaceYes
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
Microphone inYes
VGA (D-Sub) input ports1
HDMI ports quantity4
HDMI version2.0
DisplayPorts quantity1
Ethernet LAN (RJ-45) ports1
DVI portNo
HDMI ports quantity4
DisplayPorts quantity1
DVI portNo
HDMI version2.0
HDMIYes
Built-in USB hubYes
Headphone outYes
Wi-FiNo
Computer system
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
Mac operating systems supportedMac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra
Linux operating systems supportedUbuntu 16.04
Computer systemNo
Built-in processorNo
Audio
Built-in speaker(s)Yes
Number of built-in speakers2
RMS rated power32 W
Other features
Microphone connectivity3.5 mm
Quick start guideYes
Placement supportedIndoor
Ethernet LAN (RJ-45) ports1
Backlight typeDirect LED
Depth (without stand)141.9 mm
Height (without stand)1241.6 mm
Weight (without stand)85500 g
Weight & dimensions
Width2000.6 mm
Depth141.9 mm
Height1241.6 mm
Weight85500 g
Width (without stand)2000.6 mm
Depth (without stand)141.9 mm
Height (without stand)1241.6 mm
Weight (without stand)85500 g
Packaging data
Package weight98000 g
Package weight98000 g
Performance
PurposeEducation
On Screen Display (OSD)Yes
Number of OSD languages25
On Screen Display (OSD) languagesARA, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, JPN, KOR, NOR, PER, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
Mac operating systems supportedMac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra
Linux operating systems supportedUbuntu 16.04
NVIDIA G-SYNCNo
AMD FreeSyncNo
Packaging content
Cables includedAC, HDMI, USB, VGA
Stylus penYes
Number of stylus pens2
Cables includedAC, HDMI, USB, VGA
Quick start guideYes
Ergonomics
On Screen Display (OSD)Yes
Panel mounting interface700 x 400 mm
Number of OSD languages25
On Screen Display (OSD) languagesARA, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, JPN, KOR, NOR, PER, POL, POR, RUM, RUS, SWE, THA, TUR, VIE
VESA mountingYes
Height adjustmentNo
Cable lock slot-
Multimedia
Built-in speaker(s)Yes
RMS rated power32 W
Built-in camera-
Network
Ethernet LANYes
Logistics data
Harmonized System (HS) code85285210
Harmonized System (HS) code85285210
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ RP8601K below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

What is the weight of the BenQ RP8601K?

The BenQ RP8601K has a weight of 85500 g.

What is the screen size of the BenQ RP8601K?

The screen size of the BenQ RP8601K is 86 ".

What is the height of the BenQ RP8601K?

The BenQ RP8601K has a height of 1241.6 mm.

What is the screen resolution of the display of the BenQ RP8601K?

The screen resolution of the BenQ RP8601K is 3840 x 2160 pixels.

What is the width of the BenQ RP8601K?

The BenQ RP8601K has a width of 2000.6 mm.

What is the depth of the BenQ RP8601K?

The BenQ RP8601K has a depth of 141.9 mm.

Is the manual of the BenQ RP8601K available in English?

Yes, the manual of the BenQ RP8601K is available in English .

Is your question not listed? Ask your question here

No results