View the manual for the BenQ PW9520 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the BenQ PW9520 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the BenQ PW9520.




| Brand | BenQ |
| Model | PW9520 | 9H.JDF77.26E |
| Product | video projector |
| EAN | 0840046032326, 4718755057250 |
| Language | English |
| Filetype | User manual (PDF) |
| Projector brightness | 6000 ANSI lumens |
| Projection technology | DLP |
| Projector native resolution | WXGA (1280x720) |
| Screen size compatibility | 80 - 500 " |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Contrast ratio (typical) | 2800:1 |
| Number of colors | 1.073 billion colors |
| Keystone correction, horizontal | -30 - 30 ° |
| Keystone correction, vertical | -30 - 30 ° |
| Vertical scan range | 23 - 85 Hz |
| Horizontal scan range | 31 - 92 kHz |
| Matrix size | 0.7 " |
| Matrix type | 3-panel (p-Si TFT active) |
| Zoom ratio | 1.3:1 |
| Focal length range | 26 - 34 mm |
| Aperture range (F-F) | 1.64 - 1.86 |
| Horizontal lens shift range | -10 - 10 % |
| Vertical lens shift range | 0 - 50 % |
| Throw ratio | 1.81 - 2.38 |
| Service life of light source | 2500 h |
| Service life of light source (economic mode) | 3000 h |
| Lamp power | 280 W |
| Light source type | Lamp |
| Analog signal format system | NTSC, PAL, SECAM |
| Full HD | No |
| 3D | No |
| Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1200 (WUXGA) |
| VGA (D-Sub) ports quantity | 1 |
| HDMI ports quantity | 1 |
| USB 2.0 ports quantity | 1 |
| Composite video in | 1 |
| Component video (YPbPr/YCbCr) in | 0 |
| HDMI version | 1.4 |
| PC in (D-Sub) | Yes |
| DVI port | Yes |
| Remote (IR) output | 2 |
| S-Video inputs quantity | 1 |
| 12V trigger | Yes |
| Audio (L/R) in | 0 |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN | Yes |
| Wi-Fi | - |
| RS-232 ports | 1 |
| Card reader integrated | No |
| HDCP | Yes |
| Preset modes | Game, Presentation, Standard |
| On Screen Display (OSD) | Yes |
| On Screen Display (OSD) languages | CHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS, SWE |
| Noise level | 39 dB |
| Noise level (economic mode) | 34 dB |
| Built-in speaker(s) | No |
| Product color | Gray |
| Product type | Large venue projector |
| Placement | Desktop, Ceiling |
| Built-in display | No |
| Power source | AC |
| Power consumption (typical) | 670 W |
| Power consumption (standby) | 0.5 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Width | 505 mm |
| Height | 194 mm |
| Depth | 385 mm |
| Weight | 16500 g |
| Handheld remote control | Yes |
| Cables included | AC, VGA |
| Quick start guide | Yes |
| Manual | Yes |
| Warranty card | Yes |
| Harmonized System (HS) code | 85286200 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the BenQ PW9520 below.
The BenQ PW9520 has a weight of 16500 g.
The BenQ PW9520 has a height of 194 mm.
The BenQ PW9520 has a width of 505 mm.
The BenQ PW9520 has a depth of 385 mm.
Yes, the manual of the BenQ PW9520 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the BenQ and is the answer not in the manual?
Question and answer
Number of questions: 0